Work Health and Safety Regulations Amendment Regulations (No. 2) 2023 (WA)
Western Australia
Work Health and Safety Act 2020
Western Australia
Work Health and Safety Act 2020
Made by the Governor in Executive Council.
These regulations are the
These regulations come into operation as follows —
(a) Part 1 — on the day on which these regulations are published on the WA legislation website;
(b) the rest of the regulations — on the day after that day.
This Part amends the
In regulation 5 in the definition of
applies
In regulation 142C(2) and (3) delete “Class 2” (2
Note: The heading to amended regulation 142C is to read:
In regulation 225(1A) in the definition of
AS 1576.2:2016
In regulation 252(1A)(a)(i) delete “inspect the plant; and” and insert:
design the plant or verify the design of the plant; and
In the heading to Part 11.4 after “
After regulation 732 insert:
During the period of 2 years beginning on the day on which the
(1) In Schedule 3 in Table 3.1 after item 14 insert:
14A. | Non‑slewing mobile crane | Use of non‑slewing earthmoving machinery with a safe working load greater than 3 tonnes as a crane |
(2) In Schedule 3 in Table 3.1 after item 15 insert:
15A. | Slewing mobile crane — with a capacity up to 20 tonnes | Use of slewing earthmoving machinery with a safe working load greater than 3 tonnes as a crane |
(3) Delete Schedule 3 clause 2.
This Part amends the
(1) In regulation 5 delete the definition of
card holder and insert:
(2) In regulation 5 in the definition of
crane in the note delete “and Schedule 3 clause 2 apply” and insert:
applies
In regulation 94(2)(a) and (b) after “
In regulation 142C(2) and (3) delete “Class 2” (2
Note: The heading to amended regulation 142C is to read:
In regulation 225(1A) in the definition of
AS 1576.2:2016
(1) In regulation 675TA(1) delete the definition of
map coordinates .(2) In regulation 675TA(1) insert in alphabetical order:
In regulation 675ZZJ(1)(a)(ii) delete “the national register as defined in the
the National Register established under the
In the heading to Part 11.4 after “
After regulation 749 insert:
During the period of 2 years beginning on the day on which the
(1) In Schedule 3 in Table 3.1 after item 14 insert:
14A. | Non‑slewing mobile crane | Use of non‑slewing earthmoving machinery with a safe working load greater than 3 tonnes as a crane |
(2) In Schedule 3 in Table 3.1 after item 15 insert:
15A. | Slewing mobile crane — with a capacity up to 20 tonnes | Use of slewing earthmoving machinery with a safe working load greater than 3 tonnes as a crane |
(3) Delete Schedule 3 clause 2.
(1) Delete Schedule 27 clause 6(1).
(2) Delete Schedule 27 clause 6(2)(d)(i) and insert:
(i) carrying out mine transport and services in relation to quarry operations for at least 3 months; and
(ia) if the person will work at a mine where drilling and use of explosives is carried out at the mine — carrying out drilling and use of explosives in relation to quarry operations for at least 3 months; and
V. MOLAN, Clerk of the Executive Council
0
0
0