Comptroller-General of Customs v Sulo MGB Australia Pty Ltd

Link copied
Case Copied 45 min read

FEDERAL COURT OF AUSTRALIA

Comptroller-General of Customs v Sulo MGB Australia Pty Ltd [2017] FCA 315

File number: VID 241 of 2016
Judge: MOSHINSKY J
Date of judgment: 27 March 2017
Catchwords: TAXATION – customs and excise – tariff classification – plastic wheels for mobile garbage bins (commonly known as wheelie bins) – whether Tribunal erred in classifying wheels as parts of “other vehicles, not mechanically propelled” – whether Tribunal erred by not considering other possible classifications of wheelie bins – whether Tribunal erred in construction of “other vehicles, not mechanically propelled”
Legislation:

Administrative Appeals Tribunal Act 1975 (Cth), s 44

Customs Tariff Act 1995 (Cth), ss 3, 7, Sch 2, Sch 3

Cases cited:

Anite Networks Pty Ltd v Collector of Customs [1999] FCA 26

Barry R Liggins Pty Ltd v Comptroller-General of Customs (1991) 32 FCR 112

Chief Executive Officer of Customs v Biocontrol Ltd (2006) 150 FCR 64

Harris v Repatriation Commission (2000) 62 ALD 161

Hill v Repatriation Commission (2005) 218 ALR 251

Liebert Corporation Australia Pty Ltd v Collector of Customs (1993) 23 AAR 287

May v Military Rehabilitation and Compensation Commission (2015) 233 FCR 397

McAuliffe v Secretary, Department of Social Security (1992) 28 ALD 609

Minister for Immigration and Ethnic Affairs v Wu Shan Liang (1996) 185 CLR 259

Morales v Minister for Immigration and Ethnic Affairs (1995) 60 FCR 550

Norrie v Registrar of Births, Deaths and Marriages(NSW) (2013) 84 NSWLR 697

Primaplas Pty Ltd v Chief Executive Officer of Customs (2016) 242 FCR 268

Sulo MGB Australia Pty Ltd v Chief Executive Officer of Customs [2016] AATA 78

Times Consultants Pty Ltd v Collector of Customs (Qld) (1987) 16 FCR 449

Toyota Tsusho Australia Pty Ltd v Collector of Customs [1992] FCA 282

Vernon-Carus Australia Pty Ltd v Collector of Customs (1995) 21 AAR 450

Date of hearing: 30 November 2016
Date of last submissions: 14 December 2016
Registry: Victoria
Division: General Division
National Practice Area: Administrative and Constitutional Law and Human Rights
Category: Catchwords
Number of paragraphs: 77
Counsel for the Applicant: Ms Z Maud
Solicitor for the Applicant: Australian Government Solicitor
Solicitor for the Respondent: Mr L Gross, Gross & Becroft Lawyers

ORDERS

VID 241 of 2016
BETWEEN:

COMPTROLLER-GENERAL OF CUSTOMS

Applicant

AND:

SULO MGB AUSTRALIA PTY LTD (ACN 002 605 192)

Respondent

JUDGE:

MOSHINSKY J

DATE OF ORDER:

27 MARCH 2017

THE COURT ORDERS THAT:

1.The appeal be allowed.

2.The decision of the Administrative Appeals Tribunal made on 17 February 2016 at Melbourne be set aside.

3.The matter be remitted to the Administrative Appeals Tribunal for redetermination according to law.

4.By 4.00 pm on 31 March 2017, each party file and serve a submission (of no more than two pages) on costs.

Note:    Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.


REASONS FOR JUDGMENT

MOSHINSKY J:

Introduction

  1. The respondent (Sulo) manufactures mobile garbage bins commonly known as ‘wheelie bins’.  Sulo imports plastic wheels fitted with a solid…

CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Comptroller-General of Customs v Sulo MGB Australia Pty Ltd and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2017] FCA 315
Decision Date

CaseChat Overview and Summary

In the matter of Comptroller-General of Customs v Sulo MGB Australia Pty Ltd, the Federal Court was asked to determine whether the Administrative Appeals Tribunal (Tribunal) correctly classified plastic wheels for mobile garbage bins, commonly known as wheelie bins, under the relevant tariff headings. The case centred around whether the Tribunal erred in classifying the wheels under the subheading for "other vehicles, not mechanically propelled," and whether it failed to consider other possible classifications.

The legal issues before the court were whether the Tribunal had correctly identified the goods in their imported condition and applied the appropriate rules of interpretation in the Tariff Act. The court had to determine if the Tribunal's classification of the wheels under subheading 8716.90.00, as opposed to subheading 4012.90.00, was in accordance with the law. This involved examining the design features and intended use of the wheels, as well as considering the relevant provisions of the Interpretation Rules.

The Tribunal had concluded that the wheels were specifically designed to fit onto mobile garbage bins and were not suited for any other purpose. The court agreed with the Tribunal's identification of the wheels as plastic wheels for mobile garbage bins and found that the Tribunal had not erred in classifying them under subheading 8716.90.00. However, the court held that the Tribunal had not adequately considered whether other classifications under the Tariff Act could apply. The court found that the Tribunal's error in this regard warranted the setting aside of its decision and the matter being remitted to the Tribunal for redetermination.

The court allowed the appeal, set aside the Tribunal's decision, and remitted the matter back to the Tribunal for redetermination according to law. Each party was directed to file and serve a submission on costs by a specified date.

Orders

Orders of the court

1. The appeal be allowed.

2. The decision of the Administrative Appeals Tribunal made on 17 February 2016 at Melbourne be set aside.

3. The matter be remitted to the Administrative Appeals Tribunal for redetermination according to law.

4. By 4.00 pm on 31 March 2017, each party file and serve a submission (of no more than two pages) on costs.

Note: Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.

Background

Background to the litigation

References in these reasons to Sections, Chapters, headings and subheadings are to Sections, Chapters, headings and subheadings in Sch 3 to the Tariff Act. In these reasons, I will use the expressions “mobile garbage bin” and “wheelie bin” interchangeably.Procedural background On 22 November 2014, an officer of the Australian Customs and Border Protection Service made an initial decision in relation to the mobile garbage bin wheels (Model M-2) imported by Sulo. This decision classified the wheels to subheading 4012.90.00 (solid or cushion tyres of rubber – other), using rule 3(c) of the Interpretation Rules set out in Sch 2 to the Tariff Act (the Interpretation Rules). (Extracts from the Interpretation Rules are set out below.) On 28 January 2015, an officer of the Australian Customs and Border Protection Service, on an internal review of the initial decision, decided that the mobile garbage bin wheels were properly classified to subheading 4012.90.00 and therefore were not eligible for the TCO (the Internal Review Decision). The decision-maker applied rules 3(c) and 6 of the Interpretation Rules to arrive at this decision. Sulo applied to the Tribunal for review of the Internal Review Decision. On 17 February 2016, the Tribunal decided to set aside the Internal Review Decision and, in substitution therefor, determined that the wheels were to be classified to subheading 8716.90.00 and (as a consequence) were eligible for the TCO: Sulo MGB Australia Pty Ltd v Chief Executive Officer of Customs [2016] AATA 78 (the Reasons). The Comptroller ‘appeals’ to this Court on a question of law pursuant to s 44 of the Administrative Appeals Tribunal Act 1975 (Cth) (the AAT Act). The amended notice of appeal raises two questions of law which are set out below.The decision of the Tribunal The Tribunal noted at [3] of the Reasons that the Comptroller conceded that Sulo imported the wheels for use with its mobile garbage bins and that the wheels were parts for those bins. The Tribunal also noted, at [4], that the Comptroller accepted that, if the goods were properly classified to subheading 8716.90.00, then the goods came within the terms of the TCO. The Tribunal stated, at [7], that the starting point in resolving questions of tariff classification was to identify the goods in their condition as imported. The Tribunal referred (at [8]-[10]) to Anite Networks Pty Ltd v Collector of Customs [1999] FCA 26 at [26] per Einfeld, Carr and Lehane JJ; Vernon-Carus Australia Pty Ltd v Collector of Customs (1995) 21 AAR 450 at 454-456 per Northrop J; and Times Consultants Pty Ltd v Collector of Customs (Qld) (1987) 16 FCR 449 at 463 per Morling and Wilcox JJ. The Tribunal considered the identification of the goods in some detail at [11]-[16]. After noting the Comptroller’s concessions (see [13] above) and the statement in the Comptroller’s statement of facts and contentions that the subject goods as imported were plastic wheels fitted with a solid rubber tyre having a diameter of 200mm, the Tribunal made the following observations about the wheels:12.I had in evidence an example of an item the subject of this case. While I agree with the description and identification offered by Mr Millea [the solicitor for the Comptroller], I wish to add two further observations. As was stated in Tridon, in identifying the goods in question, I may have regard to their design features and their suitability for a particular use where that appears from inspection. The wheel itself has, as an integral component, a hollow stub axle housing into which the axle is inserted. In addition, that stub axle housing has, at its far end, a steel spring-loaded pin. I have no doubt that an informed observer would conclude that the steel spring-loaded pin is designed to fit into a particular axle which has a groove cut into it to accommodate the pin. That would prevent the wheel from working its way off the axle as the wheel is rotated. In other words, the wheel, tyre and axle housing have been specifically designed to fit onto a purpose-built axle, and not designed for any other use.13.In addition, I had in evidence the assembly instruction for Sulo’s plastic mobile garbage bins. It depicts the wheel with its spring-loaded locking pin being pushed onto a steel axle at the base of the bin so that the locking pin retracts as the wheel is pushed on and then returns to its original position as it slips into the groove in the axle. The outer end of the axle on the base of the Sulo bins is machined to a conical taper so as to allow the wheel to lock into place when pushed onto the axle in the course of assembly.14.Given the fixed size of the stub axle housing and its locating steel spring-loaded pin, there can be little room for doubt that the item in question was made specifically for the purpose of being fitted to a mobile garbage bin manufactured by Sulo. There was no evidence that it could have any other use in the condition it was imported. While I have indicated that the item itself is comprised of two essential components, the solid rubber tyre moulded onto a plastic rim from which is extruded a hollow stub axle housing, I find that the correct identification of the item is that it is a plastic wheel.

Evidence

Evidence Before The Court

Full text does not contain this section.

Decision

Reasons for decision

On 28 January 2015, an officer of the Australian Customs and Border Protection Service, on an internal review of the initial decision, decided that the mobile garbage bin wheels were properly classified to subheading 4012.90.00 and therefore were not eligible for the TCO (the Internal Review Decision). The decision-maker applied rules 3(c) and 6 of the Interpretation Rules to arrive at this decision. Sulo applied to the Tribunal for review of the Internal Review Decision. On 17 February 2016, the Tribunal decided to set aside the Internal Review Decision and, in substitution therefor, determined that the wheels were to be classified to subheading 8716.90.00 and (as a consequence) were eligible for the TCO: Sulo MGB Australia Pty Ltd v Chief Executive Officer of Customs [2016] AATA 78 (the Reasons). The Comptroller ‘appeals’ to this Court on a question of law pursuant to s 44 of the Administrative Appeals Tribunal Act 1975 (Cth) (the AAT Act). The amended notice of appeal raises two questions of law which are set out below.The decision of the Tribunal The Tribunal noted at [3] of the Reasons that the Comptroller conceded that Sulo imported the wheels for use with its mobile garbage bins and that the wheels were parts for those bins. The Tribunal also noted, at [4], that the Comptroller accepted that, if the goods were properly classified to subheading 8716.90.00, then the goods came within the terms of the TCO. The Tribunal stated, at [7], that the starting point in resolving questions of tariff classification was to identify the goods in their condition as imported. The Tribunal referred (at [8]-[10]) to Anite Networks Pty Ltd v Collector of Customs [1999] FCA 26 at [26] per Einfeld, Carr and Lehane JJ; Vernon-Carus Australia Pty Ltd v Collector of Customs (1995) 21 AAR 450 at 454-456 per Northrop J; and Times Consultants Pty Ltd v Collector of Customs (Qld) (1987) 16 FCR 449 at 463 per Morling and Wilcox JJ. The Tribunal considered the identification of the goods in some detail at [11]-[16]. After noting the Comptroller’s concessions (see [13] above) and the statement in the Comptroller’s statement of facts and contentions that the subject goods as imported were plastic wheels fitted with a solid rubber tyre having a diameter of 200mm, the Tribunal made the following observations about the wheels:12.I had in evidence an example of an item the subject of this case. While I agree with the description and identification offered by Mr Millea [the solicitor for the Comptroller], I wish to add two further observations. As was stated in Tridon, in identifying the goods in question, I may have regard to their design features and their suitability for a particular use where that appears from inspection. The wheel itself has, as an integral component, a hollow stub axle housing into which the axle is inserted. In addition, that stub axle housing has, at its far end, a steel spring-loaded pin. I have no doubt that an informed observer would conclude that the steel spring-loaded pin is designed to fit into a particular axle which has a groove cut into it to accommodate the pin. That would prevent the wheel from working its way off the axle as the wheel is rotated. In other words, the wheel, tyre and axle housing have been specifically designed to fit onto a purpose-built axle, and not designed for any other use.13.In addition, I had in evidence the assembly instruction for Sulo’s plastic mobile garbage bins. It depicts the wheel with its spring-loaded locking pin being pushed onto a steel axle at the base of the bin so that the locking pin retracts as the wheel is pushed on and then returns to its original position as it slips into the groove in the axle. The outer end of the axle on the base of the Sulo bins is machined to a conical taper so as to allow the wheel to lock into place when pushed onto the axle in the course of assembly.14.Given the fixed size of the stub axle housing and its locating steel spring-loaded pin, there can be little room for doubt that the item in question was made specifically for the purpose of being fitted to a mobile garbage bin manufactured by Sulo. There was no evidence that it could have any other use in the condition it was imported. While I have indicated that the item itself is comprised of two essential components, the solid rubber tyre moulded onto a plastic rim from which is extruded a hollow stub axle housing, I find that the correct identification of the item is that it is a plastic wheel.

Ratio Decidendi

Legal Principle Established

Full text does not contain this section.