Bounty (Machine Tools and Robots) Act 1985

Legislation au C2004A03172 Not in force Act

Legislation content

Bounty (Machine Tools and Robots) Act 1985

Act No. 133 of 1985 as amended

[Note: This Act was repealed by Act No. 9 of 2006 on 23 March 2006]

This compilation was prepared on 27 May 2003
taking into account amendments up to Act No. 140 of 2001

The text of any of those amendments not in force
on that date is appended in the Notes section

The operation of amendments that have been incorporated may be
affected by application provisions that are set out in the Notes section

Prepared by the Office of Legislative Drafting and Publishing,
Attorney‑General’s Department, Canberra

 

 

 

Contents

Part I—Preliminary

1 Short title [see Note 1]

2 Commencement

3 General administration of Act

4 Interpretation

5 Amendments of Tariff Act

6 Declarations relating to definitions

7 Declarations relating to specification, value or costs

8 Declarations of percentages

10 Value added—manufacture

11 Value added—modification

12 Factory cost

13 Determination of factory cost etc.

14 Accounting period

15 Uniformity

15A Application of the Criminal Code

Part II—Bounty

16 Specification of bounty

17 Amount of bounty

18 Availability of bounty

19 Good quality of bountiable equipment

Part III—Payment of Bounty

20 Advances on account of bounty

21 Claims for payment of bounty

22 Variation of inadequate claims

23 Variation of excessive claims

24 Producers to furnish returns of costs

25 Adjustment of claims following returns

26 Other adjustments of claims

27 Recovery of repayments

Part IV—Administration

28 Registration of premises

29 Accounts

30 Securities

31 Appointment of authorised officers

32 Stock‑taking and inspection of production and accounts etc.

33 Power to require persons to answer questions and produce documents

34 Power to examine on oath etc.

35 Offences

36 Time for prosecutions

37 Recovery of bounty on conviction

Part V—Miscellaneous

38 Return for Parliament

39 Delegation

40 Application for review

41 Statement to accompany notice of decisions

42 Money to be appropriated

43 Transitional

44 Regulations

Part VI—Amendment of Bounty (Metal‑Working Machine Tools) Act 1978

(sections 45 and 46)

Notes

 

An Act to provide for the payment of bounty on the production of certain machine tools, certain robots and related equipment, and for related purposes

Part I—Preliminary

 

1  Short title [see Note 1]

  This Act may be cited as the Bounty (Machine Tools and Robots) Act 1985.

2  Commencement

  This Act shall be deemed to have come into operation on 1 July 1985.

3  General administration of Act

  The Chief Executive Officer of Customs has the general administration of this Act.

4  Interpretation

 (1) In this Act, unless the contrary intention appears:

accounting period, in relation to a producer, has the meaning given by section 14.

advance means an advance on account of bounty under section 20.

advanced material means engineering ceramics, engineering composites or engineering polymers.

approved form means a form approved by the CEO in writing.

authorised officer means a person who is an authorised officer for the purposes of this Act by virtue of an appointment under…

Overview

The Bounty (Machine Tools and Robots) Act 1985 was enacted by the Australian Parliament to provide for the payment of bounty on the production of certain machine tools, certain robots, and related equipment. This legislation aimed to incentivise the domestic production of these high-technology manufacturing assets by offering financial support to manufacturers and modifiers. The bounty system was designed to encourage local production and thereby support the industrial and economic development of Australia by bolstering the domestic manufacturing sector. The Act was repealed by the Bounty and Other Legislation Repeal Act 2006 on 23 March 2006.

Scope and Application

The Bounty (Machine Tools and Robots) Act 1985 applies to persons and entities involved in the manufacture or modification of specified machine tools and robots within Australia. The Act governs the payment of bounty to manufacturers and modifiers of bountiable equipment, which includes computer controlled machines, numerically controlled machines, robotic machines, and independent machines, among others. The Act applies nationally across Australia and is administered by the Chief Executive Officer of Customs. There are no explicit exclusions or thresholds stated within the Act itself, but it does specify conditions under which bounty is not payable, such as when equipment is not of good and merchantable quality, or if it is exported to New Zealand. The Act allows for amendments through subordinate instruments, including declarations and determinations by the Minister and the CEO regarding definitions, specifications, values, and costs related to the equipment. The application of the Act can be extended or modified through regulations made by the Governor-General, which must not be inconsistent with the Act. The Act was repealed on 23 March 2006 by the Bounty (Repeal) Act 2006.

Key Provisions

  • The Bounty (Machine Tools and Robots) Act 1985 establishes a scheme for the payment of bounty on the production of certain machine tools, certain robots, and related equipment in Australia. The Act sets out the types of equipment eligible for bounty, the calculation of bounty, and the processes for making claims and receiving payments. The bounty is payable to manufacturers and modifiers of specified equipment, provided certain conditions are met, such as the equipment being manufactured or modified in Australia and meeting certain quality standards. The Act also details the obligations of manufacturers and modifiers, including the need to keep accurate records and accounts, and to register premises where the equipment is manufactured or modified. Failure to comply with these obligations can result in penalties, including fines and the ineligibility to receive bounty. Offences under the Act, such as providing false information or failing to comply with an order to produce documents, can result in criminal penalties, including fines and imprisonment. The Act further outlines the procedures for reviewing decisions made under the Act and the recovery of bounty in cases of overpayment or fraud.

Legal classification tags

Area of Law
Industrial Policy & Regulation
Trade & Commerce
Instrument
Act
Concepts
Definitions & Interpretation
Regulatory Standards
Licensing & Registration
Reporting & Disclosure Obligations
Enforcement Powers
Offence Provisions
CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Bounty (Machine Tools and Robots) Act 1985 and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Citations

Interactions

Authorises

All Versions

Sourced from the Federal Register of Legislation at 26 August 2026. For the latest information on Australian Government law please go to https://www.legislation.gov.au.