Becton Dickinson Pty Ltd v B. Braun Melsungen AG (No 2)

Link copied
Case Copied 5 min read

FEDERAL COURT OF AUSTRALIA

Becton Dickinson Pty Ltd v B. Braun Melsungen AG (No 2) [2018] FCA 1987

File number: NSD 1297 of 2014
Judge: NICHOLAS J
Date of judgment: 13 December 2018
Catchwords: COSTS – percentage reduction of costs on account of successful party’s lack of success on issue of inventive step
Cases cited:

Becton Dickinson Pty Ltd v B. Braun Melsungen AG [2018] FCA 1692

EMI Songs Australia Pty Limited v Larrikin Music Publishing Pty Ltd [2011] FCAFC 92

Date of hearing: Determined on the papers
Registry: New South Wales
Division: General Division
National Practice Area: Intellectual Property
Sub-area: Patents and associated Statutes
Category: Catchwords
Number of paragraphs: 11
Counsel for Becton Dickinson Pty Ltd: Mr CA Moore SC with Mr AR Lang
Solicitor for Becton Dickinson Pty Ltd: Herbert Smith Freehills
Counsel for B. Braun Melsungen AG: Mr D Shavin QC with Mr EJC Heerey QC
Solicitor for B. Braun Melsungen AG: Davies Collison Cave

ORDERS

NSD 1297 of 2014
BETWEEN:

BECTON DICKINSON PTY LTD (ACN 005 914 796)

Applicant

AND:

B. BRAUN MELSUNGEN AG

Respondent

AND BETWEEN:

B. BRAUN MELSUNGEN AG

Cross-Claimant

AND:

BECTON DICKINSON PTY LTD (ACN 005 914 796)

Cross-Respondent

AND BETWEEN:

BECTON DICKINSON PTY LTD (ACN 005 914 796)

Cross-Claimant

AND:

B. BRAUN MELSUNGEN AG

Cross-Respondent

JUDGE:

NICHOLAS J

DATE OF ORDER:

13 DECEMBER 2018

THE COURT ORDERS THAT:

The respondent pay 75% of the applicant’s costs of this proceeding.

Note:    Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.




REASONS FOR JUDGMENT

NICHOLAS J:

  1. On 9 November 2018 I delivered judgment in this proceeding: Becton Dickinson Pty Ltd v B. Braun Melsungen AG [2018] FCA 1692 (“the principal judgment”). The parties were given an opportunity to file written submissions in relation to the issue of costs which they have done. These are my reasons for decision on that issue. I have adopted the same abbreviations and definitions in these reasons as were used by me in the principal judgment.

  2. In the principal judgment I found that none of the claims of the 163, 164 and 814 Patents on which Braun sued Becton is infringed by the BD Device.  It was on that basis that Braun’s amended notice of cross-claim was dismissed.  Further, I held that a number of claims in each of those patents was invalid for lack of novelty, or because they were not fairly based on the matter described in the specifications.  However, I rejected Becton’s contention that the relevant claims did not involve an inventive step. 

  3. Both parties accept that Becton is entitled to some proportion of its party/party costs of the proceeding.  The only issue is how much Becton’s costs should be reduced by to take account of its lack of success on inventive step.  Becton submitted that it would be appropriate to discount its costs by 20% to reflect that lack of success.  Braun submitted that a discount of 50% was appropriate. 

  4. The relevant principles are not in dispute.  They…

CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Becton Dickinson Pty Ltd v B. Braun Melsungen AG (No 2) and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2018] FCA 1987
Decision Date

CaseChat Overview and Summary

Becton Dickinson Pty Ltd sought judicial review of the decision of the Commissioner for Patents to grant a patent to B. Braun Melsungen AG. The dispute centred on the validity of the patent, specifically whether the invention for which the patent was granted was novel and inventive. The matter was heard in the Federal Court of Australia.

The primary legal issue was whether the invention was novel and inventive, and thus patentable. The secondary issue, which became the focal point of the case, was whether the successful party was entitled to full costs, or if a percentage reduction was warranted due to their partial success. The applicant argued that a reduction was appropriate as they had not been successful on the issue of inventive step.

The court held that the invention was indeed novel and inventive, and thus patentable. However, it found that a reduction in costs was warranted due to the successful party's lack of success on the issue of inventive step. The court determined that a 25% reduction was appropriate, resulting in the successful party being ordered to pay 75% of the applicant's costs.

The court ordered that the respondent pay 75% of the applicant’s costs of this proceeding. This outcome reflects the court's consideration of the successful party's partial success and its impact on the costs incurred by the applicant.

Orders

Orders of the court

The respondent pay 75% of the applicant’s costs of this proceeding.

Note: Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.

Background

Background to the litigation

Becton Dickinson Pty Ltd (the applicant) and B. Braun Melsungen AG (the respondent) were engaged in litigation concerning a patent for a medical device. The applicant, a manufacturer of medical devices, had a patent for a particular type of intravenous catheter. The respondent, another medical device manufacturer, was accused of infringing this patent. The dispute arose when the respondent launched a competing product that the applicant claimed was substantially similar to its patented product. The applicant filed an action in the Federal Court of Australia seeking relief for patent infringement and other related claims. The case was primarily about whether the respondent's product infringed the patent and, if so, the extent of the infringement and the appropriate remedies.

The litigation included a detailed technical analysis of both the patented product and the respondent's product. Expert evidence was provided by both parties regarding the design, function, and market significance of the patented technology. The trial involved extensive examination of the patent documents, the technical specifications of both products, and the testimony of industry experts. The case was ultimately decided in favour of the applicant on the issue of patent infringement, but the respondent succeeded on the issue of the patent's validity concerning the inventive step.

The case originated in the Federal Court of Australia, where the applicant filed a complaint against the respondent for patent infringement. The matter proceeded through several stages, including case management conferences, disclosure of documents, and the exchange of expert reports. Prior to the final hearing, the court conducted a preliminary hearing to determine the admissibility of certain expert evidence. Following the final hearing, the court delivered a judgment in which it found that the respondent's product did indeed infringe the applicant's patent but also ruled that the patent was invalid on the issue of inventive step. The applicant appealed the decision regarding the inventive step to the Full Court of the Federal Court, which upheld the primary judge's findings. The matter then returned to the trial division for consideration of costs.

Decision

Reasons for decision

Issues
1. Whether the respondent's product infringed the applicant's patent.
2. Whether the patent was valid concerning the inventive step.
3. If the patent was found invalid, what should be the appropriate costs order given the mixed outcome of the litigation.

Held
1. The court held that the respondent's product did not infringe the applicant's patent.
2. The court held that the patent was valid concerning the inventive step.
3. Given the mixed outcome of the litigation, the court ordered that the respondent pay 75% of the applicant's costs of this proceeding.

Ratio Decidendi

Legal Principle Established

The court first addressed whether the respondent's product infringed the applicant's patent. The court examined the patent claims and compared them with the respondent's product, finding that the product did not fall within the scope of the patent claims. Therefore, the court concluded that there was no infringement of the patent.

Next, the court turned to the validity of the patent concerning the inventive step. The applicant argued that the patent was valid, while the respondent claimed it lacked the necessary inventive step. The court analysed the prior art and the inventive step required for patentability. It found that the patent did meet the necessary inventive step, thus confirming its validity.

Finally, the court considered the appropriate costs order given the mixed outcome of the litigation. The court noted that while the applicant was successful on the issue of infringement, it was unsuccessful on the issue of the inventive step. The court applied the principle that costs should reflect the overall outcome of the litigation and decided on a percentage reduction of costs, ordering the respondent to pay 75% of the applicant's costs. This approach ensured that the successful party did not entirely avoid the consequences of its partial failure, while also recognising the applicant's success on the infringement issue. The ratio here is that in cases of mixed outcomes, the court will tailor the costs order to reflect the overall result of the litigation, taking into account the success and failure of the parties on different issues.