Vehicle Standard (Australian Design Rule 44/01 – Specific Purpose Vehicle Requirements) 2006 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 44/01 – Specific Purpose Vehicle Requirements) 2006 Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated               20^th March 2007

SIGNED

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. LEGISLATIVE PROVISIONS............................................................................ 3

1. AMENDMENT OF VEHICLE STANDARD...................................................... 3

SCHEDULE 1.................................................................................................................... 4

1. LEGISLATIVE PROVISIONS

1.1.Name of Legislative Instrument

1.1.1.This instrument is the Vehicle Standard (Australian Design Rule 44/01 – Specific Purpose Vehicle Requirements) 2006 Amendment 1.

1.2.Commencement

1.2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2.1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 44/01 – Specific Purpose Vehicle Requirements) 2006.

SCHEDULE 1

1. Clause B.2, replace “@” with “shall”.

1. Clause 44.2.1.4.1, replace “trimmina” with “trimming”.

1. Clause 44.2.2.1.3, replace “ratting” with “rating”.

1. Clause 44.2.8.1, replace with the following

“44.2.8.1.   Doors

Every motor vehicle (motorhome) or trailer (‘Caravan’) equipped with fuel burning (cooking) facilities or living, or sleeping, accommodation shall have only outward-opening or sliding doors.  At least one such door shall be located on the left-hand side or at the rear.”