Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005 Amendment 2 (Cth)

Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005 Amendment 2

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated   29th June 2007

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. LEGISLATIVE PROVISIONS............................................................................ 3

1. AMENDMENT OF VEHICLE STANDARD...................................................... 3

SCHEDULE 1.................................................................................................................... 4

1. LEGISLATIVE PROVISIONS

1.1.Name of Legislative Instrument

1.1.1.This instrument is the Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005 Amendment 2.

1.1.2.This instrument may also be cited as Australian Design Rule — Definitions and Vehicle Categories Amendment 2.

1.2.Commencement

1.2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2.1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005.

SCHEDULE 1

1. Add the following, in alphabetical order, to 3.  DEFINITIONS

UNLADEN TRAILER MASS (UTM) - the mass transmitted to the ground by the ‘Axle’ or ‘Axles’ of the trailer when coupled to a drawing vehicle and in its normal unladen condition, and at which compliance with the appropriate Australian Design Rules has been or can be established.