Tradespersons’ Rights Regulation Act 1946
Act No. 41 of 1946 as amended
This compilation was prepared on 5 March 2010
taking into account amendments up to Act No. 8 of 2010
The text of any of those amendments not in force
on that date is appended in the Notes section
The operation of amendments that have been incorporated may be
affected by application provisions that are set out in the Notes section
Prepared by the Office of Legislative Drafting and Publishing,
Attorney‑General’s Department, Canberra
Contents
Part I—Preliminary
1 Short title [see Note 1]
2 Commencement [see Note 1]
6 Interpretation
7 Territories
7A Act not to apply to certain persons
8 Act to bind Crown
9 Operation of Part VII
Part II—Engineering trades
10 Interpretation
11 Trades to which Part applies
12 Central Committee
13 Local Committees
14 Certain classes of recognised tradespersons
Part III—Boilermaking trades
15 Interpretation
16 Trades to which Part applies
17 Central Committee
18 Local Committees
18A Grant of tradespersons’ certificates
Part IV—Blacksmithing trades
20 Interpretation
21 Trades to which Part applies
22 Central Committee
23 Local Committees
24 Quorum of Committees
Part V—Electrical trades
25 Interpretation
26 Trades to which Part applies
27 Central Committee
28 Local Committees
28A Grant of tradespersons’ certificates
29 Licences and certificates under other laws
Part VI—Sheet metal trades
30 Interpretation
31 Trades to which Part applies
32 Central Committee
33 Local Committees
Part VIA—Boot trades
33A Interpretation
33B Trades to which Part applies
33C Central Committee
33D Local Committees
33E Recognition of tradespersons and probationary tradespersons
Part VII—Incorporated provisions
34 Powers of Central Committee etc.
35 Powers of Local Committees etc.
36 Quorum
37 Decision of questions before Committee
38 Investigation and report
39 Deputies
40 Deputy Chair
41 Recognition of tradespersons, probationary tradespersons and trainee tradespersons
42 Local Committee to be Industrial Committee
46 Register
47 Changes of address or employment to be notified
48 Persons removed from Register
49 Investigations
Part VIII—Miscellaneous
51A Regulations
The Schedules
First Schedule—Engineering trades
Second Schedule—Boilermaking trades
Third Schedule—Blacksmithing trades
Fourth Schedule—Electrical trades
Fifth Schedule—Sheet Metal trades
Sixth Schedule—Boot trades
Notes
An Act to make provisions in relation to the Regulation of Tradespersons’ Rights of Employment in certain Trades, and Employment of Members of the Forces in those Trades, and for other purposes
Preamble
WHEREAS regulations were made under the National Security Act 1939, or under that Act as amended, regulating the employment of persons, and providing for the temporary relaxation of certain customs favourable to recognised tradespersons, in the trades to which this Act applies:
AND WHEREAS it is necessary:
(a) to make provision for dealing with the abnormal industrial conditions directly resulting from the operation of those regulations; and
(b) to make provision for the training and employment of members of the Forces, as defined in this Act, in the trades to which this Act applies, as a measure of rehabilitation of those members:
BE it therefore enacted by the King’s…
Overview
The Tradespersons’ Rights Regulation Act 1946 was enacted by the Commonwealth Parliament to address the abnormal industrial conditions resulting from wartime regulations and to facilitate the rehabilitation of returned service members into the workforce. The Act initially aimed to regulate the employment of tradespersons in specific trades and provide for the recognition and certification of their skills, ensuring that wartime disruptions did not adversely affect the trades. Additionally, the Act sought to integrate members of the Defence Forces into trades by providing pathways for their training and employment. The policy objective of the Act was to stabilise the trades by ensuring a fair and regulated process for the recognition and employment of tradespersons, including veterans, thereby preventing potential industrial disputes and maintaining workforce standards.
Scope and Application
The Tradespersons’ Rights Regulation Act 1946 applies to specified tradespersons and employers within various trades, including engineering, boilermaking, blacksmithing, electrical, sheet metal, and boot trades. The Act governs the recognition, employment, and certification of tradespersons, ensuring that certain tradespersons, particularly those with relevant experience and skills, are recognized and certified. It applies to persons who were employed as tradespersons prior to certain dates, those who have qualified through apprenticeship or training, and those who have been employed for a specified period on work ordinarily performed by a tradesperson. The Act also applies to members of the Forces who have acquired the necessary skills during their service and to those who have trained and worked in corresponding trades outside Australia. The Act does not apply to members of the Forces who enlisted for a period exceeding three years and were not discharged within two years of ceasing war service. The Act has a Commonwealth jurisdictional reach and extends to the Australian Capital Territory and the Northern Territory, which are deemed to be part of New South Wales and South Australia, respectively. The Act also incorporates provisions from Part VII into each of the Parts II to VIA, and allows for the making of regulations to specify the application of the Act to particular trades or to cease its application to specified trades. The Governor-General may make cost recovery regulations to reimburse the Department for certain costs and expenses incurred in connection with the Act.
Key Provisions
- The Tradespersons’ Rights Regulation Act 1946 establishes the framework for the regulation of tradespersons' rights in various trades, including engineering, boilermaking, blacksmithing, electrical, sheet metal, and boot trades. The Act sets out the key provisions that govern the recognition and certification of tradespersons, the establishment of committees, and the enforcement mechanisms to ensure compliance. The main sections of the Act include definitions and interpretations, establishment of committees, grant of certificates, recognition of tradespersons, and enforcement provisions.
- Sections 10 to 33E of the Act define the trades to which the respective parts apply and establish the criteria for recognising tradespersons. These sections provide that certain tradespersons, including those who have been employed in the relevant trade prior to certain dates, have qualified as apprentices, completed their training, or have been employed for a specified period, may be recognised as tradespersons. Additionally, members of the forces who have acquired the necessary skills during their service may also be recognised.
- The Act establishes Central and Local Committees for each trade, as outlined in sections 12 to 33D. These committees are responsible for authorising the employment of probationary and trainee tradespersons, issuing tradespersons' certificates, and determining the conditions for granting certificates. The committees are to be composed of representatives appointed by the Minister, including representatives of employers and employees.
- Sections 18A and 28A of the Act provide that Local Committees may grant tradespersons' certificates to individuals who meet certain employment and competence criteria. These certificates are subject to the approval of the Central Committee and may require the individual to pass a test of competence.
- The Act imposes several obligations on the parties it governs. Employers must pay probationary tradespersons at least the prescribed wage rate for adults in the relevant trade. Trainee tradespersons must be paid at least the difference between the prescribed wage rate and the allowance payable under the Commonwealth Reconstruction Training Scheme or a vocational training scheme. Probationary and trainee tradespersons are not considered journeypersons for the purposes of computing the number of apprentices an employer may employ.
- Sections 46 to 49 of the Act outline the obligations of probationary and trainee tradespersons to notify the relevant Local Committee of any changes in address or employment within seven days. The Central and Local Committees are responsible for maintaining registers of tradespersons, probationary tradespersons, and trainee tradespersons, and for ensuring that these individuals comply with the Act's provisions.
- Breaches of the Act may result in civil or criminal consequences, depending on the nature of the offence. The Act does not explicitly outline penalties for breaches, but it does provide that any person who hinders or obstructs an officer or employee of the Commonwealth in the exercise of their powers under the Act commits an offence. The penalties for such offences are not specified in the Act but would be determined under the relevant criminal law.
- Overall, the Tradespersons’ Rights Regulation Act 1946 provides a comprehensive framework for the regulation of tradespersons' rights and the recognition of tradespersons in various trades, with a focus on ensuring that individuals with the necessary skills and experience are appropriately recognised and that the interests of employers and employees are balanced.
- Area of Law
- Corporate Law & Governance
- Instrument
- Act
- Concepts
- Commencement Provisions
- Delegated & Subordinate Legislation
- Licensing & Registration
- Reporting & Disclosure Obligations
- Enforcement Powers