Thomas v Trades and Labour Hire Pty Ltd (in liq)

Link copied
Case Copied 74 min read

SUPREME COURT OF QUEENSLAND

CITATION:

Thomas v Trades & Labour Hire Pty Ltd (in liq) & Anor [2016] QCA 332

PARTIES:

GRANT RUSSELL THOMAS
(appellant)
v
TRADES & LABOUR HIRE PTY LTD (IN LIQ)
ACN 084 671 429
(first respondent)
GOLD COAST CITY COUNCIL
(second respondent)

FILE NO/S:

Appeal No 10006 of 2015
SC No 9892 of 2012

DIVISION:

Court of Appeal

PROCEEDING:

General Civil Appeal

ORIGINATING COURT:


Supreme Court at Brisbane – [2015] QSC 264

DELIVERED ON:

9 December 2016

DELIVERED AT:

Brisbane

HEARING DATE:

28 April 2016

JUDGES:

Morrison and Philippides JJA and Flanagan J
Separate reasons for judgment of each member of the Court, Philippides JA and Flanagan J concurring as to the orders made, Morrison JA dissenting

ORDER:

The appeal is dismissed.

CATCHWORDS:

TORTS – NEGLIGENCE – ESSENTIALS OF ACTION FOR NEGLIGENCE – DUTY OF CARE – REASONABLE FORESEEABILITY OF DAMAGE – where the appellant was a truck driver employed by the first respondent – where the appellant’s services were contracted to the second respondent – where the appellant sustained serious injuries during the course of his work as the driver and operator of a tip truck when the tailgate of his tip truck fell and landed on his foot – where the appellant submitted that the trial judge erred in finding it was not reasonably foreseeable that a driver may be at risk of injury as a consequence of damage caused to a tailgate hinge through use of incorrect tipping procedures – whether the respondents owed the appellant a duty of care to avoid risk of injury when discharging  loads from his tip truck during the course of his employment

TORTS – NEGLIGENCE – ESSENTIALS OF ACTION FOR NEGLIGENCE – STANDARD OF CARE – PARTICULAR PERSONS AND SITUATIONS – OTHER CASES – where the appellant was a truck driver employed by the first respondent – where the appellant’s services were contracted to the second respondent – where the appellant sustained serious injuries during the course of his work as the driver and operator of a tip truck when the tailgate of his tip truck fell and landed on his foot – where the appellant submitted that if a risk assessment of the tipping operations had been taken it would have indicated that it was necessary to devise and implement a procedure to instruct truck drivers as to the type of load that could be discharged under the tailgate of the truck swinging on its horizontal axis – where the appellant contended that drivers should have been instructed that items larger than 300 mm in diameter should not be tipped under the tailgate – where there was no submission that the respondents’ instructions for taking steps once there had been damage to the tailgate were inadequate – whether the respondents breached their duty of care in failing to devise, implement, maintain and enforce a system where drivers were specifically instructed to tip under the tailgate if the material in the tray was solid and less than…

CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Thomas v Trades and Labour Hire Pty Ltd (in liq) and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2016] QCA 332
Decision Date

CaseChat Overview and Summary

Thomas, a truck driver employed by the first respondent and contracted to the second respondent, sustained serious injuries while operating a tip truck when the tailgate fell and landed on his foot. He argued that the trial judge erred in finding it was not reasonably foreseeable that a driver could be injured as a result of damage to a tailgate hinge through incorrect tipping procedures. The respondents were found to have owed the appellant a duty of care to avoid the risk of injury when discharging loads from his tip truck during employment. The appeal centred on whether the respondents breached their duty of care by not devising, implementing, maintaining, and enforcing a system where drivers were specifically instructed to tip under the tailgate if the material in the tray was solid and less than 300 mm in diameter. The court found that Thomas had a serious and substantial error in assessing the size of the load, choosing an improper tipping method for a load containing material in excess of 400 mm. The trial judge found that the injury was caused by Thomas pushing the damaged tailgate, which resulted in it falling.

The court concluded that even if the respondents had implemented the instruction proposed by Thomas, it would not have influenced his selection of tipping procedure, as he was already aware that the load depicted in the photograph should not have been tipped under the tailgate. The court found that the injury was caused by Thomas pushing the damaged tailgate, which resulted in it falling. The appeal was dismissed, and the trial judge's findings on duty of care, breach, and causation were upheld.

Orders

Orders of the court

The appeal is dismissed.

Background

Background to the litigation

Evidence

Evidence Before The Court

The trial judge found that the appellant knew that, for the size of concrete blocks depicted in the photograph taken by Mr Howard, the tailgate should have been swung around to the outside of the passenger’s side of the tray and not tipped under the tailgate operating on its horizontal axis. This was also the view of Mr Hinde and Mr Dalton, each of whom was shown the same photograph,[87] and was implicit in the appellant’s statement to Ms Cox (a Workplace Health and Safety Inspector):[88]“The task of unloading of items was the normal process involved with tipping loads. However, at the time of the incident the load contained small pieces of concrete. Therefore it did not require me to swing the tailgate. Normally if it had of been larger pieces of concrete it would require me to manually swing the tailgate. By this I mean would unlatch the right side of the tailgate and swing it over to the left side to latch back to the truck.”[87][2015] QSC 264 at [79].[88][2015] QSC 264 at [79].The evidence concerning the system for discharging loads and for what to do in the event of damage The trial judge summarised the evidence as to an appropriate instruction that could have been given to a driver such as the appellant regarding when to discharge a load under the tailgate swinging on its horizontal axis and when to swing the tailgate out of the way as follows:[89]“… Mr Kahler expressed the opinion that the tailgate should be swung in any case were [sic] the load consisted of solid material over 200 to 300 mm in size, but Dr Grigg thought that 300 millimetres would be ‘getting beyond the limit’. An engineer employed by the Council, Mr Gutteridge, would have taken a different approach. In a record of interview which was tendered, Mr Gutteridge expressed the opinion that a load which was capable of fluid movement (such as sand) could be discharged under the tailgate but, if the load contained any solid material, the tailgate should be swung. A risk assessment carried out by the Council after the accident resulted in the promulgation of written procedures to include a focus on these very issues, although it was perhaps not formulated as well as it could have been. This risk assessment was carried out on 6 August 2010, and the resulting revised procedures were promulgated on 11 August 2010. Subsequently, the Council carried out a more comprehensive risk assessment in December 2010, which resulted in a range of new administrative controls. Lastly, in the Amended Statement of Claim, it is pleaded that drivers ought to be instructed that ‘the tailgate should be swung about a vertical axis when the material size is greater than 300 millimetres for solid material rather than swung on a horizontal axis’.”[89][2015] QSC 264 at [80]. As to that issue, his Honour concluded:[90]“Such evidence, and contentions, rather missed the point. Not only were those formulations informed by the circumstances of the subject accident, whichever one might have been adopted and then expressed in training and instructions to truck drivers prior to the accident, it could not have added to [the appellant’s] store of knowledge at the time of the accident, that is to say, that the load pictured in Mr Howard’s photograph should only have been discharged after the tailgate was swung completely out of the way.”[90][2015] QSC 264 at [81] (appellant’s emphasis).

Decision

Reasons for decision

Ratio Decidendi

Legal Principle Established