Vehicle Standard (Australian Design Rule 57/00 Special Requirements for L-Group Vehicles) 2006 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 57/00 –Special Requirements for L-Group Vehicles) 2006 Amendment 1

I, PAUL FLETCHER, Minister for Territories, Local Government and Major Projects, determine this vehicle standard under section 7 of the Motor Vehicle Standards Act 1989.

Dated              11 November 2015

[Signed]

Paul Fletcher

Minister for Territories, Local Government and Major Projects

CONTENTS

1.           Legislative provisions

2.           Amendment of vehicle standard

SCHEDULE 1

1. LEGISLATIVE PROVISIONS

1.1.Name of Legislative Instrument

1.1.1.This instrument is the Vehicle Standard (Australian Design Rule 57/00 –Special Requirements for L-Group Vehicles) 2006 Amendment 1

1.2.Commencement

1.2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2.1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 57/00 –Special Requirements for L-Group Vehicles) 2006.

SCHEDULE 1

1. Clause 57.2.2.1  amend to read:

“Handlebars must not extend:

(a)   less than 250mm on each side of the centreline of the vehicle for all L Group vehicles;

(b)   more than 450mm on each side of the centreline of the vehicle for LA, LB and LE category vehicles; or

(c)   more than 550mm on each side of the centreline of the vehicle for all LC and LD category vehicles.”