BlueScope Steel Limited v Gram Engineering Pty Ltd

Link copied
Case Copied 60 min read

FEDERAL COURT OF AUSTRALIA

BlueScope Steel Limited v Gram Engineering Pty Ltd [2014] FCAFC 107

Citation: BlueScope Steel Limited v Gram Engineering Pty Ltd [2014] FCAFC 107
Appeal from: Gram Engineering Pty Ltd v Bluescope Steel Ltd [2013] FCA 508
Parties: BLUESCOPE STEEL LIMITED (ACN 000 011 058) v GRAM ENGINEERING PTY LTD (ACN 002 193 311); GRAM ENGINEERING PTY LTD (ACN 002 193 311) v BLUESCOPE STEEL LIMITED (ACN 000 011 058)
File number: NSD 1141 of 2013
Judges: BESANKO, MIDDLETON AND YATES JJ
Date of judgment: 26 August 2014
Catchwords:

DESIGNS – scope of the monopoly – construction of the design – whether design is new or original

DESIGNS – infringement – whether fraudulent or obvious imitation – principles of fraudulent imitation – whether evidence of deliberate copying required

Legislation: Designs Act 1906 (Cth)
Designs Act 2003 (Cth)
Cases cited: Dart Industries Inc v Décor Corporation Pty Ltd (1989) 15 IPR 403
Dart Industries v Decor Corporation (1989) 15 IPR 403
Dunlop Rubber Co Ltd v Golf Ball Developments Ltd (1931) 48 RPC 268
Firmagroup Australia Pty Ltd v Byrne & Davidson Doors (Vic) Pty Ltd (1986) 11 FCR 415
Gram Engineering Pty Ltd v Bluescope Steel Limited [2013] FCA 508
Mining Equipment Pty Ltd v Mining Supplies Australia Pty Ltd (2001) 52 IPR 513
Moody v Tree (1892) 9 RPC 333
Optical 88 Ltd v Optical 88 Pty Ltd (2011) 197 FCR 67
Polyaire Pty Ltd v K-Aire Pty Ltd (2005) 221 CLR 287
Ullrich Aluminium Pty Ltd v Dias Aluminium Products Pty Ltd (2006) 153 FCR 437
Dates of hearing: 28 and 29 November 2013
Place: Sydney
Division: GENERAL DIVISION
Category: Catchwords
Number of paragraphs: 204
Counsel for the Appellant: Mr R Cobden SC with Mr J Cooke
Solicitor for the Appellant: Ashurst Australia
Counsel for the Respondent: Mr D Catterns QC with Mr C Burgess and Ms P Blackadder
Solicitor for the Respondent: Horowitz & Bilinsky

IN THE FEDERAL COURT OF AUSTRALIA

NEW SOUTH WALES DISTRICT REGISTRY

GENERAL DIVISION

NSD 1141 of 2013

ON APPEAL FROM THE FEDERAL COURT OF AUSTRALIA
BETWEEN:

BLUESCOPE STEEL LIMITED (ACN 000 011 058)
Appellant

GRAM ENGINEERING PTY LTD (ACN 002 193 311)
Cross-Appellant

AND:

GRAM ENGINEERING PTY LTD (ACN 002 193 311)
Respondent

BLUESCOPE STEEL LIMITED (ACN 000 011 058)
Cross-Respondent

JUDGES:

BESANKO, MIDDLETON AND YATES JJ

DATE OF ORDER:

26 August 2014

WHERE MADE:

SYDNEY

THE COURT ORDERS THAT:

1.The parties file within 14 days short minutes of orders disposing of the appeal and cross-appeal, and dealing with the costs of the appeal, or in the absence of agreement, short submissions. 

Note:Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.


IN THE FEDERAL COURT OF AUSTRALIA

NEW SOUTH WALES DISTRICT REGISTRY

GENERAL DIVISION

NSD 1141 of 2013

ON APPEAL FROM THE FEDERAL COURT OF AUSTRALIA
BETWEEN:

BLUESCOPE STEEL LIMITED (ACN 000 011 058)
Appellant

GRAM ENGINEERING PTY LTD (ACN 002 193 311)
Cross-Appellant

AND:

GRAM ENGINEERING PTY LTD (ACN 002 193…

CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read BlueScope Steel Limited v Gram Engineering Pty Ltd and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2014] FCAFC 107
Decision Date

CaseChat Overview and Summary

BlueScope Steel Limited contested the validity and infringement of a registered design held by Gram Engineering Pty Ltd, before the Federal Court of Australia. The dispute centred on the interpretation and application of the Design Act, particularly regarding the novelty, originality, and infringement of the registered design. The crux of the case was whether Gram Engineering’s design was indeed new or original and whether BlueScope’s product constituted a fraudulent or obvious imitation of that design.

The court had to address several legal issues, including the proper construction of the design, the criteria for determining novelty and originality, and the principles for establishing infringement. The construction of the design required an 'instructed eye' approach, considering both visual and functional aspects. The court also had to determine whether BlueScope’s product was a substantial imitation of Gram Engineering’s design, considering whether the infringing design was an obvious or fraudulent imitation. The court had to assess if evidence of deliberate copying was necessary to establish infringement.

The court found that the primary judge had correctly interpreted the design and applied the principles of novelty and originality as required by the Act. The design in question was found to be novel and original, fulfilling the statutory requirements. The primary judge’s interpretation of the design was supported by expert evidence and aligned with the 'instructed eye' approach. The court rejected BlueScope’s argument that the design could be applied to fencing panels used horizontally, affirming that the design’s context and intended use were integral to its interpretation. Consequently, the court held that BlueScope’s product was an infringement of Gram Engineering’s design.

The final orders required the parties to file minutes of orders and deal with the costs of the appeal within 14 days, or provide short submissions if they could not agree.

Orders

Orders of the court

1. The parties file within 14 days short minutes of orders disposing of the appeal and cross-appeal, and dealing with the costs of the appeal, or in the absence of agreement, short submissions.

Note: Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.

Background

Background to the litigation

Full text does not contain this section.

Evidence

Evidence Before The Court

Full text does not contain this section.

Decision

Reasons for decision

HAYNE J HAYNE J
In those circumstances, it is necessary to consider carefully the primary judge’s reasons with respect to validity.The judgment below The primary judge approached the challenge to the validity of the Design in the conventional way by first construing the Design and then making findings as to what made it new or original as compared to the prior art base. There seemed to be no significant dispute as to the principles of law to apply, including the interpretation of s 17 of the Act. The Design representations which accompanied the registration were as follows: The primary judge first dealt with the overriding principles of construction of a design (at [200]-[204]): (a)a design is the mental picture of a shape, configuration, pattern or ornamentation of the article to which it is to be applied;(b)construction is a question of fact for the Court to determine by the eye alone;(c)expert evidence may be led to assist the Court; (d)the Court is to apply an ‘instructed eye’ to the design - that is the Court must be made aware of the characteristics of the article to which the design is applied, and the manner in which such articles would normally be found in trade, commerce and in use; and(e)however, considerations of utility have no relevance to the proper construction of a design. Applying those principles and in light of the expert evidence led, the primary judge found that the primary feature was the sawtooth pattern consisting of six identical repeating pans, oriented vertically. The sawtooth pattern was the product of the unique proportions of the wavelength, amplitude and angles of each sawtooth module: see [202]-[212. The primary judge held that the zig-zag within the zig-zag or stiffener, that is the feature in the centre of each pan, was a secondary feature. Likewise, the flanges at the end of the sheet, as they would not be visible when applied to a fencing panel sheet because the flanges overlap at each end with the flanges of adjacent panels: see [217]-[220]. The Design was embodied in the GramLine sheet except that the stiffener was more prominent in the GramLine sheet, and the stiffener was oriented in the opposite direction (which can be understood by looking at the sawtooth profile design representation) to the Design: [221]-[222]. The primary judge then turned to assessing the novelty or originality of the Design. The primary judge first looked at the text of s 17 of the Act which states that a design must not be registered unless it was ‘new or original’, and then to the principles established by case law for ascertaining novelty and originality. The principles distilled by the primary judge were (at [231]-[239]): (a)there must be something special or distinctive about the appearance which captures and appeals to the eye; (b)there must be substantial novelty having regard to the nature of the article to which the design is to be applied; (c)in determining whether a design is new or original involves a comparison between the design and the prior art as necessary; (d)it is not possible to define the degree to which the design must differ from the prior art – it is a question of fact for the Court to determine;(e)one must look at the prior art and the design as a whole when comparing them – the question is whether an article made in accordance with the design would be substantially similar to an article made in accordance with the prior art; and (f)novelty and originality, like construction, is to be decided by applying the ‘instructed eye’.

Ratio Decidendi

Legal Principle Established

Established by: HAYNE J, HAYNE J

Consequently, the Design satisfied the requirements for novelty and originality pursuant to s 17(1)(b).Consideration As we have said, BlueScope has challenged the primary judge’s findings primarily in relation to the construction of the Design and the application of that construction when comparing the Design to the prior art. These two considerations overlapped in the presentation of argument. The construction of the design was for the Court to determine, with the aid of expert evidence. The design was to be looked at with an ‘instructed eye’. When construing the design with an ‘instructed eye’, consideration needs to be given to the manner in which the article to which the design is applied would normally be found in trade, commerce and in use: see Firmagroup Australia Pty Ltd v Byrne & Davidson Doors (Vic) Pty Ltd (1986) 11 FCR 415. The primary judge, in interpreting the Design, adopted this approach. We specifically do not accept the submission of BlueScope that the primary judge construed the Design by reference to one particular use. The primary judge, as we will endeavour to explain, determined the scope of the Design by looking at the design representations made in context. BlueScope have disclosed no error of the primary judge in this regard. We now turn to the specific errors said to be made by the primary judge in his construction of the Design and application of s 17. As we have indicated, to a large extent these issues overlapped, and the primary judge’s approach to infringement followed upon his construction of the Design.Orientation of the design The primary judge’s findings were that the instructed eye reading the Design would understand that it was for a vertical infill sheet which was to fit in a frame with posts and rails: at [202]; and therefore that the sawtooth pans run vertically down the face of the sheet: at [245]. BlueScope contended that this construction is impermissible and has the effect that fencing panels supplied for use horizontally with a modified post and rail system would not infringe the Design. While considerations of utility are not relevant, designs cannot be construed without context. It is often the case that features of the article to which the design applies, will serve both visual and functional purposes. Where this is the case, the implication of BlueScope’s submission is that the feature’s appearance and utility must be divorced. However, a design without context is a meaningless drawing. As Lockhart J observed in Dart Industries 15 IPR 403 at 408, the design is ‘the mental picture of the shape, configuration, pattern, or ornament of the article to which it has been applied’ (emphasis added). It is inescapable that the Design is for sheet metal fencing and the construction of the Design must reflect this. There was argument about the symmetry of the sheeting. The sheeting has a two-fold (that is the object appears the same after 180- and 360-degrees of rotation) rotational symmetry about an axis parallel to the grooves but no rotational symmetry about an axis perpendicular to the grooves.