Untitled document
EastLink Project Amendment Regulations 2016
S.R. No. 36/2016
TABLE OF PROVISIONS
Regulation Page
1Objective
2Authorising provision
3Definitions
═══════════════
Endnotes
STATUTORY RULES 2016
S.R. No. 36/2016
EastLink Project Act 2004
EastLink Project Amendment Regulations 2016
The Governor in Council makes the following Regulations:
Dated: 26 April 2016
Responsible Minister:
LUKE DONNELLAN
Minister for Roads and Road SafetyANDREW ROBINSON
Clerk of the Executive Council
1Objective
The objective of these Regulations is to amend the EastLink Project Regulations 2008—
(a)to prescribe additional tolling devices; and
(b)to amend the definition of testing officer.
2Authorising provision
These Regulations are made under section 258 of the EastLink Project Act 2004.
3Definitions
(1)In regulation 3 of the EastLink Project Regulations 2008[1], in the definition of digital toll camera unit—
(a)after "means" insert "the following devices";
(b)in paragraph (a) omit "and";
(c)after paragraph (b) insert—
"(c)the device known as the Vehicle Registration Sensor: Kapsch Part Number 8633 004-262B;
(d)the device known as the Vehicle Registration Sensor: Kapsch Part Number 340 333-400-00;
(e)the device known as the Vehicle Registration Sensor: Kapsch Part Number VRX-2400-LPI;
(f)the device known as the Vehicle Registration Sensor Controller: Kapsch Part Number 8633 005-028;".
(2)In regulation 3 of the EastLink Project Regulations 2008, in the definition of testing officer, for paragraph (c) substitute—
"(c)a testing officer of a testing facility accredited by the National Association of Testing Authorities, Australia
ACN 004 379 748 (NATA); or".
═══════════════
ENDNOTES
[1] Reg. 3(1): S.R. No. 81/2008 as amended by S.R. Nos 104/2013 and 167/2014.
0
0
0