Vehicle Standard (Australian Design Rule 38/03 - Trailer Brake Systems) 2007 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 38/03 – Trailer Brake Systems) 2007 Amendment 1

I, JAMIE EDWARD BRIGGS, Assistant Minister for Infrastructure and Regional Development, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.

Dated              25/08 /2014       

SIGNED

Jamie Edward Briggs

Assistant Minister for Infrastructure and Regional Development

CONTENTS

1.           LEGISLATIVE PROVISIONS

2.           AMENDMENT OF VEHICLE STANDARD

SCHEDULE 1

1. LEGISLATIVE PROVISIONS

1.1.Name of Legislative Instrument

1.1.1.This instrument is the Vehicle Standard (Australian Design Rule 38/03 – Trailer Brake Systems) 2007 Amendment 1.

1.2.Commencement

1.2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2.1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 38/03 – Trailer Brake Systems) 2007.

SCHEDULE 1

1. Clause 2 amend “...from the dates set out in clauses 2.1, 2.2 and a table below” to “...from the dates set out in clauses 2.1, 2.2 and 2.5.”

1. Clause 2.4 renumber as 2.5

1. Insert a new clause 2.4 to read

“Vehicles certified to ADR 38/04 or a later version need not comply with this rule.”