Trade Measurement Amendment Regulations (No. 2) 2010 (WA)

2768 GOVERNMENT GAZETTE, WA 22 June 2010

CE301*

Trade Measurement Act 2006

Trade Measurement Administration Act 2006

Trade Measurement Amendment Regulations

(No. 2) 2010

Made by the Governor in Executive Council.

1.            Citation

These regulations are the Trade Measurement Amendment Regulations (No. 2) 2010.
2.	Commencement These regulations come into operation as follows —

(a)	regulations 1 and 2— on the day on which these regulations are published in the Gazette;
(b)	the rest of the regulations — on the day after that day.

3.            Regulations amended

These regulations amend the Trade Measurement
Regulations 2007.

(1)	This regulation applies on and after 1 July 2010.
(2)	For the purposes of the principal Act section 9, a person is exempt from a provision of the principal Act
(State provision) if the person complies with the

4.            Regulation 3 amended

In regulation 3 insert in alphabetical order:

principal Act means the Trade Measurement Act 2006;

5.            Regulation 5A inserted

At the end of Part I insert:

5A. Exemptions from the principal Act

22 June 2010 GOVERNMENT GAZETTE, WA 2769

provision of the National Measurement Act that most

closely corresponds to the State provision.

By Command of the Governor,

PETER CONRAN, Clerk of the Executive Council.