Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 (Qld)

Queensland Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Subordinate Legislation 2009 No. 128 made under the State Penalties Enforcement Act 1999 Workplace Health and Safety Act 1995 Contents Part 1 1 2 Part 2 3 4 5 6 7 8 9 10 11 Page Preliminary Short title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Commencement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Amendment of Workplace Health and SafetyRegulation 2008 Regulation amended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Amendment of s 16 (Meaning of assessment instrument) . . . . . . 4 Amendment of s 17 (Meaning of unit of competency) . . . . . . . . . 5 Amendment of s 18 (Authority to perform high risk work) . . . . . . 5 Amendment of s 25 (Authority to perform work in an earthmoving or particular crane operation) . . . . . . . . . . . . . . . . . 6 Amendment of s 50 (Supervision of performance of prescribed activity) ...................................... 7 Amendment of s 62 (Registered training organisation’s duty for assessing competency) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Amendment of s 66 (Other duties of registered training organisation) .................................... 8 Amendment of s 71 (Chief executive to decide application for training approval within 28 days) . . . . . . . . . . . . . . . . . . . . . . . . . 8

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Contents 12 13 14 15 16 17 18 19 20 21 22 23 24 Page 2 Amendment of s 72 (Grant of approval) . . . . . . . . . . . . . . . . . . . . Amendment of s 73 (Notice of refusal of application). . . . . . . . . . Amendment of pt 7, div 5, hdg (Suspension and cancellation of training approval) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Amendment of s 74 (Grounds for suspension or cancellation of approval). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Amendment of s 75 (Procedure for suspension or cancellation) . Amendment of s 76 (Immediate suspension of approval) . . . . . . Amendment of s 77 (When immediate suspension has effect until) ........................................ Amendment of s 146 (Removing ACM) . . . . . . . . . . . . . . . . . . . . Insertion of new pt 28, div 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Division 9 Transitional provision for Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 375 General induction training course completed before 1 July 2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement of sch 1 (Fees) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Schedule 1 Fees Amendment of sch 2 (Accredited courses) . . . . . . . . . . . . . . . . . Amendment of sch 5 (Classes of high risk work and units of competency for the classes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . Insertion of new sch 5A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Schedule 5A Classes of high risk work and units of competency for the classes under national standard Part 1 Scaffolding work 1 Basic scaffolder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Intermediate scaffolder. . . . . . . . . . . . . . . . . . . . . . . . 3 Advanced scaffolder . . . . . . . . . . . . . . . . . . . . . . . . . . Part 2 Rigging work 4 Dogger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Basic rigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Intermediate rigger . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Advanced rigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part 3 Crane and hoist operation 8 Tower crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Self-erecting tower crane . . . . . . . . . . . . . . . . . . . . . . 10 Derrick crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 8 9 9 9 9 10 10 10 10 11 18 18 19 20 20 20 21 21 21 21 21 22 22 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Contents 25 26 Part 3 27 28 11 Portal boom crane . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Bridge and gantry crane (open) . . . . . . . . . . . . . . . . . 13 Vehicle loading crane . . . . . . . . . . . . . . . . . . . . . . . . . 14 Non-slewing mobile crane . . . . . . . . . . . . . . . . . . . . . 15 Slewing mobile crane with a capacity of 20t or less . . 16 Slewing mobile crane with a capacity of 60t or less . . 17 Slewing mobile crane with a capacity of 100t or less . 18 Slewing mobile crane with a capacity of more than 100t ................................. 19 Materials hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Materials or personnel hoist . . . . . . . . . . . . . . . . . . . . 21 Boom-type elevating work platform . . . . . . . . . . . . . . 22 Mobile truck-mounted concrete placing boom . . . . . . Part 4 Forklift operation 23 Forklift truck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Order picking forklift truck. . . . . . . . . . . . . . . . . . . . . . Part 5 Pressure equipment operation 25 Turbine operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Reciprocating steam engine operator . . . . . . . . . . . . Amendment of sch 6 (Earthmoving or particular crane occupations and units of competency for the occupations) . . . . . Amendment of sch 18 (Dictionary) . . . . . . . . . . . . . . . . . . . . . . . . Amendment of State Penalties EnforcementRegulation 2000 Regulation amended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Amendment of sch 5 (Other legislation) . . . . . . . . . . . . . . . . . . . . 22 22 23 23 23 23 23 24 24 24 24 24 25 25 25 25 26 26 28 28 2009 SL No. 128 Page 3

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 1 Preliminary [s 1] Part 1 Preliminary 1 Short title This regulation may be cited as the Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 . 2 Commencement (1) Section 21 commences on 1 September 2009. (2) The remaining provisions of this regulation commence on 1 July 2009. Part 2 Amendment of Workplace Health and Safety Regulation 2008 3 Regulation amended This part amends the WorkplaceHealthandSafetyRegulation 2008. 4 Amendment of s 16 (Meaning of assessment instrument ) Section 16(1)— omit, insert— ‘(1) Assessment instrument , for a unit of competency for a class of high risk work, means— (a) before 1 July 2010— (i) the instrument for the unit of competency, issued by the chief executive, that relates to what is to be assessed for the unit of competency, how the 2009 SL No. 128 Page 4

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 5] assessment must be conducted and recording of the assessment results; or (ii) the nationally approved assessment instrument under the national standard; or (b) on or after 1 July 2010—the nationally approved assessment instrument under the national standard.’. 5 Amendment of s 17 (Meaning of unit of competency ) Section 17(1)— omit, insert— ‘(1) Unit of competency , for a class of high risk work, means— (a) before 1 July 2010— (i) the unit of competency stated in schedule 5 for the class of high risk work; or (ii) the unit of competency, under the national standard, that is stated in schedule 5A for the class of high risk work; or (b) on or after 1 July 2010—the unit of competency, under the national standard, that is stated in schedule 5A for the class of high risk work.’. 6 Amendment of s 18 (Authority to perform high risk work) (1) Section 18(5)(d)(iii)(A), ‘training approval’— omit, insert— ‘training and assessment approval’. (2) Section 18(8)— omit, insert— ‘(8) Subsection (1) does not apply to a worker, and subsection (2) does not apply to a person, in relation to high risk work that is the work of a dogger if— Page 5 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 7] (a) the worker or person holds the licence class operator of a vehicle loading crane and— (i) the load being lifted is lifted from the ground onto the vehicle on which the crane is mounted, or from the vehicle onto the ground; and (ii) the load being lifted is lifted within the view of the worker or person; or (b) the worker or person holds an earthmoving or particular crane work certificate for the occupation operator of a bridge and gantry crane in the circumstances mentioned in schedule 6, section 1(1)(a) and (b), and the load being lifted is lifted within the view of the worker or person.’. 7 Amendment of s 25 (Authority to perform work in an earthmoving or particular crane operation) (1) Section 25(3)(h)— omit, insert— ‘(h) the person holds evidence of competency that— (i) is attained in another State; and (ii) complies with former NOHSC document entitled ‘National Guidelines for Occupational Health and Safety Competency Standards for the Operation of Loadshifting Equipment and Other Types of Specified Equipment [NOHSC:7019 (1992)].’. (2) Section 25(4)(d)(iii)(A), ‘training approval’— omit, insert— ‘training and assessment approval’. (3) Section 25(6) and (7)— omit, insert— ‘(6) Subsection (1) does not apply to a worker, and subsection (2) does not apply to a person, in relation to work that is the operation of a bridge and gantry crane in the circumstances mentioned in schedule 6, section 1(1)(a) and (b), if the worker 2009 SL No. 128 Page 6

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 8] or person has authority to perform the work under a licence to perform a class of high risk work.’. 8 Amendment of s 50 (Supervision of performance of prescribed activity) (1) Section 50, heading, after activity— insert— ‘ by competent person ’. (2) Section 50(2)— renumber as section 50(3). (3) Section 50— insert— ‘(2) The holder of a certificate to perform a prescribed activity must give the chief executive written notice of a change in the competent person for a prescribed activity within 14 days after the change. Maximum penalty—10 penalty units.’. 9 Amendment of s 62 (Registered training organisation’s duty for assessing competency) Section 62— insert— ‘(2) A registered training organisation must ensure each person who trains or assesses the competency of a person in the general induction training course complies with the requirements of— (a) the Vocational Education, Training and Employment Act2000 in relation to the training or assessment; and (b) any agreement entered into by the registered training organisation for the training or assessment. Maximum penalty—40 penalty units.’. Page 7 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 10] 10 Amendment of s 66 (Other duties of registered training organisation) Section 66(b)(i), ‘training approval’— omit, insert— ‘training and assessment approval’. 11 Amendment of s 71 (Chief executive to decide application for training approval within 28 days) (1) Section 71, heading, ‘training approval’— omit, insert— ‘ training and assessment approval ’. (2) Section 71(1), ‘training approval’— omit, insert— ‘training and assessment approval’. 12 Amendment of s 72 (Grant of approval) (1) Section 72, ‘training approval’— omit, insert— ‘training and assessment approval’. (2) Section 72, ‘the approval’— omit, insert— ‘the training and assessment approval’. 13 Amendment of s 73 (Notice of refusal of application) Section 73(1), ‘training approval’— omit, insert— ‘training and assessment approval’. 2009 SL No. 128 Page 8

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 14] 14 Amendment of pt 7, div 5, hdg (Suspension and cancellation of training approval) Part 7, division 5, heading, ‘training approval’— omit, insert— ‘ training and assessment approval ’. 15 Amendment of s 74 (Grounds for suspension or cancellation of approval) (1) Section 74(1) and (2)(a), ‘training approval’— omit, insert— ‘training and assessment approval’. (2) Section 74(2)(b), ‘approval’— omit, insert— ‘training and assessment approval’. 16 Amendment of s 75 (Procedure for suspension or cancellation) (1) Section 75(1), (2) and (6), ‘training approval’— omit, insert— ‘training and assessment approval’. (2) Section 75(2)(a) and (b), ‘the approval’— omit, insert— ‘the training and assessment approval’. 17 Amendment of s 76 (Immediate suspension of approval) (1) Section 76(1)(a), (3)(a) and (e), ‘training approval’— omit, insert— ‘training and assessment approval’. (2) Section 76(1)(b), (2) and (3)(d)(ii), ‘approval’— Page 9 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 18] omit, insert— ‘training and assessment approval’. 18 Amendment of s 77 (When immediate suspension has effect until) Section 77(1), ‘training approval’— omit, insert— ‘training and assessment approval’. 19 Amendment of s 146 (Removing ACM) Section 146(4), ‘structure’— omit, insert— ‘place’. 20 Insertion of new pt 28, div 9 After section 374— insert— ‘Division 9 Transitional provision for Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 ‘375 General induction training course completed before 1 July 2009 ‘(1) This section applies if a person completes the accredited course 30215QLD—Course in general safety induction (construction industry) before the commencement of this section. ‘(2) A general induction card that evidences the person’s successful completion of the course is valid after the commencement.’. 2009 SL No. 128 Page 10

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 21] 21 Replacement of sch 1 (Fees) Schedule 1— omit, insert— ‘Schedule 1 Fees section 357 1 Notification of building and construction work (1) This section sets the fee, under section 129, for the notification of building and construction work. (2) The fee is 0.125% of the cost of the building and construction work. $ 2 Registration, or renewal of certificate of registration, of registrable plant (1) This section sets the fee for the following— (a) registration, under section 7, of registrable plant; (b) renewal, under section 111, of a certificate of registration of registrable plant. (2) The fee is— (a) subject to subsection (3), for a boiler with a heating surface of— (i) not more than 5m 2 . . . . . . . . . . . . . . . 66.40 (ii) more than 5m 2 but 10m 2 or less . . . . . 158.90 (iii) more than 10m 2 but 60m 2 or less . . . . 249.60 (iv) more than 60m 2 but 500m 2 or less . . . 478.20 (v) more than 500m 2 but 2000m 2 or less . 845.90 (vi) more than 2000m 2 . . . . . . . . . . . . . . . 1428.70 (b) for an unfired pressure vessel with a capacity of— Page 11 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 21] $ (i) more than 0.5m 3 but 5m 3 or less. . . . . 71.90 (ii) more than 5m 3 but 15m 3 or less . . . . . 122.80 (iii) more than 15m 3 but 30m 3 or less . . . . 185.00 (iv) more than 30m 3 . . . . . . . . . . . . . . . . . 243.40 (c) for a crane or hoist, other than a vehicle hoist, building maintenance unit or elevating work platform, with a safe working load of— (i) not more than 10t. . . . . . . . . . . . . . . . 134.00 (ii) more than 10t but 50t or less . . . . . . . 281.90 (iii) more than 50t. . . . . . . . . . . . . . . . . . . 352.70 (d) for a truck-mounted concrete placing unit with boom, other than manually powered. . 134.00 (e) for a building maintenance unit . . . . . . . . . 73.20 (f) for a service lift . . . . . . . . . . . . . . . . . . . . . 50.70 (g) for a lift other than a service lift . . . . . . . . 88.10 plus 20.40 for each floor (h) for an escalator. . . . . . . . . . . . . . . . . . . . . . 68.20 (i) for an airconditioning unit . . . . . . . . . . . . . 166.30 (j) for a specified amusement device classified as— (i) a class 2 amusement device in AS 3533, part 1 as in force on 5 December 1997, other than a coin operated amusement device. . . . . . . . 134.00 (ii) a class 3 amusement device in that part. . . . . . . . . . . . . . . . . . . . . . . . . . . 204.90 (iii) a class 4 amusement device in that part. . . . . . . . . . . . . . . . . . . . . . . . . . . 281.90 (iv) a class 5 amusement device in that part. . . . . . . . . . . . . . . . . . . . . . . . . . . 281.90 (3) If a boiler is heated electrically, the fee payable must be worked out on the basis that 1kW equals 0.08m 2 of heating surface. 2009 SL No. 128 Page 12

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 21] $ 3 Application for certificate of registration of registrable plant design The fee, under section 102, for an application for a certificate of registration of registrable plant design is . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.80 4 Certificates of authority of appointment of a workplace health and safety officer (1) This section sets the fee relating to a certificate of authority of appointment of a workplace health and safety officer under part 6. (2) The fee is— (a) for an assessment of qualifications or experience for the certificate. . . . . . . . . . . . (b) for an application, under section 57, for a certificate. . . . . . . . . . . . . . . . . . . . . . . . . . . (c) for an application, under section 114, to replace a lost, damaged, destroyed or stolen certificate. . . . . . . . . . . . . . . . . . . . . . . . . . . 27.80 55.10 27.80 5 Earthmoving or particular crane work certificates (1) This section sets the fee relating to an earthmoving or particular crane work certificate. (2) The fee is— (a) for an application, under section 80, for a certificate . . . . . . . . . . . . . . . . . . . . . . . . . . (b) for an application, under section 114, to replace a lost, damaged, destroyed or stolen certificate. . . . . . . . . . . . . . . . . . . . . 55.10 27.80 6 Licences to perform a class of high risk work (1) This section sets the fee relating to a licence to perform a class of high risk work. (2) The fee is— Page 13 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 21] (a) for an application, under section 82, for a licence to perform a class of high risk work— (i) for each licence class that is mentioned in subsection (3) and endorsed on the licence—the amount stated in subsection (4) for the licence class; or (ii) for each licence class that is endorsed on the licence and not mentioned in subsection (3) . . . . . . . . . . . . . . . . . . (b) for an application, under section 82, for a variation of a licence to perform a class of high risk work to endorse another class of high risk work on the licence— (i) for each additional licence class that is mentioned in subsection (3) and endorsed on the licence—the amount stated in subsection (4) for the licence class; or (ii) for each additional licence class that is not mentioned in subsection (3) and is endorsed on the licence. . . . . . (c) for an application, under section 96, for renewal of a licence to perform a class of high risk work . . . . . . . . . . . . . . . . . . . . . . (d) for an application, under section 114, to replace a lost, damaged, destroyed or stolen licence to perform a class of high risk work . . . . . . . . . . . . . . . . . . . . . . . . . . (3) For subsection (2)(a)(i) and (b)(i), the licence classes are as follows— (a) basic rigger; (b) intermediate rigger; (c) advanced rigger; (d) intermediate scaffolder; $ 70.10 70.10 64.70 27.80 2009 SL No. 128 Page 14

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 21] (e) advanced scaffolder; (f) intermediate boiler operator; (g) advanced boiler operator. (4) For subsection (2)(a)(i) or (b)(i), the amount is as follows— (a) for the licence class basic rigger— (i) if the applicant for the licence holds the licence class dogger. . . . . . . . . . . (ii) otherwise . . . . . . . . . . . . . . . . . . . . . . (b) for the licence class intermediate rigger— (i) if the applicant holds the licence class basic rigger . . . . . . . . . . . . . . . . (ii) if the applicant holds the licence class dogger but not basic rigger . . . . (iii) if the applicant does not hold the licence class dogger or basic rigger. . (c) for the licence class advanced rigger— (i) if the applicant holds the licence class intermediate rigger . . . . . . . . . . (ii) if the applicant holds the licence class basic rigger but not intermediate rigger . . . . . . . . . . . . . . (iii) if the applicant holds the licence class dogger but not basic rigger or intermediate rigger . . . . . . . . . . . . . . (iv) if the applicant does not hold any of the following licence classes— (A) dogger; (B) basic rigger; (C) intermediate rigger. . . . . . . . . . (d) for the licence class intermediate scaffolder— (i) if the applicant holds the licence class basic scaffolder . . . . . . . . . . . . . (ii) otherwise . . . . . . . . . . . . . . . . . . . . . . $ 70.10 140.20 70.10 140.20 210.30 70.10 140.20 210.30 280.40 70.10 140.20 Page 15 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 21] (e) for the licence class advanced scaffolder— (i) if the applicant holds the licence class intermediate scaffolder . . . . . . . (ii) if the applicant holds the licence class basic scaffolder but not intermediate scaffolder . . . . . . . . . . . (iii) if the applicant does not hold the licence class basic scaffolder or intermediate scaffolder . . . . . . . . . . . (f) for the licence class intermediate boiler operator— (i) if the applicant holds the licence class basic boiler operator . . . . . . . . . (ii) otherwise . . . . . . . . . . . . . . . . . . . . . . (g) for the licence class advanced boiler operator— (i) if the applicant holds the licence class intermediate boiler operator . . . (ii) if the applicant holds the licence class basic boiler operator but not intermediate boiler operator . . . . . . . (iii) if the applicant does not hold the licence class basic boiler operator or intermediate boiler operator . . . . . . . (5) A reference in subsection (4)— (a) to an applicant who holds a particular licence class includes a reference to an applicant who holds a corresponding authority to the licence class; or (b) to an applicant who does not hold a particular licence includes a reference to an applicant who does not hold a corresponding authority to that licence class. $ 70.10 140.20 210.30 70.10 140.20 70.10 140.20 210.30 2009 SL No. 128 Page 16

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 21] 7 Conversion to renewable licence to perform a class of high risk work (1) This section sets the fee for an application, under section 43, to convert a licence to perform a class of high risk work to a renewable licence. (2) The fee, irrespective of the number of licences to be converted, is . . . . . . . . . . . . . . . . . . . . . . . . . . $ 64.70 8 Certificates—prescribed activities (1) This section sets the fees relating to a certificate to perform a prescribed activity under part 4. (2) The fee is— (a) for an application, under section 47, for a certificate . . . . . . . . . . . . . . . . . . . . . . . . . . (b) for an application, under section 114, to replace a lost, damaged or destroyed certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 55.10 27.80 9 Certificate of appointment as an accredited provider (1) This section sets the fees relating to a certificate of appointment as an accredited provider under part 7. (2) The fee is— (a) for an application, under section 59, for a certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 55.10 (b) for an assessment of an application for a certificate, for each year or part of a year . 158.00 (c) for an application, under section 114, to replace a lost, damaged or destroyed certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 27.80 10 Bonded asbestos removal certificate (1) This section sets the fee relating to a bonded asbestos removal certificate. Page 17 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 22] (2) The fee is— (a) for an application, under section 53, for a certificate . . . . . . . . . . . . . . . . . . . . . . . . . . (b) for an application, under section 114, to replace a lost, damaged or destroyed certificate . . . . . . . . . . . . . . . . . . . . . . . . . . $ 55.10 27.80 11 Report about occupational health and safety performance for Workers’ Compensation Act (1) This section sets the fee for the preparation, under part 14, division 1A of the Act, of a report about the occupational health and safety performance of a single employer or group employer for the issue or renewal of a licence to be a self-insurer under the Workers’Compensation Act, section 71 or 72. (2) The fee is— (a) for a single employer . . . . . . . . . . . . . . . . . 993.90 (b) for a group employer . . . . . . . . . . . . . . . . . 1320.50’. 22 Amendment of sch 2 (Accredited courses) Schedule 2, ‘30215QLD Course in general safety induction (construction industry)’— omit. 23 Amendment of sch 5 (Classes of high risk work and units of competency for the classes) (1) Schedule 5, section 12(1)— omit, insert— ‘(1) The class of work is operator of a bridge and gantry crane having 3 or more powered operations. 2009 SL No. 128 Page 18

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 24] Note — See also sections 18(7) and 25(6), schedule 5A, section 12 (Bridge and gantry crane (open), schedule 6, section 1 (Bridge and gantry crane (remote control only)) and schedule 7, part 2, item 1.’. (2) Schedule 5, section 14(2), ‘less’— omit, insert— ‘more’. (3) Schedule 5, section 28(1), from ‘with’— omit. (4) Schedule 5, section 28— insert— ‘(3) In subsection (1)— turbine means industrial equipment in which steam acts on a turbine or rotor to cause a rotary motion, but does not include a steam turbine and expansion turbine with a power output of less than 500kW.’. 24 Insertion of new sch 5A After schedule 5— insert— Page 19 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 24] ‘Schedule 5A Classes of high risk work and units of competency for the classes under national standard section 17 and schedule 18, definition class of high risk work ‘Part 1 Scaffolding work ‘1 Basic scaffolder ‘(1) The class of work is basic scaffolder. ‘(2) The unit of competency for the class is CPCCLSF2001A: Licence to erect, alter and dismantle scaffolding basic level. ‘2 Intermediate scaffolder ‘(1) The class of work is intermediate scaffolder. ‘(2) The unit of competency for the class is CPCCLSF3001A: Licence to erect, alter and dismantle scaffolding intermediate level. ‘3 Advanced scaffolder ‘(1) The class of work is advanced scaffolder. ‘(2) The unit of competency for the class is CPCCLSF4001A: Licence to erect, alter and dismantle scaffolding advanced level. 2009 SL No. 128 Page 20

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 24] ‘Part 2 Rigging work ‘4 Dogger ‘(1) The class of work is dogger. ‘(2) The unit of competency for the class is CPCCLDG3001A: Licence to perform dogging. ‘5 Basic rigger ‘(1) The class of work is basic rigger. ‘(2) The unit of competency for the class is CPCCLRG3001A: Licence to perform rigging basic level. ‘6 Intermediate rigger ‘(1) The class of work is intermediate rigger. ‘(2) The unit of competency for the class is CPCCLRG3002A: Licence to perform rigging intermediate level. ‘7 Advanced rigger ‘(1) The class of work is advanced rigger. ‘(2) The unit of competency for the class is CPCCLRG4001A: Licence to perform rigging advanced level. ‘Part 3 Crane and hoist operation ‘8 Tower crane ‘(1) The class of work is operator of a tower crane. ‘(2) The unit of competency for the class is CPCCLTC4001A: Licence to operate a tower crane. Page 21 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 24] ‘9 Self-erecting tower crane ‘(1) The class of work is operator of a self-erecting tower crane. ‘(2) The unit of competency for the class is CPCCLTC4002A: Licence to operate a self-erecting tower crane. ‘10 Derrick crane ‘(1) The class of work is operator of a derrick crane. ‘(2) The unit of competency for the class is TLILIC408A: Licence to operate a derrick crane. ‘11 Portal boom crane ‘(1) The class of work is operator of a portal boom crane. ‘(2) The unit of competency for the class is TLILIC708A: Licence to operate a portal boom crane. ‘12 Bridge and gantry crane (open) ‘(1) The class of work is operator of a bridge and gantry crane having 3 or more powered operations. Note — See also sections 18(7) and 25(6), schedule 5, section 12 (Bridge and gantry crane (open), schedule 6, section 1 (Bridge and gantry crane (remote control only)) and schedule 7, part 2, item 1. ‘(2) For subsection (1), each of the following is a single powered operation— (a) raising and lowering a load; (b) moving the crane along runways; (c) traversing the hoisting mechanism across the bridge beam; (d) rotating the hoisting mechanism. ‘(3) The unit of competency for the class is TLILIC308A: Licence to operate a bridge and gantry crane. 2009 SL No. 128 Page 22

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 24] ‘13 Vehicle loading crane ‘(1) The class of work is operator of a vehicle loading crane with a capacity of 10 metre tonnes or more. ‘(2) The unit of competency for the class is TLILIC1208A: Licence to operate a vehicle loading crane (capacity ten metre tonnes and above). ‘14 Non-slewing mobile crane ‘(1) The class of work is operator of a non-slewing mobile crane with a capacity of more than 3t. ‘(2) The unit of competency for the class is TLILIC608A: Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity). ‘15 Slewing mobile crane with a capacity of 20t or less ‘(1) The class of work is operator of a slewing mobile crane with a capacity of 20t or less. ‘(2) The unit of competency for the class is TLILIC808A: Licence to operate a slewing mobile crane (up to 20 tonnes). ‘16 Slewing mobile crane with a capacity of 60t or less ‘(1) The class of work is operator of a slewing mobile crane with a capacity of 60t or less. ‘(2) The unit of competency for the class is TLILIC908A: Licence to operate a slewing mobile crane (up to 60 tonnes). ‘17 Slewing mobile crane with a capacity of 100t or less ‘(1) The class of work is operator of a slewing mobile crane with a capacity of 100t or less. ‘(2) The unit of competency for the class is TLILIC1008A: Licence to operate a slewing mobile crane (up to 100 tonnes). Page 23 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 24] ‘18 Slewing mobile crane with a capacity of more than 100t ‘(1) The class of work is operator of a slewing mobile crane with a capacity of more than 100t. ‘(2) The unit of competency for the class is TLILIC1108A: Licence to operate a slewing mobile crane (over 100 tonnes). ‘19 Materials hoist ‘(1) The class of work is operator of a materials hoist with a cantilever platform. ‘(2) The unit of competency for the class is CPCCLHS3002A: Licence to operate a materials hoist. ‘20 Materials or personnel hoist ‘(1) The class of work is operator of a materials or personnel hoist. ‘(2) The unit of competency for the class is CPCCLHS3001A: Licence to operate a personnel and materials hoist. ‘21 Boom-type elevating work platform ‘(1) The class of work is operator of a boom-type elevating work platform with a boom length of 11m or more. ‘(2) The unit of competency for the class is TLILIC508A: Licence to operate a boom-type elevating work platform (boom length 11 metres or more). ‘22 Mobile truck-mounted concrete placing boom ‘(1) The class of work is operator of a mobile truck-mounted concrete placing boom with a knuckle boom capable of power operated slewing and luffing. ‘(2) The unit of competency for the class is CPCCLBM3001A: Licence to operate a concrete placing boom. 2009 SL No. 128 Page 24

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 24] ‘Part 4 Forklift operation ‘23 Forklift truck ‘(1) The class of work is operator of a forklift truck, other than a pedestrian operated forklift truck. ‘(2) The unit of competency for the class is TLILIC108A: Licence to operate a forklift truck. ‘24 Order picking forklift truck ‘(1) The class of work is operator of an order picking forklift truck. ‘(2) The unit of competency for the class is TLILIC208A: Licence to operate an order picking forklift truck. ‘Part 5 Pressure equipment operation ‘25 Turbine operator ‘(1) The class of work is operator of a turbine. ‘(2) The unit of competency for the class is UEPOPL001A: Licence to operate a turbine. ‘(3) In subsection (1)— turbine means industrial equipment in which steam acts on a turbine or rotor to cause a rotary motion, but does not include a steam turbine and expansion turbine with a power output of less than 500kW. ‘26 Reciprocating steam engine operator ‘(1) The class of work is operator of a reciprocating steam engine with a piston diameter of more than 250mm. Page 25 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 25] ‘(2) The unit of competency for the class is UEPOPL002A: Licence to operate a reciprocating steam engine.’. 25 Amendment of sch 6 (Earthmoving or particular crane occupations and units of competency for the occupations) (1) Schedule 6, section 1, note— omit, insert— ‘ Note — See also sections 18(7) and 25(6), schedule 5, section 12 (Bridge and gantry crane (open), schedule 5A, section 12 (Bridge and gantry crane (open)) and schedule 7, part 2, item 1.’. (2) Schedule 6, section 1(2)— renumber as section 1(3). (3) Schedule 6, section 1— insert— ‘(2) For subsection (1), each of the following is a single powered operation— (a) raising and lowering a load; (b) moving the crane along runways; (c) traversing the hoisting mechanism across the bridge beam; (d) rotating the hoisting mechanism.’. 26 Amendment of sch 18 (Dictionary) (1) Schedule 18, definitions general induction card , general induction training course and training approval— omit. (2) Schedule 18— insert— 2009 SL No. 128 Page 26

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 2 Amendment of Workplace Health and Safety Regulation 2008 [s 26] ‘ general induction card means a document in the form of a card issued by a registered training organisation evidencing a person’s successful completion of the general induction training course and that includes— (a) the national provider code for the registered training organisation issued by the department that administers the Vocational Eduction, Training and Employment Act 2000 ; and (b) the name, date of birth and signature of the person to whom the card was issued; and (c) the date the card was issued. general induction training course means training in the unit of competency CPCCOHS1001A Work safely in the construction industry. national standard means the National Standard For Licensing Persons Performing High Risk Work declared under the Australian Workplace Safety Standards Act 2005 (Cwlth). Editor’s note — The national standard is available from the Safework Australia website at < training and assessment approval means an approval granted under section 72.’. (3) Schedule 18, definition class of high risk work , after ‘schedule 5’— insert— ‘or 5A’. (4) Schedule 18, definition general induction evidence , paragraph (a), after ‘ 2000 ’— insert— ‘that was issued within the last 14 days’. Page 27 2009 SL No. 128

Workplace Health and Safety and Another Regulation Amendment Regulation (No. 1) 2009 Part 3 Amendment of State Penalties Enforcement Regulation 2000 [s 27] Part 3 Amendment of State Penalties Enforcement Regulation 2000 27 Regulation amended This part amends the StatePenaltiesEnforcementRegulation 2000. 28 Amendment of sch 5 (Other legislation) Schedule 5, entry for the WorkplaceHealthandSafetyAct1995 , entry for section 24(1)— insert— ‘• section 146(3) 8 16’. ENDNOTES 1 Made by the Governor in Council on 25 June 2009. 2 Notified in the gazette on 26 June 2009. 3 Laid before the Legislative Assembly on . . . 4 The administering agency is the Department of Justice and Attorney-General. © State of Queensland 2009 2009 SL No. 128 Page 28