Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — As/ACIF S002) Amendment 2004 (No. 2) (Cth)

Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2004 (No. 2)

The AUSTRALIAN COMMUNICATIONS AUTHORITY makes this Technical Standard under subsection 376 (1) of the Telecommunications Act 1997.

Dated 15 December 2004

R HORTON
Chair

A HORSLEY
Deputy Chair

Australian Communications Authority

1. Name of Technical Standard

(1)This Technical Standard is the Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2004 (No. 2).

(2)This Technical Standard may also be cited as AS/ACIF S002-2001 (Amdt 2).

1. Commencement

This Technical Standard commences on the date of its notification in the Gazette.

1. Amendment of Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001

Schedule 1 amends the Telecommunications Technical Standard (Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001, as amended by AS/ACIF S002-2001 (Amdt 1).

Schedule 1          Amendments

(section 3)

[1]          Section 5, after definition of AS/ACIF S002-2001 (Amdt No. 1/2002)

insert

AS/ACIF S002-2001 (Amdt No. 2/2004) means the amendment of the Australian Communications Industry Forum/Australian Standard: Analogue interworking and non-interference Requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002:2001, as published by the Australian Communications Industry Forum and Standards Australia International Limited in July 2004.

1. Section 7

substitute

1. Standards with which customer equipment must comply

Customer equipment to which this Technical Standard applies must comply with the AS/ACIF Standard, as amended by:

(a)AS/ACIF S002-2001 (Amdt No. 1/2002); and

(b)AS/ACIF S002-2001 (Amdt No. 2/2004).