Vehicle Standard (Australian Design Rule 25/00 Anti-Theft Lock) 2006 Amendment 1 (Cth)

Vehicle Standard (Australian Design Rule 25/00 – Anti-Theft Lock) 2006 Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated               5 December 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. LEGISLATIVE PROVISIONS............................................................................ 3

1. AMENDMENT OF VEHICLE STANDARD...................................................... 3

SCHEDULE 1.................................................................................................................... 4

1. LEGISLATIVE PROVISIONS

1.1.Name of Legislative Instrument

1.1.1.This instrument is the Vehicle Standard (Australian Design Rule 25/00 – Anti-Theft Lock) 2006 Amendment 1.

1.2.Commencement

1.2.1.This instrument commences on the day after it is registered.

1. AMENDMENT OF VEHICLE STANDARD

2.1.The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 25/00 – Anti-Theft Lock) 2006.

SCHEDULE 1

1. Clause 25.1.2, replace “positron” with “position”.

1. Clause 25.2.5, replace “lock m the” with “lock in the”.

1. Clause 25.2.6.2, replace “engine-off” with “engine off”.