Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007 Amendment 1

I, PAUL FLETCHER, Minister for Urban Infrastructure, determine this vehicle standard under section 7 of the Motor Vehicle Standards Act 1989.

Dated  21 November 2017

[SIGNED]

Paul Fletcher

Minister for Urban Infrastructure

CONTENTS

1.           LEGISLATIVE PROVISIONS

2.           AMENDMENT OF VEHICLE STANDARD

SCHEDULE 1

1. LEGISLATIVE PROVISIONS

1.1.Name of Legislative Instrument

1.1.1.This instrument is the Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007 Amendment 1.

1.2.Commencement

1.2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2.1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007.

2.2.

SCHEDULE 1

1. Clause 3 omit “clause 3.2”, substitute “clause 3.3”.

1. Clause 3.2 renumber as 3.3.

1. Insert a new clause 3.2 to read

“Vehicles certified to ADR 33/01 or a later version need not comply with this rule.”

1. Clause 5.1 omit “clause 3.2”, substitute “clause 3.3”.