Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005

Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated               5^th OCTOBER  2007

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1.           LEGISLATIVE PROVISIONS

2.           AMENDMENT OF VEHICLE STANDARD

SCHEDULE 1

1.   LEGISLATIVE PROVISIONS

1.1                   Name of Legislative Instrument

1.1.1                This Instrument is the Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 1.

1.2                   Commencement

1.2.1                This Instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

1. 1                   The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005.

SCHEDULE 1

[1]                    Clause 10.1, replace with the following:

“10.1                Enclosed LE vehicles must meet the following requirements:”

[2]                   Insert a new clause

“14.5                Wheel Guards for MB, MC, MD1, MD2, MD3, NA and NB1 Category vehicles must comply with Clause 14.1 or Clause 14.2.”

[3]                    Replace Figures 1 and 2 with;