Damorgold Pty Ltd v JAI Products Pty Ltd

Link copied
Case Copied 73 min read

FEDERAL COURT OF AUSTRALIA

Damorgold Pty Ltd v JAI Products Pty Ltd [2014] FCA 150

Citation: Damorgold Pty Ltd v JAI Products Pty Ltd [2014] FCA 150
Parties: DAMORGOLD PTY LTD (ACN 051 905 705) and VERTILUX CORPORATION PTY LTD (ACN 074 643 182) v JAI PRODUCTS PTY LTD (ACN 126 185 377); JAI PRODUCTS PTY LTD (ACN 126 185 377); DAMORGOLD PTY LTD (ACN 051 905 705) and VERTILUX CORPORATION PTY LTD (ACN 074 643 182)
File number: VID 1051 of 2010
Judge: MIDDLETON J
Date of judgment: 28 February 2014
Corrigendum: 11 March 2014
Catchwords: PATENTS – infringement – contributory infringement under s 117 of the Patents Act 1990 (Cth) – whether requirements of s 117(2) are met
PATENTS – infringement – joint tortfeasor at common law
PATENTS – infringement – authorisation – s 13 of the Patents Act 1990 (Cth)
PATENTS – validity – novelty – s 7 and Sch 1 of the Patents Act 1990 (Cth) – reverse infringement test – Hill v Evans
PATENTS – validity – manner of manufacture – s 18 of the Patents Act 1990 (Cth) – claimed invention a combination of integers — whether claims were mere collocation of integers
Legislation: Patents Act 1990 (Cth)
Patents Amendment Act 2001 (Cth)
Cases cited: Apotex Pty Ltd v Sanofi-Aventis Australia Pty Ltd (2013) 304 ALR 1; (2013) 103 IPR 217
Aspirating IP Limited v Vision Systems (2010) 88 IPR 52
Bristol-Myers Squibb Co v F H Faulding & Co Ltd (2000) 97 FCR 524
Britax Childcare Pty Ltd v Infa-Secure Pty Ltd (No 3) [2012] FCA 1019
Commissioner of Patents v Microcell Ltd (1959) 102 CLR 232
Commonwealth Industrial Gases Ltd v MWA Holdings Pty Ltd (1970) 180 CLR 160
Falcon v Famous Players Film Co [1926] 2 KB 474
Formento Industrial SA & Biro Swan Ltd v Mentmore Manufacturing Co Ltd [1956] RPC 87
Fresenius Medical Care Australia Pty Ltd v Gambro Pty Ltd (2005) 224 ALR 168; (2005) 67 IPR 230
Hill v Evans (1862) 4 De GF & J 288, 300-302; 45 ER 1195, 1199-1200
Insta Image Pty Ltd v K D Kanopy Australasia Pty Ltd (2008) 78 IPR 20
Jupiters Ltd v Neurizon Pty Ltd (2005) 222 ALR 155; 65 IPR 86
Lockwood Security Pty Ltd v Doric Products Pty Ltd (No 2) (2007) 235 CLR 173
Longworth v Emerton (1951) 83 CLR 539
Lux Traffic Controls Limited v Pike Signals Limited [1993] RPC 107
Merck & Co Inc v Arrow Pharmaceuticals Ltd (2006) 154 FCR 31; 68 IPR 511; [2006] FCAFC 91
Meyers Taylor Pty Ltd v Vicarr Industries Ltd (1977) 137 CLR 228
Nicaro Holdings Pty Ltd v Martin Engineering Co (1990) 91 ALR 513
NV Phillips Gloeilampenfabrieken v Mirabella International Pty Ltd (1995) 183 CLR 655
PLG Research Ltd v Ardon International Ltd [1993] FSR 197
Raleigh Cycle Coy Ltd v H Miller & Coy Ltd [1948] 1 AII ER 308
Ramset Fasterners (Aust) Pty Ltd v Advanced Building Systems…
CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Damorgold Pty Ltd v JAI Products Pty Ltd and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2014] FCA 150
Decision Date

CaseChat Overview and Summary

In the case of Damorgold Pty Ltd v JAI Products Pty Ltd, Damorgold, the owner of a patent for a blind control mechanism, alleged that JAI infringed that patent by selling spring assist mechanisms in Australia. The case was heard in the Federal Court of Australia, where the primary issue was whether JAI had infringed Damorgold’s patent rights by selling certain products. The court also considered whether the patent was valid, specifically its novelty and whether the claimed invention was merely a collocation of existing components.

The legal issues at hand included the interpretation of the patent claims, the validity of the patent, and whether JAI had infringed the patent through direct or contributory actions. The court had to determine if JAI’s products met the criteria for patent infringement under the Patents Act 1990 (Cth), including whether they performed substantially the same function in substantially the same way to achieve the same result as the patented invention. Additionally, the court needed to assess if JAI’s actions could be considered authorisation under s 13 of the Act.

The court found that certain claims of the patent were anticipated by the public disclosure of the RolaShades product, rendering them invalid. However, it concluded that other claims were not anticipated and were valid. JAI was found to have infringed specific claims of the patent through the sale of certain spring assist mechanisms. The court also noted that JAI’s actions did not constitute authorisation under the Act. Consequently, the court ordered that JAI had infringed the patent and directed the parties to confer and submit proposed minutes of orders reflecting the court’s findings.

Orders

Orders of the court

1. On or before 4:00pm on 14 March 2014, the parties confer and file and serve proposed minutes of orders reflecting these reasons and including any further directions (if necessary), and in the event of disagreement, short written submissions in support of any separately proposed minutes of orders.

Note: Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.

Background

Background to the litigation

JAI led evidence from five witnesses:(a)Philip Horner, who has been a director of JAI since July 2007 and deposed to events he said took place in 1994 and 1996 in relation to a ‘spring assist’ referred to in the evidence as the RolaShades product.(b)Bruce Field, who is a consulting engineer and until December 2010 was an associate professor at Monash University specialising in teaching and research in design graphics, and industrial innovation. Dr Field’s evidence essentially addressed JAI’s allegations of invalidity including the RolaShades product and the Toso Patent (to which I will later refer).(c)Sandra Payne, who was formerly the office manager at JAI’s predecessor, JAI Pty Ltd and deposed to events she says took place in 1994 and 1996 in relation to the RolaShades product.(d)Gin Wah Ang, who was involved in the Gin + Design Workshop in Singapore and gave evidence about the use of a RolaShades product in Singapore, and the receipt of a version of the RolaShades Drawing (to which I will later refer). Mr Ang knew nothing about the inner workings of the RolaShades product.(e)Dennis Jackson, who was formerly the managing director of Faber Bentin Australia from 2005, having joined that firm as General Manager in 2004. Prior to that he was based in the UK. Mr Jackson gave evidence about what devices he says were in use outside Australia before the priority date. Mr Jackson gave evidence that mechanisms combining a spring assist with a clutch mechanism were in use by a number of European and American companies from at least 1996. Mr Jackson also gave evidence that in 2005, RolaShades Pte Ltd (a Singaporean company) (‘RolaShades’) supplied him with copies of two invoices of sales by that company of its RolaShades EzRoll. The invoices themselves have not been produced, and the RolaShades EzRoll was not able to be described. BACKGROUND In closing written submissions, Damorgold set out the background and details of the Patent, all of which were not in contention. It is convenient to refer to these matters by way of summary. The Patent is entitled ‘A blind control mechanism’. The inventor was Vito Fortunato. The complete application for the Patent was filed on 25 August 2000, claiming priority from provisional application No. PQ2410 made on 25 August 1999. The Patent was published and became open to public inspection on 22 March 2001, and was sealed on 28 August 2003. The first applicant appointed the second applicant as the licensee of the Patent with effect from 1 January 2006. In or about July 2007, JAI took over the business of wholesaling window furnishing components previously carried on by JAI Pty Ltd. JAI supplies its products to blind makers and wholesalers. JAI’s product range includes components for roller blinds, motorised roller blinds, and motorised curtain tracks. Since July 2007, the components in its roller blinds range which JAI offered for sale, sold and supplied in Australia included roller blind spring assist mechanisms or “spring assists” with model numbers SA38R, SA38L, SA45R, SA45L, SA5518R, SA5518L, SA5520R and SA5520L (‘JAI spring assists’).

Evidence

Evidence Before The Court

Full text does not contain this section.

Decision

Reasons for decision

Mr Hunter’s broad construction of what is claimed by the omnibus claim as a mechanism “which is in substance the same as the mechanism described and or drawn in the patent specification” is not a construction that can be sustained by reference to the words and content of claim 30. CONCLUSION The conclusion I have reached is that:(a)Relevantly, claims 1-17, 19-22, 24-26, 29 and 30 were anticipated by the conduct of making publicly available in Australia the RolaShades product and the information so disclosed thereby;(b)None of the claims the subject of the Patent was anticipated by the Toso Patent;(c)The Patent does disclose a manner of manufacture; and(d)JAI has infringed claims 23 and 27. I will order that on or before 4:00pm on 14 March 2014, the parties confer and file and serve proposed minutes of orders reflecting these reasons and including any further directions (if necessary), and in the event of disagreement, short written submissions in support of any separately proposed minutes of orders.

Ratio Decidendi

Legal Principle Established

Full text does not contain this section.