Vehicle Standard (Australian Design Rule 35/02 – Commercial Vehicle Brake Systems) 2007 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 35/02 – Commercial Vehicle Brake Systems) 2007 Amendment 1

I, ANTHONY NORMAN ALBANESE, Minister for Infrastructure, Transport, Regional Development and Local Government, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated               24        February   2009

[Signed]

ANTHONY NORMAN ALBANESE

Minister for Infrastructure, Transport, Regional Development and Local Government

CONTENTS

1.           LEGISLATIVE PROVISIONS

2.           AMENDMENT OF VEHICLE STANDARD

SCHEDULE 1

1. LEGISLATIVE PROVISIONS

1..1.Name of Legislative Instrument

1..1.1.This instrument is the Vehicle Standard (Australian Design Rule 35/02 – Commercial Vehicle Brake Systems) 2007 Amendment 1.

1..2.Commencement

1..2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2..1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 35/02 – Commercial Vehicle Brake Systems) 2007.

SCHEDULE 1

1. Insert a new clause 8.2. to read

“The technical requirements adopted by the United Nations– Economic Commission for Europe (UNECE) Regulation No. 13-H– UNIFORM PROVISIONS CONCERNING THE APPROVAL OF PASSENGER CARS WITH REGARD BRAKING, incorporating the 00 series of amendments from supplement 5 onwards shall be deemed to be equivalent to the technical requirements of this standard for NA category vehicles.”