Untitled document

Victorian Energy Efficiency Target Amendment Regulations 2015

S.R. No. 167/2015

TABLE OF PROVISIONS

Regulation  Page

Part 1—Preliminary

1Objective

2Authorising provision

3Commencement

4Principal Regulations

Part 2—January 2016 amendments

5Definitions

6Prescribed activities

7Certificate not to be created more than once for same product or activity in residential premises

8Regulation 13 substituted

9Schedule 7 amended

10Schedule 8 amended

11Schedule 9 amended

12Schedule 10 amended

13Schedule 31 amended

14Schedule 32 amended

15Schedule 33 amended

16Schedule 34 amended

Part 3—February 2016 amendments

17Schedule 21 amended

Part 4—March 2016 amendments

18Schedule 21 amended

══════════════

Endnotes

STATUTORY RULES 2015

S.R. No. 167/2015

Victorian Energy Efficiency Target Act 2007

Victorian Energy Efficiency Target Amendment Regulations 2015

The Governor in Council makes the following Regulations:

Dated: 22 December 2015

Responsible Minister:

LILY D'AMBROSIO
Minister for Energy and Resources

ANDREW ROBINSON

Clerk of the Executive Council

Part 1—Preliminary

1Objective

The objective of these Regulations is to amend the Victorian Energy Efficiency Target Regulations 2008 to—

(a)modify the method and variables to be used to calculate in tonnes the carbon dioxide equivalent of greenhouse gases to be reduced by certain prescribed activities; and

(b)make changes to certain prescribed activities; and

(c)incorporate more recent versions of certain documents that are relevant to certain prescribed activities; and

(d)make other minor and technical amendments.

2Authorising provision

These Regulations are made under section 75 of the Victorian Energy Efficiency Target Act 2007.

3Commencement

(1)These Regulations (except Parts 3 and 4) come into operation on 1 January 2016.

(2)Part 3 comes into operation on 1 February 2016.

(3)Part 4 comes into operation on 1 March 2016.

4Principal Regulations

In these Regulations, the Victorian Energy Efficiency Target Regulations 2008[1] are called the Principal Regulations.

Part 2—January 2016 amendments

5Definitions

In regulation 4 of the Principal Regulations insert the following definition—

"three-phase cage induction motor means an electric motor that is within the scope of AS/NZS 1359.5:2004 as described in clause 1.1 of that Standard but does not include equipment of the type referred to in clause 1.2 of that Standard;".

6Prescribed activities

(1)In regulation 6(1) of the Principal Regulations—

(a)in paragraphs (g), (h) and (j), omit "if the premises are in a non-gas reticulated area,";

(b)for paragraph (q) substitute—

"(q)installing lamps that comply with the criteria specified in Part A of Schedule 21 in place of incandescent lamps that do not comply with those criteria and—

(i)decommissioning the non‑complying incandescent lamps; and

(ii)if the installed lamps comply

with the criteria specified in item 21D in Part A of Schedule 21, decommissioning the transformer associated with the non‑complying incandescent lamps;".

(2)In regulation 6(3) of the Principal Regulations—

(a)for paragraphs (a), (b) and (c) substitute—

"(a)installing a motor that complies with the criteria specified in Part A of Schedule 31;

(b)installing a refrigerated display cabinet that complies with the criteria specified in Part A of Schedule 32;

(c)installing a fan motor that complies with the criteria specified in Part A of Schedule 33 in a refrigerated display cabinet, commercial freezer or cool room;";

(b)in paragraph (d) omit "in a building or structure that is classified under Part A3 of the 2008 edition of the Building Code as Class 5, 6, 7, 8, 9 or 10(b),".

7Certificate not to be created more than once for same product or activity in residential premises

In regulation 8(2)(c) of the Principal Regulations omit "18 or".

8Regulation 13 substituted

For regulation 13 of the Principal Regulations substitute—

"13   Prescribed greenhouse gas scheme

For the purposes of the definition of prescribed greenhouse gas scheme in section 3(1) of the Act, the scheme established under the Carbon Credits (Carbon Farming Initiative) Act 2011 of the Commonwealth for the issue of Australian carbon credit units in relation to eligible offsets projects is prescribed.".

9Schedule 7 amended

(1)In Schedule 7 to the Principal Regulations,

for "If the premises are in a non-gas reticulated area, decommissioning" substitute "Decommissioning".

(2)In Schedule 7 to the Principal Regulations, in Part A, for item 7A substitute—

"7AA product that—

(a)complies with the MEPS requirement

set out in column 4 of Table 3.1 of AS/NZS 3823.2:2013; and

(b)achieves an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of not less than 3.7; and

(c)has a rated output heating capacity, as determined in accordance with AS/NZS 3823.1.2:2012, of not less than 10kW at the H1 temperature condition; and

(d)is listed on the ESC register.".

(3)In Schedule 7 to the Principal Regulations, in Part B, for the item headed "7A Abatement factor:" substitute—

"7AAbatement factor:

(a)If the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.2:2012, of not less

than 10 and not more than 18 kW at the H1 temperature condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 3×7 and not more than 3∙99:    1∙25;

(ii)not less than 4 and not more
than 4∙29:   4∙62;

(iii)not less than 4∙3 and not more
than 4∙59:    7∙52;

(iv)4∙6 or more:   10∙04;

(b)If the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.2:2012, of more

than 18 and not more than 28 kW at the H1 temperature condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 3∙7 and not more than 3∙99:    3∙25;

(ii)not less than 4 and not more
than 4∙29:   7∙51;

(iii)not less than 4×3 and not more than 4∙59: 11∙18;

(iv)4∙6 or more:   14∙37;

(c)If

the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.2:2012, of more

than 28 kW at the H1 temperature

condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 3∙7 and not more than 3∙99:    6∙26;

(ii)not less than 4 and not more
than 4∙29:   11∙58;

(iii)not less than 4∙3 and not more than 4∙59:  16∙15;

(iv)4∙6 or more:   20∙13.".

(4)In Schedule 7 to the Principal Regulations, in Part B, in the item headed "7A Regional factor:"—

(a)in paragraph (c), for "1∙71"
substitute "1∙72";

(b)in paragraph (d), for "0∙74"
substitute "0∙75".

10Schedule 8 amended

(1)In Schedule 8 to the Principal Regulations,

for "If the premises are in a non-gas reticulated area, decommissioning" substitute "Decommissioning".

(2)In Schedule 8 to the Principal Regulations, in Part A, for item 8A substitute—

"8AA product that—

(a)complies with the MEPS requirement

set out in column 4 of Table 3.1 of AS/NZS 3823.2:2013; and

(b)achieves an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of not less

than 3.7; and

(c)has a rated output heating capacity, as determined in accordance with AS/NZS 3823.1.2:2012, of not less than 10 kW at the H1 temperature condition; and

(d)is listed in the ESC register.".

(3)In Schedule 8 to the Principal Regulations, in Part B, for the item headed "8A Abatement factor:" substitute—

"8A  Abatement factor:

(a)If the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.2:2012, of not less

than 10 and not more than 18 kW at the H1 temperature condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 3∙7 and not more

than 3∙99:   102∙0;

(ii)not less than 4 and not more

than 4∙29:   107∙0;

(iii)not less than 4∙3 and not more than 4∙59:  111∙2;

(iv)4∙6 or more:   114∙8;

(b)If the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.2:2012, of more

than 18 and not more than 28 kW at the H1 temperature condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 3∙7 and not more than 3∙99:  129·9;

(ii)not less than 4 and not more

than 4∙29:   136∙0;

(iii)not less than 4∙3 and not more than 4∙59:  141∙2;

(iv)4∙6 or more:   145∙8;

(c)If

the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.2:2012, of more

than 28 kW at the H1 temperature

condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 3∙7 and not more than 3∙99:  165∙4;

(ii)not less than 4 and not more
than 4∙29:   172∙7;

(iii)not less than 4∙3 and not more
than 4∙59:   179∙0;

(iv)4∙6 or more:   184∙5.".

(4)In Schedule 8 to the Principal Regulations, in Part B, in the item headed "8A Regional factor:"—

(a)in paragraph (c), for "1∙75"
substitute "1∙79";

(b)in paragraph (d), for "0∙67"
substitute "0∙61".

11Schedule 9 amended

In Schedule 9 to the Principal Regulations, in Part B—

(a)in the item headed "9A Abatement factor:"—

(i)in paragraph (a)(i), for "4∙32" substitute "5∙36";

(ii)in paragraph (a)(ii), for "4∙83" substitute "5∙86";

(iii)in paragraph (b)(i), for "8∙19" substitute "9∙61";

(iv)in paragraph (b)(ii), for "9∙17" substitute "10∙55";

(v)in paragraph (c)(i), for "10∙22" substitute "13∙22";

(vi)in paragraph (c)(ii), for "11∙44" substitute "14∙39";

(b)in the item headed "9A Regional factor:"—

(i)in paragraph (a)(ii), for "0∙32" substitute "0∙22";

(ii)in paragraph (a)(iii), for "0∙51" substitute "0∙36";

(iii)in paragraph (a)(iv), for "0∙22" substitute "0∙15";

(iv)in paragraph (b)(ii), for "0∙39" substitute "0∙29";

(v)in paragraph (b)(iii), for "0∙63" substitute "0∙46";

(vi)in paragraph (b)(iv), for "0∙27" substitute "0∙20".

12Schedule 10 amended

(1)In Schedule 10 to the Principal Regulations, for "If the premises are in a non-gas reticulated area, installing" substitute "Installing".

(2)In Schedule 10 to the Principal Regulations, in Part A, for item 10A substitute—

"10AA product that—

(a)complies with the MEPS requirement
set out in column 4 of Table 3.1 of AS/NZS 3823.2:2013; and

(b)achieves an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013 when tested in accordance with AS/NZS 3823.1.1:2012, of not less than 4; and

(c)has a heating capacity, as determined in accordance with AS/NZS 3823.1.1:2012, of not less than 2 kW at the H1 temperature condition; and

(d)is listed in the ESC register.".

(3)In Schedule 10 to the Principal Regulations, in Part B, for the item headed "10A Abatement factor:" substitute—

"10AAbatement factor:

(a)If the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.1:2012, of not less

than 2 and not more than 2∙99 kW at the H1 temperature condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 4 and not more
than 4∙49:   4∙64;

(ii)not less than 4∙5 and not more
than 4∙99:   5∙48;

(iii)not less than 5 and not more
than 5∙49:   6∙14;

(iv)5∙5 or more:   6∙69;

(b)If the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.1:2012, of not less

than 3 and not more than 6 kW at the H1 temperature condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 4 and not more
than 4∙49:   8∙33;

(ii)not less than 4∙5 and not more
than 4∙99:   9∙91;

(iii)not less than 5 and not more
than 5∙49:   11∙17;

(iv)5∙5 or more:   12∙20;

(c)If the product has a heating capacity, as determined in accordance with AS/NZS 3823.1.1:2012, of more

than 6 kW at the H1 temperature

condition and has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of—

(i)not less than 4 and not more
than 4∙49:   11∙51;

(ii)not less than 4∙5 and not more
than 4∙99:   13∙42;

(iii)not less than 5 and not more
than 5∙49:   14∙95;

(iv)5∙5 or more:   16∙20.".

(4)In Schedule 10 to the Principal Regulations, in Part B, for the item headed "10A Regional factor:" substitute—

"10ARegional factor:

(a)If the product has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of not less

than 4 and is installed in metropolitan Victoria:    1×00;

(b)If the product has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of not less

than 4 and not more than 4∙49 and—

(i)is installed in regional Victoria—

climatic region Mild:   0∙12;

(ii)is installed in regional Victoria—

climatic region Cold:   0∙24;

(iii)is installed in regional Victoria—

climatic region Hot:   0∙02;

(c)If the product has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of not less

than 4∙5 and not more than 4∙99 and—

(i)is installed in regional Victoria—

climatic region Mild:   0∙27;

(ii)is installed in regional Victoria—

climatic region Cold:   0∙44;

(iii)is installed in regional Victoria—

climatic region Hot:   0∙16;

(d)If the product has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of not less

than 5 and not more than 5∙49 and—

(i)is installed in regional Victoria—

climatic region Mild:   0∙39;

(ii)is installed in regional Victoria—

climatic region Cold:   0∙63;

(iii)is installed in regional

Victoria—climatic region Hot:          0∙29;

(e)If the product has an annual coefficient of performance, as determined in accordance with AS/NZS 3823.2:2013, of 5∙5 or more and—

(i)is installed in regional Victoria—

climatic region Mild:   0∙50;

(ii)is installed in regional Victoria—

climatic region Cold:   0∙79;

(iii)is installed in regional Victoria—

climatic region Hot:   0∙38.".

13Schedule 31 amended

(1)In Schedule 31 to the Principal Regulations—

(a)in the heading omit "REPLACING AN ELECTRIC MOTOR";

(b)for "Prescribed activity under regulation 6(3)(a): Decommissioning
a three-phase electric motor with a
minimum rated output between 0∙75 and 185 kW that does not comply with the criteria specified in Part A of Schedule 31 and installing a product that complies with the criteria specified in Part A of Schedule 31." substitute "Prescribed activity under regulation 6(3)(a): Installing a
three-phase induction motor that complies with the criteria specified in Part A of Schedule 31.".

(2)In Schedule 31 to the Principal Regulations, in Part A, for item 31A substitute—

"31AA three-phase cage induction motor that—

(a)has a rated output, as determined in accordance with AS 60034.1-2009, of not less than 0∙75 and not more than 185 kW; and

(b)is labelled or marked as a high efficiency motor; and

(c)does not meet the requirements for an IE4 (super-premium) efficiency level
motor proposed in Appendix A of IEC/TS 60034‑31 when tested in
accordance with IEC 60034-2-1; and

(d)has 2, 4, 6 or 8 poles; and

(e)is listed on the ESC register.".

(3)In Schedule 31 to the Principal Regulations, in Part A, for item 31B substitute—

"31BA three-phase cage induction motor that—

(a)has a rated output, as determined in accordance with AS 60034.1-2009, of not less than 0∙75 and not more than
185 kW; and

(b)meets the requirements for an IE4 (super‑premium) efficiency level
motor proposed in Appendix A of IEC/TS 60034-31 when tested in
accordance with IEC 60034-2-1; and

(c)has 2, 4 or 6 poles; and

(d)is listed on the ESC register.".

(4)In Schedule 31 to the Principal Regulations,
in Part B, omit "the decommissioning of a three‑phase electric motor with a rated output between 0∙75 and 185kW that does not meet the requirements of Part A and".

(5)In Schedule 31 to the Principal Regulations, in Part B, in item 31A, for column 3 of the Table substitute—

"

Column 3
Abatement factor

0∙28

0∙38

0∙45

0∙61

1∙03

1∙27

1∙60

1∙99

3∙74

4∙64

5∙42

6∙12

7∙75

8∙71

13∙33

15∙16

19∙51

20∙55

32∙71

34∙92

38∙33

47∙28

".

(6)In Schedule 31 to the Principal Regulations, in Part B, in item 31B, for column 3 of the Table substitute—

"

Column 3
Abatement factor

0∙55

0∙76

0∙88

1∙25

2∙08

2∙46

3∙50

4∙17

8∙56

10∙02

11∙72

13∙77

15∙83

17∙94

27∙47

31∙69

34∙89

38∙09

55∙51

58∙09

57∙59

78∙20

".

(7)In Schedule 31 to the Principal Regulations, in Part C, for the item headed "31A–31B" substitute—

"31A–31BAt the beginning of the day on which the installed product is first able to deliver power.".

14Schedule 32 amended

(1)In Schedule 32 to the Principal Regulations—

(a)in the heading omit "REPLACING A REFRIGERATED DISPLAY CABINET";

(b)for "Prescribed activity under regulation 6(3)(b): Decommissioning a refrigerated display cabinet that does not comply with the criteria specified in Part A of Schedule 32 and installing a product that complies with the criteria specified in Part A of Schedule 32." substitute "Prescribed activity under regulation 6(3)(b): Installing a refrigerated display cabinet that complies with the criteria specified in Part A of Schedule 32.".

(2)In Schedule 32 to the Principal Regulations, in Part A, for item 32A substitute—

"32AA refrigerated display cabinet that is—

(a)rated as 'high efficiency' within the meaning of AS 1731.14-2003 published on 1 October 2003 and reissued July 2012 incorporating Amendment No. 2 when tested in accordance with—

(i)AS 1731.9-2003 published on 1 October 2003 and reissued December 2005 incorporating Amendment No. 1; and

(ii)AS 1731.12-2003 published on 1 October 2003 and reissued December 2005 incorporating Amendment No. 1; and

(b)listed on the ESC register.".

(3)In Schedule 32 to the Principal Regulations, in Part B—

(a)in the text after the heading to that Part omit "the decommissioning of a refrigerated display cabinet and";

(b)in the first item, for "(within the meaning of Appendix A of AS 1731.14-2003 published on 1 October 2003 and reissued December 2005 incorporating Amendment No. 1)" substitute "(within the meaning of Appendix A of AS 1731.14-2003 published on 1 October 2003 and reissued July 2012 incorporating Amendment No. 2)".

(4)In Schedule 32 to the Principal Regulations, in Part B, for column 3 of the Table substitute—

"

Column 3

Abatement factor

   10∙69

   18∙19

   10∙80

   14∙44

   11∙60

   15∙69

     7∙62

   11∙03

   11∙03

Column 3

Abatement factor

   12∙62

     9∙55

   10∙23

   10∙35

   14∙55

   29∙68

   51∙62

   16∙60

   15∙24

   10∙35

   61∙97

   24∙79

   27∙06

   22∙63

   16∙83

     7∙73

   10∙46

   22∙17

   17∙62

   25∙47

   16∙71

   17∙97

     5∙34

   27∙97

   27∙97

".

(5)In Schedule 32 to the Principal Regulations, in Part C, for item 32A substitute—

"32AAt the beginning of the day on which the installed product is first able to deliver refrigeration.".

15Schedule 33 amended

(1)In Schedule 33 of the Principal Regulations—

(a)in the heading, for "REPLACEMENT" substitute "MOTOR";

(b)for "Prescribed activity under regulation 6(3)(c): Installing a product
that complies with the criteria specified in Part A of Schedule 33 after decommissioning a fan that is used in a refrigerated display cabinet, commercial freezer or cool room and its associated motor, being a motor that is of a certain type." substitute "Prescribed activity under regulation 6(3)(c): Installing a product that complies with the criteria specified in Part A of Schedule 33 in a refrigerated display cabinet, commercial freezer or cool room.".

(2)In Schedule 33 of the Principal Regulations, in Part A, for item 33A substitute—

"33AA fan that is powered by an electronically commutated motor (being a permanent magnet motor with electronic commutation) that is listed in the ESC register and—

(a)in the case of an internal rotor motor, has a rated motor output of not more than 600 watts; or

(b)in the case of an external rotor motor, has a rated motor input of not more than 800 watts.".

(3)In Schedule 33 of the Principal Regulations, in Part B—

(a)omit "the decommissioning of a fan and its associated motor and";

(b)in the item headed "33A Abatement factor", for "0∙02952" substitute "0∙03357".

(4)In Schedule 33 of the Principal Regulations, in Part C, for item 33A substitute—

"33A At the beginning of the day on which the installed motor is first able to deliver power to the installed fan.".

16Schedule 34 amended

(1)In Schedule 34 to the Principal Regulations, in Part A, for items 34A to 34D substitute—

"34A  A T5 adaptor that—

(a)has a lamp with a minimum wattage of 14 watts; and

(b)has a power factor of at least 0∙9; and

(c)has a ballast made from rigid non-metallic material; and

(d)meets standards determined by the ESC when tested by an approved laboratory in accordance with a laboratory test approved by the ESC; and

(e)is listed in the ESC register.

34BA lighting control device, other than a voltage reduction unit, that is certified by the manufacturer as appropriate for use with the type of lamps it will be required to control.

34CA voltage reduction unit that—

(a)has an output voltage ascertained by an approved laboratory in accordance with a laboratory test approved by the ESC; and

(b)is not installed in conjunction with electronic ballasts; and

(c)is listed in the ESC register.

34DAny other lighting equipment that—

(a)is listed in the ESC register; and

(b)when installed, meets the minimum power factor determined by the ESC and specified on the ESC's Internet site; and

(c)meets standards determined by the ESC when tested by an approved laboratory in accordance with a laboratory test approved by the ESC.".

(2)In Schedule 34 to the Principal Regulations, in Part B—

(a)for "0∙963" substitute "1∙095";

(b)in Equation 1, in the definition of baseline energy consumption, for "Part J6 of the 2011 edition of the Building Code or the 2012 edition of the Building Code" substitute "Part J6 of the Building Code as amended from time to time".

(3)In Schedule 34 to the Principal Regulations, in Part B, in Equation 2—

(a)in the definition of Each Space, for "Part J6 of the 2011 edition of the Building Code" substitute "Part J6 of the Building Code as amended from time to time";

(b)in the definition of IPD, for "Table J6.2a of the 2011 edition of the Building Code" substitute "Table J6.2a of the Building Code as amended from time to time";

(c)in the definition of Asset Lifetime, after paragraph (a) insert—

"(ab)if, as part of the lighting upgrade—

(i)a lighting control device is installed in the space; and

(ii)no lighting equipment of any other type is installed in the space—

5 years; or";

(d)in the definition of Asset Lifetime, in paragraphs (b) and (c), after "Annual Operating Hours" insert ", to a maximum of 10 years";

(e)for the definition of Annual Operating Hours substitute—

"Annual Operating Hours is—

(a)if the lighting upgrade is undertaken on a road or in a public or outdoor space that is not a sports field, other than the replacement or installation of traffic signals, 4500 hours; or

(b)if traffic signals are replaced as part of the lighting upgrade, 2920 hours; or

(c)if the lighting upgrade is undertaken in a space specified in column 2 of Table 3, the number of hours specified in column 3 of that Table in respect of that space as specified in column 2 of that Table; or

(d)if the lighting upgrade is undertaken in a space that is not specified in column 2 of Table 3 but that is specified in column 2 of Table 4, the number of hours specified in column 3 of Table 4 in respect of that space as specified in column 2 of that Table; or

(e)in any other case, 1000 hours.".

(4)In Schedule 34 to the Principal Regulations, in Part B, in Equation 3—

(a)in the definition of Asset Lifetime, in paragraphs (a), (d) and (e), after "Annual Operating Hours" insert ", to a maximum of 10 years";

(b)after paragraph (a) insert—

"(ab)if, as part of the lighting upgrade—

(i)a lighting control device is installed in the space; and

(ii)no lighting equipment of any other type is installed in the space—

5 years; or";

(c)for the definition of Annual Operating Hours substitute—

"Annual Operating Hours is—

(a)if the lighting upgrade is undertaken on a road or in a public or outdoor space that is not a sports field, other than the replacement or installation of traffic signals, 4500 hours; or

(b)if traffic signals are replaced as part of the lighting upgrade, 2920 hours; or

(c)if the lighting upgrade is undertaken in a space specified in column 2 of Table 3, the number of hours specified in column 3 of that Table in respect of that space as specified in column 2 of that Table; or

(d)if the lighting upgrade is undertaken in a space that is not specified in column 2 of Table 3 but that is specified in column 2 of Table 4, the number of hours specified in column 3 of Table 4 in respect of that space as specified in column 2 of that Table; or

(e)in any other case, 1000 hours.".

(5)In Schedule 34 to the Principal Regulations, in Part B, in Equation 4—

(a)in the definition of Asset Lifetime, after paragraph (a) insert—

"(ab)if, as part of the lighting upgrade—

(i)a lighting control device is installed in the space; and

(ii)no lighting equipment of any other type is installed in the space—

5 years; or";

(b)in the definition of Asset Lifetime, in paragraph (c), after "Annual Operating Hours" insert ", to a maximum of 10 years";

(c)for the definition of Annual Operating Hours substitute—

"Annual Operating Hours is—

(a)if the lighting upgrade is undertaken on a road or in a public or outdoor space that is not a sports field, other than the replacement or installation of traffic signals, 4500 hours; or

(b)if traffic signals are replaced as part of the lighting upgrade, 2920 hours; or

(c)if the lighting upgrade is undertaken in a space specified in column 2 of Table 3, the number of hours specified in column 3 of that Table in respect of that space as specified in column 2 of that Table; or

(d)if the lighting upgrade is undertaken in a space that is not specified in column 2 of Table 3 but that is specified in column 2 of Table 4, the number of hours specified in column 3 of Table 4 in respect of that space as specified in column 2 of that Table; or

(e)in any other case, 1000 hours.".

(6)In Schedule 34 to the Principal Regulations, in Part B, in Table 2, after item 5 insert—

"6	Multiple Control Systems—where all lamps in the lighting system are connected to a programmable dimmer and manual dimmer	0∙76
7	Multiple Control Systems—any other combination of 2 or more control systems above	0∙6".

(7)In Schedule 34 to the Principal Regulations, in Part B, after Table 2 insert—

"Table 3—Operating hours for lighting upgrades undertaken in certain spaces

Column 1 Item	Column 2 Type of space	Column 3 Annual operating hours (hours per year)
1	Auditorium, church and public hall	2000
2	Board room and conference room	3000
3	Carpark—general (undercover) and carpark—entry zone (first 20 m of travel)	7000
4	Carpark—general (open air)	4500
5	Common rooms, spaces and corridors in a Class 2 building	7000
6	Courtroom	2000
7	Dormitory of a Class 3 building used for sleeping only or sleeping and study	3000

Column 1 Item	Column 2 Type of space	Column 3 Annual operating hours (hours per year)
8	Health-care—children's ward, examination room, patient ward, all patient care areas including corridors where cyanosis lamps are used	6000
9	Laboratory—artificially lit to an ambient level of 400 lx or more	3000
10	Library—stack and shelving area, reading room and general areas	3000
11	Lounge area for communal use in a Class 3 building or Class 9c aged care building	7000
12	Maintained emergency lighting	8500
13	Museum and gallery—circulation, cleaning and service lighting	2000
14	Office	3000
15	Restaurant, café, bar, hotel lounge and a space for the serving and consumption of food or drinks	5000
16	Retail space including a museum and gallery whose purpose is the sale of objects	5000
17	School—general purpose learning areas and tutorial rooms	3000
18	Sole-occupancy unit of a Class 3 building	3000
19	Sole-occupancy unit of a Class 9c aged care building	6000
20	Storage with shelving no higher than 75% of the height of the aisle lighting	5000
21	Storage with shelving higher than 75% of the height of the aisle lighting	5000
22	Wholesale storage and display area	5000

Table 4—Operating hours determined by reference to building classification under the Building Code

Column 1 Item	Column 2 Type of space	Column 3 Annual operating hours (hours per year)
1	A space in the common area of a building that is classified as Class 2 under Part 3A of the Building Code as amended from time to time	7000
2	A space in the common area of a building that is classified as Class 3 under Part 3A of the Building Code as amended from time to time	7000
3	A space in a building that is classified as Class 3 under Part 3A of the Building Code as amended from time to time (other than a space in the common area of the building)	3000
4	A space in a building that is classified as Class 5 under Part 3A of the Building Code as amended from time to time	3000
5	A space in a building that is classified as Class 6 under Part 3A of the Building Code as amended from time to time	5000
6	A space in an open air car park that is classified as Class 7a under Part 3A of the Building Code as amended from time to time	4500
7	A space in a car park (other than an open air car park) that is classified as Class 7a under Part 3A of the Building Code as amended from time to time	7000
8	A space in a building that is classified as Class 7b under Part 3A of the Building Code as amended from time to time	5000

Column 1 Item	Column 2 Type of space	Column 3 Annual operating hours (hours per year)
9	A space in a laboratory or building that is classified as Class 8 under Part 3A of the Building Code as amended from time to time and that is also classified as Division C in the Australian and New Zealand Standard Industrial Classification issued on 26 June 2013	5000
10	A space in a laboratory or building that is classified as Class 8 under Part 3A of the Building Code as amended from time to time and that is not classified as Division C in the Australian and New Zealand Standard Industrial Classification issued on 26 June 2013	3000
11	A space in a building that is classified as Class 9a under Part 3A of the Building Code as amended from time to time	6000
12	A space in a building that is classified as Class 9b under Part 3A of the Building Code as amended from time to time	2000
13	A space in a building that is classified as Class 9c under Part 3A of the Building Code as amended from time to time	6000
14	A space in a structure that is classified as Class 10b under Part 3A of the Building Code as amended from time to time	1000

".

Part 3—February 2016 amendments

17Schedule 21 amended

(1)In Schedule 21 to the Principal Regulations, in Part A, after item 21D insert—

"21EInstallation, in place of a mains voltage halogen lamp of at least 35 watts with a GU10 base, of a low energy lamp that—

(a)has a GU10 base; and

(b)meets the following requirements—

(i)the compliance requirements

for compact fluorescent lamps

set out in Table 1 of AS/NZS 4847.2:2010; or

(ii)if the ESC register indicates that different requirements are to apply to the lamp, the performance requirements specified for the lamp on the ESC's Internet site; and

(c)achieves a minimum lighting source efficacy of 48 lumens/watt; and

(d)has a minimum light output of 400 lumens in the forward direction; and

(e)has a minimum manufacturer's rated lifetime of 15 000 hours; and

(f)has a colour temperature that is, or is capable of being set to, warm white (2700K to 3500K) or cool white (3500K to 4000K); and

(g)if the lamp is to be installed in a dimmable circuit, is approved by the manufacturer as suitable for a dimmable circuit; and

(h)if the lamp is to be installed in residential premises, has a beam angle of not less than 36 degrees when determined in accordance with IEC/TR 61341 Edition 2.0; and

(i)is listed in the ESC register.".

(2)In Schedule 21 to the Principal Regulations, in Part B, after the item headed "21D Abatement factor:" insert—

"21EAbatement factor:

(a)The abatement factor for a product that achieves a minimum lighting source efficacy of 48 lumens/watt or more but less than 58 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0×56
2	20 000 or more and less than 25 000	0×74
3	25 000 or more	0×93

(b)The abatement factor for a product that achieves a minimum lighting source efficacy of 58 lumens/watt or more but less than 69 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0×58
2	20 000 or more and less than 25 000	0×78
3	25 000 or more	0×97

(c)The abatement factor for a product that achieves a minimum lighting source efficacy of 69 lumens/watt or more but less than 83 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0×60
2	20 000 or more and less than 25 000	0×80
3	25 000 or more	1×00

(d)The abatement factor for a product

that achieves a minimum lighting source efficacy of 83 lumens/watt or more but less than 100 lumens/watt

and has a manufacturer's rated

lifetime of a number of hours in the range specified, in respect of an item,

in column 2 of the following

Table is the factor shown in

column 3 of that Table in respect

of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0×62
2	20 000 or more and less than 25 000	0×82
3	25 000 or more	1×03

(e)The abatement factor for a product

that achieves a minimum lighting source efficacy of 100 lumens/watt or more and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item,

in column 2 of the following

Table is the factor shown in

column 3 of that Table in respect

of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0×63
2	20 000 or more and less than 25 000	0×84
3	25 000 or more	1×05

".

(3)In Schedule 21 to the Principal Regulations, in Part B—

(a)for "21A–21D PF multiplier:" substitute "21A–21E PF multiplier:";

(b)for "21A–21D Regional factor" substitute "21A–21E Regional factor:".

(4)In Schedule 21 to the Principal Regulations, in Part C, for "21A–21D" substitute "21A–21E".

Part 4—March 2016 amendments

18Schedule 21 amended

(1)In Schedule 21 to the Principal Regulations, in Part A, in item 21A—

(a)for paragraph (c) substitute—

"(c)  if the product is not a compact fluorescent lamp and meets the following requirements—

(i)the compliance requirements
for compact fluorescent lamps
set out in Table 1 of AS/NZS 4847.2:2010; or

(ii)if the ESC register indicates that different requirements are to apply to the product, the performance requirements specified for the product on the ESC's Internet site; and";

(b)for paragraph (g) substitute—

"(g)has a colour temperature that is, or is capable of being set to, warm white (2700K to 3500K) or cool white (3500K to 4000K); and

(h)is listed in the ESC register.".

(2)In Schedule 21 to the Principal Regulations, in Part A, in item 21B—

(a)for paragraph (b) substitute—

"(b)meets the following requirements—

(i)the compliance requirements

for compact fluorescent lamps

set out in Table 1 of AS/NZS 4847.2:2010; or

(ii)if the ESC register indicates that different requirements are to apply to the product, the performance requirements specified for the product on the ESC's Internet site; and";

(b)in paragraph (c), for "25" substitute "45";

(c)in paragraph (d), for "8000" substitute

"12 000";

(d)in paragraph (f), for "that is" substitute
"that is, or is capable of being set to,".

(3)In Schedule 21 to the Principal Regulations, in Part A, in item 21C—

(a)for paragraph (b)(i) substitute—

"(i)the compliance requirements for compact fluorescent lamps set out in Table 1 of AS/NZS 4847.2:2010 or, if the ESC register indicates that different requirements are to apply to the product, the performance requirements specified for the product on the ESC's Internet site; and";

(b)in paragraph (b)(ii), for "25"
substitute "52";

(c)in paragraph (b)(iii), for "350"
substitute "420";

(d)in paragraph (b)(iv), for "8000"
substitute "15 000";

(e)in paragraph (b)(v), for "that is"
substitute "that is, or is capable of
being set to,";

(f)for paragraph (b)(vi) substitute—

"(vi)in the case of a product installed in residential premises, has a beam angle of not less than 50 degrees when determined in accordance with IEC/TR 61341 Edition 2.0; and";

(g)after paragraph (b) insert—

"(c)is listed in the ESC register.".

(4)In Schedule 21 to the Principal Regulations, in Part A, in item 21D—

(a)in paragraph (b)—

(i)for subparagraph (i) substitute—

"(i) the compliance requirements
for compact fluorescent lamps
set out in Table 1 of AS/NZS 4847.2:2010 or, if the ESC register indicates that different requirements are to apply to the product, the performance requirements specified for the product on the ESC's Internet site; and";

(ii)in subparagraph (ii), for "40"
substitute "48";

(iii)in subparagraph (iii), for "350" substitute "400";

(iv)in subparagraph (iv), for "8000" substitute "15 000";

(v)in subparagraph (v), for "that is" substitute "that is, or is capable of being set to,";

(vi)for subparagraph (vi) substitute—

"(vi)in the case of a product installed in residential premises, has a beam angle of not less than 40 degrees when determined in accordance with IEC/TR 61341 Edition 2.0; and";

(b)after paragraph (b) insert—

"(c)is listed in the ESC register.".

(5)In Schedule 21 to the Principal Regulations, in Part B, in the item headed "21A Abatement factor:"—

(a)for the Table in paragraph (a) substitute—

"

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	8000 or more and less than 10 000	0∙20
2	10 000 or more and less than 12 000	0∙25
3	12 000 or more and less than 15 000	0∙30
4	15 000 or more and less than 20 000	0∙37
5	20 000 or more and less than 25 000	0∙50
6	25 000 or more	0∙62

";

(b)for the Table in paragraph (b) substitute—

"

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	8000 or more and less than 10 000	0∙22
2	10 000 or more and less than 12 000	0∙27
3	12 000 or more and less than 15 000	0∙33
4	15 000 or more and less than 20 000	0∙41
5	20 000 or more and less than 25 000	0∙55
6	25 000 or more	0∙68

";

(c) for the Table in paragraph (c) substitute—

"

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	8000 or more and less than 10 000	0∙23
2	10 000 or more and less than 12 000	0∙29
3	12 000 or more and less than 15 000	0∙34
4	15 000 or more and less than 20 000	0∙43
5	20 000 or more and less than 25 000	0∙57
6	25 000 or more	0∙72

";

(d)after paragraph (c) insert—

"(d)The abatement factor for a product that achieves a minimum lighting source efficacy of—

(i)69 lumens/watt where light output is less than 350 lumens; or

(ii)78 lumens/watt where light output is 350 lumens or more and less than 650 lumens; or

(iii)90 lumens/watt where light output is 650 lumens or more and less than 850 lumens; or

(iv)95 lumens/watt where light output is 850 lumens or more—

and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	8000 or more and less than 10 000	0∙24
2	10 000 or more and less than 12 000	0∙30
3	12 000 or more and less than 15 000	0∙36
4	15 000 or more and less than 20 000	0∙45
5	20 000 or more and less than 25 000	0∙60
6	25 000 or more	0∙75

".

(6)In Schedule 21 to the Principal Regulations, in Part B, for the items headed "21B Abatement factor:", "21C Abatement factor:" and "21D Abatement factor:" substitute—

"21BAbatement factor:

(a)The abatement factor for a product that achieves a minimum lighting source efficacy of 45 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	12 000 or more and less than 15 000	0∙40
2	15 000 or more and less than 20 000	0∙50
3	20 000 or more and less than 25 000	0∙67
4	25 000 or more	0∙83

(b)The abatement factor for a product that achieves a minimum lighting source efficacy of 54 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	12 000 or more and less than 15 000	0∙41
2	15 000 or more and less than 20 000	0∙51
3	20 000 or more and less than 25 000	0∙68
4	25 000 or more	0∙85

(c)The abatement factor for a product that achieves a minimum lighting source efficacy of 65 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	12 000 or more and less than 15 000	0∙42
2	15 000 or more and less than 20 000	0∙52
3	20 000 or more and less than 25 000	0∙70
4	25 000 or more	0∙87

(d)The abatement factor for a product that achieves a minimum lighting source efficacy of 78 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	12 000 or more and less than 15 000	0∙42
2	15 000 or more and less than 20 000	0∙53
3	20 000 or more and less than 25 000	0∙71
4	25 000 or more	0∙88

21C Abatement factor:

(a)The abatement factor for a product that achieves a minimum lighting source efficacy of 52 lumens/watt or more but less than 62 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙44
2	20 000 or more and less than 25 000	0∙59
3	25 000 or more	0∙74

(b)The abatement factor for a product that achieves a minimum lighting source efficacy of 62 lumens/watt or more but less than 75 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙47
2	20 000 or more and less than 25 000	0∙63
3	25 000 or more	0∙78

(c)The abatement factor for a product that achieves a minimum lighting source efficacy of 75 lumens/watt or more but less than 90 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙49
2	20 000 or more and less than 25 000	0∙66
3	25 000 or more	0∙82

(d)The abatement factor for a product that achieves a minimum lighting source efficacy of 90 lumens/watt or more and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙51
2	20 000 or more and less than 25 000	0∙68
3	25 000 or more	0∙85

21DAbatement factor:

(a)The abatement factor for a product that achieves a minimum lighting source efficacy of 48 lumens/watt or more but less than 58 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙46
2	20 000 or more and less than 25 000	0∙61
3	25 000 or more	0∙76

(b)The abatement factor for a product that achieves a minimum lighting source efficacy of 58 lumens/watt or more but less than 69 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙48
2	20 000 or more and less than 25 000	0∙64
3	25 000 or more	0∙80

(c)The abatement factor for a product that achieves a minimum lighting source efficacy of 69 lumens/watt or more but less than 83 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙50
2	20 000 or more and less than 25 000	0∙67
3	25 000 or more	0∙83

(d)The abatement factor for a product that achieves a minimum lighting source efficacy of 83 lumens/watt or more but less than 100 lumens/watt and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙52
2	20 000 or more and less than 25 000	0∙69
3	25 000 or more	0∙86

(e)The abatement factor for a product that achieves a minimum lighting source efficacy of 100 lumens/watt or more and has a manufacturer's rated lifetime of a number of hours in the range specified, in respect of an item, in column 2 of the following Table is the factor shown in column 3 of that Table in respect of that item.

Column 1 Item	Column 2 Hours	Column 3 Abatement factor
1	15 000 or more and less than 20 000	0∙53
2	20 000 or more and less than 25 000	0∙71
3	25 000 or more	0∙88

".

══════════════

Endnotes

[1] Reg. 4: S.R. No. 158/2008. Reprint No. 1 as at 19 April 2013. Reprinted to S.R. No. 24/2013. Subsequently amended by S.R. Nos 24/2013, 96/2013 and 74/2014.

——

Table of Applied, Adopted or Incorporated Matter

The following table of applied, adopted or incorporated matter is included in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.

In this table, Principal Regulations means the Victorian Energy Efficiency Target Regulations 2008.

Statutory rule provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 5 which inserts a definition of three-phase cage induction motor in regulation 4 of the Principal Regulations	Australian/New Zealand Standard 1359.5:2004 Rotating electrical machines—General requirements Part 5: Three-phase cage induction motors—High efficiency and minimum energy performance standards requirements, 2nd edition, published by Standards Australia and Standards New Zealand on 6 September 2004.	The whole

Statutory rule provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 9 which amends Schedule 7 to the Principal Regulations, regulation 10 which amends Schedule 8 to the Principal Regulations, and regulation 12 which amends Schedule 10 to the Principal Regulations	Australian/New Zealand Standard 3823.2:2013 Performance of electrical appliances—Air conditioners and heat pumps Part 2: Energy labelling and minimum energy performance standards (MEPS) requirements, 8th edition, published by Standards Australia and Standards New Zealand on 23 May 2013	The whole
Regulation 9 which amends Schedule 7 to the Principal Regulations, regulation 10 which amends Schedule 8 to the Principal Regulations, and regulation 12 which amends Schedule 10 to the Principal Regulations	Australian/New Zealand Standard 3823.1.2:2012 Performance of electrical appliances—Airconditioners and heat pumps Part 1.2: Ducted airconditioners and air-to-air heat pumps—Testing and rating for performance (ISO 13253:2011, MOD), 2nd edition, published by Standards Australia and Standards New Zealand on 11 May 2012	The whole

Statutory rule provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 12 which amends Schedule 10 to the Principal Regulations	Australian/New Zealand Standard 3823.1.1:2012 Performance of electrical appliances—Airconditioners and heat pumps Part 1.1: Non-ducted airconditioners and heat pumps—Testing and rating for performance (ISO 5151:2010, MOD), 2nd edition, published by Standards Australia and Standards New Zealand on 11 May 2012	The whole
Regulation 13 which amends Schedule 31 to the Principal Regulations	Australian Standard 60034.1—2009 Rotating electrical machines Part 1: Rating and performance (IEC 60034-1, Ed. 11(2004) MOD), published by Standards Australia on 15 July 2009	The whole
Regulation 13 which amends Schedule 31 to the Principal Regulations	International Electrotechnical Commission Technical Specification 60034-31 Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide, published by the International Electrotechnical Commission on 26 April 2010	The whole

Statutory rule provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 13 which amends Schedule 31 to the Principal Regulations	International Electrotechnical Commission International Standard 60034-2-1 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles), published by the International Electrotechnical Commission on 10 September 2007	The whole
Regulation 14 which amends Schedule 32 to the Principal Regulations	Australian Standard 1731.14—2003 Refrigerated display cabinets Part 14: Minimum energy performance standard (MEPS) requirements, published by Standards Australia on 1 October 2003 and reissued December 2005 incorporating Amendment No. 1 and July 2012 incorporating Amendment No. 2	The whole
Regulation 14 which amends Schedule 32 to the Principal Regulations	Australian Standard 1731.9—2003 Refrigerated display cabinets Part 9: Electrical energy consumption test, 2nd edition, published by Standards Australia on 1 October 2003 and reissued December 2005 incorporating Amendment No. 1	The whole

Statutory rule provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 14 which amends Schedule 32 to the Principal Regulations	Australian Standard 1731.12—2003 Refrigerated display cabinets Part 12: Measurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet, 2nd edition, published by Standards Australia on 1 October 2003 and reissued December 2005 incorporating Amendment No. 1	The whole
Regulation 16 which amends Schedule 34 to the Principal Regulations	The Building Code of Australia comprising— (a)  Volume One of the Australian Building Codes Board Series including any variations or additions in the Appendix Victoria set out in the Appendices to that Volume; and (b)  Volume Two of the Australian Building Codes Board Series including any Victorian additions set out in Appendix A of that Volume	Part A3 and Part J6

Statutory rule provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 17 which amends Schedule 21 to the Principal Regulations	Australian//New Zealand Standard 4847.2:2010 Self ballasted lamps for general lighting services Part 2: Minimum Energy Performance Standards (MEPS) requirements, 2nd Edition published by Standards Australia and Standards New Zealand on 21 May 2010 and reissued December 2011 incorporating Amendment No. 1	The whole
Regulation 17 which amends Schedule 21 to the Principal Regulations	International Electrotechnical Commission Technical Report 61341 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps, Edition 2.0, published by the International Electrotechnical Commission on 18 February 2010	The whole
Regulation 18 which amends Schedule 21 to the Principal Regulations	Australian/New Zealand Standard 4847.2:2010 Self ballasted lamps for general lighting services Part 2: Minimum Energy Performance Standards (MEPS) requirements, 2nd Edition published by Standards Australia and Standards New Zealand on 21 May 2010 and reissued December 2011 incorporating Amendment No. 1	The whole

Statutory rule provision	Title of applied, adopted or incorporated document	Matter in applied, adopted or incorporated document
Regulation 18 which amends Schedule 21 to the Principal Regulations	International Electrotechnical Commission Technical Report 61341 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps, Edition 2.0, published by the International Electrotechnical Commission on 18 February 2010	The whole