National Measurement Regulations 1999
Statutory Rules No. 110, 1999
made under the
National Measurement Act 1960
Compilation No. 18
Compilation date: 14 October 2024
Includes amendments: F2024L01299
About this compilation
This compilation
This is a compilation of the National Measurement Regulations 1999 that shows the text of the law as amended and in force on 14 October 2024 (the compilation date).
The notes at the end of this compilation (the endnotes) include information about amending laws and the amendment history of provisions of the compiled law.
Uncommenced amendments
The effect of uncommenced amendments is not shown in the text of the compiled law. Any uncommenced amendments affecting the law are accessible on the Register (www.legislation.gov.au). The details of amendments made up to, but not commenced at, the compilation date are underlined in the endnotes. For more information on any uncommenced amendments, see the Register for the compiled law.
Application, saving and transitional provisions for provisions and amendments
If the operation of a provision or amendment of the compiled law is affected by an application, saving or transitional provision that is not included in this compilation, details are included in the endnotes.
Editorial changes
For more information about any editorial changes made in this compilation, see the endnotes.
Modifications
If the compiled law is modified by another law, the compiled law operates as modified but the modification does not amend the text of the law. Accordingly, this compilation does not show the text of the compiled law as modified. For more information on any modifications, see the Register for the compiled law.
Self‑repealing provisions
If a provision of the compiled law has been repealed in accordance with a provision of the law, details are included in the endnotes.
Contents
Part 1—Preliminary
1 Name of regulations
3 Definitions
4 References to appointments, approvals and certificates
Part 2—Units of measurement
5 Australian legal units of measurement (Act, s 7A(1))
6 Additional legal units of measurement (Act, s 7A(2))
7 Prefixes specifying numerical values (Act, s 7A(3))
Part 3—Standards of measurement
Division 1—General
8 Definition for Part 3
9 Verification of Australian secondary standard of measurement
10 Verification of standards of measurement generally
Division 2—Verification of standards of measurement
11 Application of Division 2
12 Application for verification of standards of measurement
13 Verification of standards of measurement
14 Decision not to verify, or delay in verifying, standard of measurement
15 Marking of verified standards of measurement
Division 3—Marks and certificates of verification
16 Marks on, or attached to, standards of measurement
17 Certificates of verification of Australian primary and secondary standards of measurement
18 Certificates of verification of State primary standards of measurement
19 Certificates of verification of reference standards of measurement
20 Notification of determinations
21 Recognition of foreign reference standards of measurement
Division 4—When verifications cease to have effect and may be cancelled
22 When verification ceases to have effect
23 Grounds for cancellation of verification
Division 5—Accuracy, value and uncertainty of standards of measurement
25 Accuracy…
Overview
The National Measurement Regulations 1999, enacted under the National Measurement Act 1960, were introduced to address the need for a comprehensive framework governing the verification, certification, and regulation of measurement standards and instruments across Australia. These regulations were designed to ensure that measurement standards and instruments used in trade and legal contexts are accurate, reliable, and comply with national and international standards. This was particularly important to maintain consistency in measurements, which is critical for various sectors including trade, manufacturing, and law enforcement. The regulations were made by the Parliament of Australia to provide detailed provisions on the verification of standards of measurement, the certification of measuring instruments and reference materials, and the approval of patterns of measuring instruments. The overarching policy objective is to ensure that measurements are accurate and reliable, thus supporting fair trade practices and compliance with legal standards.
Scope and Application
The National Measurement Regulations 1999, made under the National Measurement Act 1960, apply across the Commonwealth of Australia and govern the use of units of measurement, the verification and certification of standards of measurement, artefacts, measuring instruments, and reference materials, and the activities of verifying, certifying, and approving authorities. The Act and its Regulations establish the legal units of measurement, permissible uncertainties and variations for standards of measurement, and conditions for the certification and verification of artefacts, measuring instruments, and reference materials. The scope of the Act and Regulations extends to various entities and industries, including manufacturers and traders who use measurement in their operations, by ensuring the accuracy and reliability of measurement standards and instruments. Certain standards, such as Australian primary and secondary standards of measurement, and defence equipment, are specifically excluded from the verification and certification processes outlined in the Regulations. The application and enforcement of these regulations can be extended or restricted through subordinate instruments, which allow for adjustments in the interpretation and implementation of the Act's provisions to address emerging needs or technologies in measurement.
Key Provisions
- The National Measurement Regulations 1999, as amended, are instrumental in governing the measurement standards and related practices in Australia. The regulations specify Australian legal units of measurement, which are the units of measurement for physical quantities listed in Schedule 1. These units are determined by the name, symbol, and definition mentioned in the Schedule. Additionally, the regulations define additional legal units of measurement that can be used for specific purposes outlined in Schedule 2. Prefixes that specify numerical values are also set out in Schedule 3. The verification and certification of standards and measuring instruments are detailed in various parts of the regulations. For instance, the verification of standards of measurement is addressed in Part 3, where the Chief Metrologist or other authorised verifying authorities may verify standards of measurement on application or otherwise, as specified. Certificates of verification must include specific details such as the date of verification, the value ascertained, and the accuracy of the verification. Standards of measurement must bear identifying marks, and verified standards must be marked with the date of verification and the fact that their value equals their denomination, if applicable.
- These regulations impose several obligations on parties and entities. For example, they mandate that verifying authorities must issue certificates of verification upon successful verification of standards and must provide reasons in writing if an application for verification is refused or delayed. Similarly, certifying authorities are required to mark certified measuring instruments with the date of certification and must ensure the instruments bear a mark identifying the particular instrument. Authorities must also adhere to conditions related to their appointments, such as participating in required training and complying with the Act and these regulations. The regulations also provide for the recognition of foreign reference standards and measuring instruments under specific conditions of comparability and verification.
- Breaches of the National Measurement Regulations 1999 can lead to civil or criminal consequences, although specific offences and penalties are not detailed within the provided text. However, the overarching National Measurement Act 1960 under which these regulations are made, does stipulate penalties for breaches, which can include fines and, in some cases, imprisonment. For example, knowingly using a measuring instrument that has been tampered with or altered without certification could attract penalties under the Act. The regulations also outline procedures for reconsideration and review of certain decisions made by authorities, providing a mechanism for affected parties to seek a review of decisions that do not meet their expectations.
- The regulations further specify procedures for the cancellation, variation, or withdrawal of verifications, certifications, approvals, and appointments, either on application or by the Chief Metrologist. These processes require the Chief Metrologist to notify the relevant parties of proposed actions and to provide reasons for such actions. The Chief Metrologist may then proceed with the proposed action if reasonable grounds exist, and must inform the parties of the decision and provide reasons if the decision is not varied as requested.
- Lastly, the regulations include provisions for the conversion of units of measurement, as well as fees for various activities related to the examination and certification of measuring instruments. These fees are subject to indexation and additional increases in specified financial years, as outlined in Schedule 13. Instruments such as authorisations, certificates, and permissions issued under these regulations are recognised as evidence in legal and administrative proceedings unless the contrary is proven.
- Area of Law
- Commercial Law
- Instrument
- Regulation
- Concepts
- Definitions & Interpretation
- Licensing & Registration
- Reporting & Disclosure Obligations
- Regulatory Standards
- Transitional Provisions
- Savings Provisions