Globaltech Corporation Pty Ltd v Australian Mud Company Pty Ltd

Link copied
Case Copied 80 min read

FEDERAL COURT OF AUSTRALIA

Globaltech Corporation Pty Ltd v Australian Mud Company Pty Ltd [2019] FCAFC 162

Appeal from: Australian Mud Company Pty Ltd v Globaltech Corporation Pty Ltd [2018] FCA 1839
File number: NSD 98 of 2019
Judges: KENNY, ROBERTSON AND MOSHINSKY JJ
Date of judgment: 13 September 2019
Catchwords: PATENTS – construction – where claims in suit comprised method claims and system claims for core sample orientation – where the method in claim 1 involved two timers, one in the downhole device and one on the surface – whether the primary judge erred in his construction of the patent – whether, on the true construction of claim 1, it required both the downhole timer and the surface timer to count with reference to the same initial reference time – whether the word “beyond” meant no more than “after” or “later than” – appeal dismissed
Legislation:

Intellectual Property Laws Amendment (Raising the Bar) Act 2012 (Cth)

Patents Act 1990 (Cth), s 40

Patents Regulations 1991 (Cth)

Cases cited:

Branir Pty Ltd v Owston Nominees (No 2) Pty Ltd (2001) 117 FCR 424

CCOM Pty Ltd v Jiejing Pty Ltd (1994) 51 FCR 260

Davies v Lazer Safe Pty Ltd [2019] FCAFC 65

Dincel Construction System Pty Ltd v AFS Systems Pty Ltd (2018) 360 ALR 273

Fei Yu (t/as Jewels 4 Pools) v Beadcrete Pty Ltd (2014) 107 IPR 516

H Lundbeck A/S v Alphapharm Pty Ltd (2009) 177 FCR 151

Interlego AG v Toltoys Pty Ltd (1973) 130 CLR 461

Jupiters Ltd v Neurizon Pty Ltd (2005) 222 ALR 155

Kimberly-Clark Australia Pty Ltd v Arico Trading International Pty Ltd (2001) 207 CLR 1

Lockwood Security Products Pty Ltd v Doric Products Pty Ltd (2004) 217 CLR 274

Martin v Scribal Pty Ltd (1954) 92 CLR 17

Monsanto Co v Commissioner of Patents (1974) 48 ALJR 59

Nichia Corporation v Arrow Electronics Australia Pty Ltd [2019] FCAFC 2

Ransburg Co v Aerostyle Ltd [1968] RPC 287

Rehm Pty Ltd v Websters Security Systems (International) Pty Ltd (1988) 81 ALR 79

Sigma Pharmaceuticals (Australia) Pty Ltd v Wyeth (2011) 119 IPR 194

Société des Usines Chimiques Rhône-Poulenc v Commissioner of Patents (1958) 100 CLR 5

Welch Perrin & Co Pty Ltd v Worrel (1961) 106 CLR 588

Date of hearing: 22 and 23 May 2019
Registry: New South Wales
Division: General Division
National Practice Area: Intellectual Property
Sub-area: Patents and Associated Statutes
Category: Catchwords
Number of paragraphs: 149
Counsel for the Appellants: Ms K Howard SC with Mr A Fox
Solicitor for the Appellants: Watermark Intellectual Property Lawyers
Counsel for the Respondents: Mr C Dimitriadis SC with Ms F St John
Solicitor for the  Respondents: Gilbert and Tobin

ORDERS

NSD 98 of 2019
BETWEEN:

GLOBALTECH CORPORATION PTY LTD (ACN 087 281 418)

First Appellant

GLOBALTECH PTY LTD (ACN 086 012 393)

Second Appellant

AND:

AUSTRALIAN MUD COMPANY PTY LTD (ACN 009 283 416)

First Respondent

REFLEX INSTRUMENTS ASIA PACIFIC PTY LTD (ACN 124 204 191)

Second Respondent

JUDGES:

KENNY,…

CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Globaltech Corporation Pty Ltd v Australian Mud Company Pty... and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2019] FCAFC 162
Decision Date

CaseChat Overview and Summary

Globaltech Corporation Pty Ltd sought to appeal against the decision of the primary judge in Australian Mud Company Pty Ltd v Globaltech Corporation Pty Ltd, which involved claims of patent infringement. The appeal centred on the interpretation of certain claims in the patent, specifically those related to a method and system for core sample orientation. The central issue was whether the primary judge had correctly interpreted the claims, particularly in relation to the requirement of two timers, one in the downhole device and one on the surface, counting from the same initial reference time.

The legal issues before the court involved determining the proper construction of the patent claims, particularly claim 1, and whether the primary judge's interpretation of the term "beyond" and the phrase "inputting the specific time beyond the reference time" was correct. The court had to decide if the primary judge's construction of the patent claims led to an accurate understanding of the invention and whether the interpretation of these terms was consistent with the specification and the state of the art.

The court found that the primary judge did not err in his construction of the patent claims. The court held that the specification provided a clear and reasonably detailed disclosure of the invention, and the claims followed the terms of the description. The court further determined that the primary judge's interpretation of the term "beyond" and the phrase "inputting the specific time beyond the reference time" was consistent with the overall context of the patent and the state of the art. The court rejected Globaltech's argument that the primary judge should have construed the claims to require both timers to reference the same initial time. The court found no merit in the appeal and dismissed it.

The court also ordered that Globaltech pay the costs of the appeal, including the costs of their interlocutory application for leave to appeal. This decision underscores the importance of the proper interpretation of patent claims and the need for consistency between the claims and the specification.

Orders

Orders of the court

1. The appellants’ application for leave to amend their notice of appeal be dismissed.

2. The appeal be dismissed.

3. The appellants pay the respondents’ costs of the appeal (including the costs of the appellants’ interlocutory application for leave to appeal (and an extension of time in which to seek leave to appeal) dated 1 February 2019), as agreed or assessed.

Note: Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.

Background

Background to the litigation

Evidence

Evidence Before The Court

Decision

Reasons for decision

In our view, the primary judge did not err in concluding that the claims are fairly based. The specification contains a “real and reasonably clear” disclosure of the invention: Lockwood (No 1). The claims follow the terms of the description in the “Disclosure of the Invention” section of the Patent, and there is nothing in the balance of the description suggesting that the invention is narrower: see Lockwood (No 1) at [99]. The detailed description in the best method section does not provide any inconsistency. The statement in Lockwood (No 1) at [92], relied on by Globaltech, needs to be read in context. The High Court merely said that a particular contention “might have force” if nothing else in the specification supported the consistory clause. Further, at [93], the High Court noted that there were examples of cases in which courts have treated the consistory clause as disclosing the invention. We do not agree with the submission that the present case is analogous to Nichia v Arrow. The wording of the claim and the issues are quite different. Additionally, the paragraph relied on by Globaltech ([64]) did not involve a decision on the issue.Conclusion For these reasons, the appeal is to be dismissed. There is no apparent reason why costs should not follow the event. We will also make a costs order to this effect.

Ratio Decidendi

Legal Principle Established

The primary judge dealt with Globaltech’s challenge to the validity of the Patent at [334]-[523] of the Reasons. The grounds of invalidity relied on by Globaltech and dealt with in this section of the Reasons were lack of novelty and lack of inventive step. The primary judge rejected each of these grounds. Globaltech does not challenge the primary judge’s conclusions on lack of novelty and lack of inventive step.Declarations and orders made by the primary judge On 14 December 2018, the primary judge made declarations, including a declaration to the effect that Globaltech had infringed the claims in suit. The primary judge also made an order permanently restraining Globaltech from infringing the Patent in Australia during the term of the Patent, including by, without the licence of AMC, engaging in certain conduct specified in the order (paragraph 4 of the orders). The primary judge also made orders: for destruction of certain Orifinder tools (paragraph 6 of the orders); that there be an inquiry as to damages or profits (paragraph 8); and that Globaltech pay AMC’s costs of the proceeding to date (paragraph 9). Subsequently, the primary judge made a lump sum costs order in relation to these costs.The appeal Globaltech appeals from part of the judgment given on 26 November 2018 and paragraphs 4, 6, 8 and 9 of the orders made on 14 December 2018. Out of an abundance of caution, Globaltech filed an interlocutory application seeking leave to appeal (and an extension of time in which to seek leave to appeal), in case the orders of the primary judge were considered interlocutory. At the hearing of the appeal, the Court granted Globaltech leave to appeal (and an extension of time) insofar as necessary. The grounds in Globaltech’s notice of appeal (omitting particulars) are as follows:1.The primary judge erred (at J [266]) in finding and holding that the Orifinder v5 infringed claims 1, 2-4, 7-10, 16-17, 21-24, 27-28, 33-40, 46-48, 54 and 65 of Australian Standard Patent No. 2010200162 (the Patent).2.The primary judge erred in his approach to construction of the claims of the Patent.3.The primary judge erred in finding and holding (J [207], [258], [259]) that claim 1 was not limited to a system involving two timers that each noted the same initial reference time at the beginning of drilling operations and counted from that time. Further:(a)The primary judge erred in finding (J [207]) that claim 1 was not so limited because the specification and claims did not use the word “synchronisation”.(b)The primary judge erred (eg. J [242]-[265]) in construing individual phrases (such as “initial reference time” and “inputting the specific time beyond the reference time”) in claim 1, rather than construing claim 1 having regard to all of its integers and the specification as a whole.(c)The primary judge erred in finding (J [249], [258], [265]) that the “initial reference time” in step 2 of claim 1 included the start of the timer in the downhole device but did not necessarily refer to the start of the surface timer (cf J [286]).(d)The primary judge erred in not construing the term “specific time”, despite commenting that “a question arises as to the meaning of ‘specific time’” (J [250]).(e)The primary judge erred in finding (J [265]) that the Orifinder v5 involved the inputting of a specific time within step 3 of claim 1 and fell within step 5 of claim 1 “when that step is considered alone”.(f)The primary judge erred in finding (J [258], [265]) that the word “beyond” in the phrase “beyond the reference time” in step 3 of claim 1 did not mean anything more than after or later than, such that the inputted specific time was not referable to the initial reference time.(g)The primary judge erred by reading words into claim 1 to limit the initial reference time to only one of the two timers, being the downhole timer (cf J [247]).(h)The primary judge erred in not accepting the opinions expressed by the Appellants’ experts (J [258]).(i)The primary judge ought to have found that Professor Tapson’s evidence that “instants in time” in claim 2 were time-stamped data records (J [302]) supported the Appellants’ construction of claim 1 and that dependent claim 6 requires (as for claim 1) the inputting of a ‘specific time beyond the reference time’.4.The primary judge ought to have found and held that the Orifinder v5 did not infringe claims 1, 2-4, 7-10, 16-17, 21-24, 27-28, 33-40, 46-48, 54 and 65 of the Patent.5.The primary judge ought to have found and held that:(a)When construed in the context of the specification as a whole and the state of the art, claim 1 is to a system involving two timers that each note the same initial reference time at the beginning of drilling operations (cf. J [248]).(b)The only reasonable construction of the words “initial reference time” in claim 1 (cf. J [247]) is that they refer to the same time on each of the downhole timer and the surface timer, which does not involve reading words into the claim.(c)The only reasonable construction of the words “inputting the specific time beyond the reference time” in claim 1 (cf. J [250 ff]) is that they refer to a time which is referable to the initial reference time, which does not involve reading words into the claim.6.If the primary judge had properly construed claim 1 as contended for by the Appellants, the primary judge would have found and held that the Orifinder v5 did not infringe the Patent (J [163]).7.The primary judge erred in finding and holding (J [286]) that the claims were clear.8.The primary judge erred in finding and holding (J [292]) that, when the claims are construed as including systems that do not involve two timers that each note the same initial reference time at the beginning of drilling operations and count from that time, the claims were fairly based.