GME Pty Ltd v Uniden Australia Pty Ltd

Link copied
Case Copied 46 min read

FEDERAL COURT OF AUSTRALIA

GME Pty Ltd v Uniden Australia Pty Ltd [2022] FCA 520

File numbers: NSD 169 of 2022
Judgment of: BURLEY J
Date of judgment: 9 May 2022
Catchwords: INTELLECTUAL PROPERTY – registered designs – threatened infringement of applicant’s registered design for a microphone – consideration of factors relevant – consideration of the prior art base – whether respondent’s product is substantially similar in overall impression to the registered design – infringement established
Legislation:

Designs Act 1906 (Cth)

Designs Act 2003 (Cth) ss 5, 7, 10, 15, 16, 19, 71

Cases cited:

Dart Industries Inc v Décor Group Pty Ltd [1989] FCA 49; 15 IPR 403

Household Articles Ltd’s Registered Design [1998] FSR 676

Hunter Pacific International Pty Ltd v Martec Pty Ltd [2016] FCA 796; 121 IPR 1

Keller v LED Technologies Pty Ltd [2010] FCAFC 55; 185 FCR 449

LED Technologies Pty Ltd v Elecspess Pty Ltd [2008] FCA 1941; 80 IPR 85

Multisteps Pty Ltd v Source and Sell Pty Ltd [2013] FCA 743, 214 FCR 323

Review 2 Pty Ltd v Redberry Enterprise Pty Ltd [2008] FCA 1588; 173 FCR 450

Division: General Division
Registry: New South Wales
National Practice Area: Intellectual Property
Sub-area: Copyright and Industrial Designs
Number of paragraphs: 87
Date of hearing: 19 April 2022
Counsel for the Applicant: Mr A Lang SC with Mr R Clark
Solicitor for the Applicant: Clayton Utz
Counsel for the Respondent: Mr J Hennessy SC with Ms F St John
Solicitor for the Respondent: Bird & Bird

ORDERS

NSD 169 of 2022
BETWEEN:

GME PTY LTD

Applicant

AND:

UNIDEN AUSTRALIA PTY LTD

Respondent

ORDER MADE BY:

BURLEY J

DATE OF ORDER:

9 MAY 2022

THE COURT ORDERS THAT:

1.Within 7 days the parties confer and provide short minutes of orders to the chambers of Justice Burley giving effect to these reasons and addressing the question of costs and further conduct of the proceedings.

2.The matter be listed for a case management hearing at 9.30am on 18 May 2022.

Note:   Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.


REASONS FOR JUDGMENT

1       INTRODUCTION

[1]

1.1      The registered design

[4]

1.2      The alleged infringement: XTRAK

[6]

1.3      The prior art

[7]

1.4      The expert evidence

[9]

2       RELEVANT LAW

[16]

3       THE COMPARISON

[38]

3.1      Introduction

[38]

3.2      The GME design

[39]

3.3      The prior art devices

[43]

3.3.1        Motorola device

[44]

3.3.2        Standard Horizon device

[45]

3.3.3        The Simoco device

[46]

3.3.4        TX3350 device

[47]

3.3.5        GX750 device

[48]

3.3.6        HM195GB device

[49]

3.3.7        Crystal device

[50]

3.3.8        TX4500S device

[51]

3.3.9        IC450 device

[52]

3.4      The GME design and the prior art base

[53]

3.5      Relevant functional aspects of microphones and freedom to innovate

[57]

3.6      Comparison of the GME design and the XTRAK product

[63]

3.6.1        The submissions

[63]

3.6.2        Comparison between the devices

[65]

3.6.3        Consideration

[76]

4       DISPOSITION

[87]

APPENDIX 1 – REGISTERED DESIGN

APPENDIX 2 –…

CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read GME Pty Ltd v Uniden Australia Pty Ltd and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2022] FCA 520
Decision Date

CaseChat Overview and Summary

GME Pty Ltd sought to establish that Uniden Australia Pty Ltd had threatened to infringe GME's registered design for a microphone. The dispute was heard in the Federal Court of Australia. The central issue before the court was whether Uniden's product was substantially similar in overall impression to GME's registered design. The court needed to determine if the Uniden product shared the same distinctive features that defined GME's design.

The court examined the evidence provided by both parties, particularly focusing on the expert opinions of Graeme MacDonald for GME and Andrew Simpson for Uniden. MacDonald highlighted the specific design elements that GME's design protected, including the ergonomic requirements and user interface of handheld microphones. Simpson, although lacking direct experience in designing handheld radios, provided insights based on his extensive background in industrial design and practical use of similar products. The court considered the prior art base, including the products and designs referenced by both parties, to assess the distinctiveness of GME's design and the similarity between GME's design and Uniden's product.

The court found that Uniden's product was indeed substantially similar in overall impression to GME's registered design. The distinctive features of GME's design were replicated in Uniden's product, leading the court to conclude that there was a threat of infringement. The court's decision was based on the evidence and expert opinions that showed the overall impression created by Uniden's product was too close to GME's design, despite some minor differences.

The final orders required the parties to confer and provide minutes of orders regarding costs and the conduct of the proceedings. The matter was also to be listed for a case management hearing to further address these issues.

Orders

Orders of the court

1. Within 7 days the parties confer and provide short minutes of orders to the chambers of Justice Burley giving effect to these reasons and addressing the question of costs and further conduct of the proceedings.

2. The matter be listed for a case management hearing at 9.30am on 18 May 2022.

Note: Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.

Background

Background to the litigation

Full text does not contain this section.

Evidence

Evidence Before The Court

GME also referred to one Uniden product, depicted in Appendix 4, which was relied upon solely for the purpose of freedom to design.1.4 The expert evidence GME relies on the evidence of Graeme MacDonald, who has worked as a designer since 1981, and has since 2000 been a director of Cube Design Pty Ltd, an industrial design company providing industrial design and product engineering services to clients. He first designed a radio frequency product in 1990 and has since then been engaged in a number of projects involving the industrial and mechanical design of handheld radios, including specific projects in 1998, 2004, 2006, 2008 and 2018. This work involved the disassembly of competitor products in order to study the construction and styling of the product. For his first affidavit, Mr MacDonald was provided with some of the prior art by the solicitors acting for GME. He gave evidence about the basic ergonomic requirements that the designer has to consider when designing handheld microphones, noting that they must be able to be held in the hand, that the user interface should be simple enough not to require the reading of detailed manual instructions for basic functions. He explains that the press to talk (PTT) button should usually be in the same place, on the side of the device on the left, although the shape of the button can be different. He gives evidence that otherwise there is generally freedom with the remainder of the design of the product, and that it is “quite easy” to make a product look different to that of a competitor. Mr MacDonald gives his views of the GME design, the XTRAK product and the prior art. In his second affidavit Mr MacDonald reviews additional pieces of prior art that were provided to Mr Simpson, and responds to Mr Simpson’s first affidavit. Uniden relies on the evidence of Andrew Simpson, who has been an industrial designer since 2004 and a principal of Vert Design Pty Ltd since 2005. He gives evidence that he has worked with clients from a broad range of industries and has been engaged in the design of outdoor furniture, vertical gardens, lighting and electric vehicle charging stations. He has also been involved in design projects involving consumer electronics including wearable fitness technology devices, a laptop, virtual reality headsets and bushfire-detection devices. Between 2014 and 2016 he was a guest lecturer in industrial design practice at the University of Technology of Sydney and between 2018 and 2020 he was a tutor in a final-year design studio subject for students studying a Bachelor of Industrial Design at University of New South Wales. Unlike Mr MacDonald, he has not been involved in the design of a handheld radio. In his oral evidence, Mr Simpson explained that whilst he had had no professional experience designing handheld microphones, he had for many years been an offshore yachtsman who has used them, including some within the prior art in the present proceedings. He has also provided design advice to the bushfire and police services, which required some involvement in microphone usage over their citizen band radio systems.

Decision

Reasons for decision

Full text does not contain this section.

Ratio Decidendi

Legal Principle Established

Full text does not contain this section.