Vehicle Standard (Australian Design Rule 35/05 - Commercial Vehicle Brake Systems) 2013 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 35/05 – Commercial Vehicle Brake Systems) 2013 Amendment 1

I, JAMIE EDWARD BRIGGS, Assistant Minister for Infrastructure and Regional Development, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.

Dated              25/08 /2014       

SIGNED

Jamie Edward Briggs

Assistant Minister for Infrastructure and Regional Development

CONTENTS

1. LEGISLATIVE PROVISIONS

1. AMENDMENT OF VEHICLE STANDARD

SCHEDULE 1

1. LEGISLATIVE PROVISIONS

1.1.Name of Legislative Instrument

1.1.1.This instrument is the Vehicle Standard (Australian Design Rule 35/05 – Commercial Vehicle Brake Systems) 2013 Amendment 1.

1.2.Commencement

1.2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2.1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 35/05 – Commercial Vehicle Brake Systems) 2013.

SCHEDULE 1

1. Clause 4.1.5.2.1 amend

“….shall satisfy all the relevant requirements in clause 7.13 of this standard;”

with

“….shall satisfy all the relevant requirements in clause 7 of this standard;”

1. Clause 4.1.5.2.3 insert additional text after “.......when any centre differential is unlocked.” to read:

“ …...when any centre differential is unlocked; or for all wheel drive vehicles fitted with a two speed transfer case, engagement of the higher of the two ranges.”

1. Clause 4.1.5.2.5 amend

“…..‘Antilock System’ of a trailer. A separate device for the trailer alone is not permitted.”

with:

“……‘Antilock System’ of a trailer. A separate device for the vehicle or the trailer alone is not permitted.”