Railway Standardization (South Australia) Agreement Act 1949

Administered by Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts

Legislation au C1949A00083 Not in force Act

Legislation content

RAILWAY STANDARDIZATION (SOUTH AUSTRALIA) AGREEMENT.

 

No. 83 of 1949.

An Act to authorize the execution by or on behalf of the Commonwealth of an Agreement between the Commonwealth and the State of South Australia, in relation to the Standardization of certain Railways, to approve of the Raising of Loans for Defence Purposes (namely, the Standardization of those Railways), and for other purposes.

[Assented to 28th October, 1949.]

BE it enacted by the King’s Most Excellent Majesty, the Senate, and the House of Representatives of the Commonwealth of Australia, as follows:—

Short title..

1. This Act may be cited as the Railway Standardization (South Australia) Agreement Act 1949.

Commencement.

2. This Act shall come into operation on the day on which it receives the Royal Assent.

Definitions.

3. In this Act, “the Agreement” means the Agreement the execution of which is authorized by this Act.


Execution of Agreement authorized.

4.—(1.) The execution, by or on behalf of the Commonwealth, of an agreement between the Commonwealth of Australia and the State of South Australia substantially in accordance with the form contained in the Schedule to this Act is hereby authorized.

(2.) The agreement so executed shall be deemed to have been approved by the Parliament of the Commonwealth.

Approval of loans for defence purposes.

5. Loans to the Commonwealth for defence purposes (namely, the standardization of railways in accordance with the Agreement) are approved.

 

THE SCHEDULE. Sec. 4.

—

RAILWAYS STANDARDIZATION AGREEMENT (SOUTH AUSTRALIA.)

Agreement made the  day of  , One thousand nine hundred and              between the COMMONWEALTH OF AUSTRALIA of the first part and the STATE OF SOUTH AUSTRALIA of the second part:

Whereas there are differences between the gauges of the railway lines of the parties:

And whereas, in order to assist in the defence and development of Australia, to facilitate interstate trade and commerce and to secure maximum efficiency and economy in railway operation, it is desirable to secure a uniform track gauge throughout the railway systems in Australia:

And whereas it is desirable, as part of the process of securing such uniform track gauge throughout the railway systems in Australia, that the railways of the State of South Australia be converted to standard gauge:

NOW THIS AGREEMENT WITNESSETH AS FOLLOWS:—

Part I.—Preliminary.

Definitions.

1.—(1.) In this Agreement, unless the context otherwise requires—

“betterment” means the provision of capacity or equipment in excess of appropriate standards to be fixed under this Agreement and which, although not essential to or necessary for a standardization work, may conveniently or desirably be provided in conjunction with such work;

“existing”, in relation to locomotives, rolling stock, or the capacity thereof, means existing at the time of the replacement or conversion of such locomotives or rolling stock;

“party” means party to this Agreement;

“standard gauge” means a gauge of four feet eight and one-half inches;

“standardization work” means any work…

Overview

The Railway Standardization (South Australia) Agreement Act 1949 was enacted to authorize the execution of an agreement between the Commonwealth of Australia and the State of South Australia concerning the standardization of certain railways. The primary motivation behind this legislation was to facilitate interstate trade and commerce, enhance defence capabilities, and improve railway operation efficiency by establishing a uniform track gauge throughout Australia. The Act received Royal Assent on 28 October 1949 and was enacted by the Parliament of the Commonwealth of Australia. The policy objective outlined in the Act is to secure a uniform track gauge throughout the railway systems in Australia, which is deemed essential for national defence, economic efficiency, and interstate trade. The Act authorizes the execution of an agreement that specifies the standardization of railway gauges and the division of financial responsibilities between the Commonwealth and the State of South Australia. The Act allows for the raising of loans for defence purposes, specifically for the standardization of railways as outlined in the Agreement. It also provides for the establishment of common standards for railway design and construction, inspection rights, and financial arrangements, including the sharing of costs and the establishment of a Loan Fund. The Agreement itself mandates that the standardization works, including the conversion of railway lines and rolling stock to standard gauge, must be approved by the respective parliaments of the Commonwealth and the State of South Australia. The Commonwealth is responsible for providing the majority of the funding for the standardization works, while the State of South Australia contributes a portion of the costs through annual payments over a specified period.

Scope and Application

The Railway Standardization (South Australia) Agreement Act 1949 applies to the Commonwealth of Australia and the State of South Australia, with respect to the standardization of railway gauges. This Act authorizes the execution of an Agreement between the Commonwealth and South Australia aimed at standardizing certain railway lines to a uniform track gauge. The primary focus is on converting South Australian railways from their existing 5’ 3” and 3’ 6” gauges to a standard gauge of four feet eight and one-half inches. The Act also approves loans to the Commonwealth for defence purposes, specifically for the standardization of these railways. The Act applies within the jurisdiction of South Australia, and its provisions are contingent upon approval by both the Commonwealth and South Australian Parliaments. There are no explicit exclusions or exemptions stated in the Act, although certain matters, such as the operation or maintenance of railways and betterments, are specifically excluded from the scope of the standardization works. The Act allows for the extension of its application through subordinate instruments, including the establishment of common standards of design and construction, and the preparation of plans and designs for the standardization works.

Key Provisions

  • The Railway Standardization (South Australia) Agreement Act 1949 (sections 1 to 5) provides the legislative framework to authorize the execution of an agreement between the Commonwealth of Australia and the State of South Australia for the standardization of certain railways. This agreement aims to facilitate defence and development of Australia, interstate trade, and efficient railway operations. The act authorizes the execution of the agreement and deems it approved by the Parliament of the Commonwealth upon its execution (section 4). The act also approves loans to the Commonwealth for defence purposes, specifically for the standardization of railways in accordance with the agreement (section 5).
  • The parties governed by this Act, namely the Commonwealth and the State of South Australia, are subject to several obligations and requirements. They must take every practicable step to have the Agreement approved by their respective parliaments without restrictions or amendments as soon as possible (Schedule, clause 2). The State of South Australia is obligated to permit authorized persons to inspect any standardization work being carried out and inspect relevant plans, designs, accounts, records, or documents (Schedule, clause 4). The State must also carry out specified works to convert its railways to standard gauge, including the conversion of locomotives, rolling stock, and terminal facilities (Schedule, clause 5). The parties are required to collaborate in establishing and publishing common standards of design and construction essential for the establishment of standard gauge railways and the safe and efficient operation of interchange traffic (Schedule, clause 10).
  • Breach of the obligations and requirements set out in this Act can result in various civil and criminal consequences. The act provides for the Minister's authority to determine the order and timing of the standardization works (Schedule, clause 9) and to approve expenditure from the Loan Fund (Schedule, clause 11). Non-compliance with these provisions may lead to disputes or litigation between the parties. The act also mandates annual budgets and audits of accounts related to the standardization works (Schedule, clauses 18 and 19). Failure to comply with these financial obligations could result in financial penalties or legal action. Furthermore, the act specifies that the cost of betterments and certain replacements shall be borne by the State concerned (Schedule, clause 15). Non-compliance with this financial obligation could lead to disputes over cost allocation and potential financial penalties.

Legal classification tags

Area of Law
Commercial Law
Environmental Law
Instrument
Act
Concepts
Definitions & Interpretation
Commencement Provisions
Licensing & Registration
Reporting & Disclosure Obligations
Enforcement Powers
Regulatory Standards
CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Railway Standardization (South Australia) Agreement Act 1949 and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Citations

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.