Vehicle Standard (Australian Design Rule 43/01 – Vehicle Configuration and Marking) 2006 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 43/01 – Vehicle Configuration and Marking) 2006 Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated               20^th March 2007

SIGNED

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. LEGISLATIVE PROVISIONS............................................................................ 3

1. AMENDMENT OF VEHICLE STANDARD...................................................... 3

SCHEDULE 1.................................................................................................................... 4

1. LEGISLATIVE PROVISIONS

1.1.Name of Legislative Instrument

1.1.1.This instrument is the Vehicle Standard (Australian Design Rule 43/01 – Vehicle Configuration and Marking) 2006 Amendment 1.

1.2.Commencement

1.2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2.1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 43/01 – Vehicle Configuration and Marking) 2006.

SCHEDULE 1

1. Clause 43.3.0.2.2, add to the end of the clause “satisfy the requirements of Clause 43.3.0.1 above.”