Telecommunications Labelling (Customer Equipment and Customer Cabling) Amendment Notice 2007 (No. 1) (Cth)

Telecommunications Labelling (Customer Equipment and Customer Cabling) Amendment Notice  2007 (No. 1)

Telecommunications Act 1997

The AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY makes this Notice under section 407 of the Telecommunications Act 1997.

Dated  24^th August 2007

Chris Chapman

[signed]
Chairman

Lyn Maddock
[signed]
Deputy Chair

Australian Communications and Media Authority

1. Name of Notice

This Notice is the Telecommunications Labelling (Customer Equipment and Customer Cabling) Amendment Notice  2007 (No. 1).

1. Commencement

This Notice commences on the day after it is registered.

1. Amendment of Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001

Schedule 1 amends the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.

Schedule 1        Amendments

(section 3)

[1]           Before section 1.1

insert in Part 1

Simplified outline of Part 1

• Customer equipment is equipment that is used, or intended for use, on the customer side of the boundary of a telecommunications network.

• Customer cabling is a line that is used, or intended for use, on the customer side of the boundary of a telecommunications network.

• This Part defines general terms and acronyms used in this Notice, including the meaning and description of compliance records and items.

• This Notice applies to manufacturers, importers and their authorised agents of telecommunications customer equipment and customer cabling.

• If there is inconsistency between applicable standards, the supplier must choose which applicable standard to use and must prepare a statement including inconsistencies.

• Suppliers may comply with replacement standards before the expiry of older standards.

[2]           Subsection 1.4 (1), definition of applicable standard

substitute

applicable standard, for an item that is mentioned in column 2 of the tables in Part 2 of Schedule 1, means:

(a)    a standard that:

(i)    is mentioned in column 3 of the tables in that Part; and

(ii)    applies to the item; or

(b)    if a part only of a standard that is mentioned in column 3 of the tables in Part 2 of Schedule 1 applies to the item, that part of the standard; or

(c)    if a standard mentioned in column 3 of the tables in Part 2 has been amended, and subsection 6.1 (3) does not apply to the item, the standard as amended;

and includes a standard that has been revoked.

[3]           Subsection 1.4 (1), definition of Telecom Authorisation

substitute

Telecom Authorisation means an authorisation of the type described in section 126 of the Telecommunications Act 1989 immediately before the repeal of that Act.

[4]           After section 1.4

insert

1.4A        Acronyms

In this Notice, a reference to an acronym mentioned in column 1 of the following table is a reference to the term mentioned in column 2 of the table.

Column 1 Acronym	Column 2 Term
AMPS	advanced mobile phone system
ASA	Air Services Australia
AS/ACIF	Australian Standard/Australian Communications Industry Forum
BRA	basic rate access
CAS	channel associated signalling
CC	customer cabling
CDMA	code division multiple access
CE	customer equipment
CT2	cordless telephone second generation
DECT	digital enhanced cordless telecommunications
ETSI	European Telecommunications Standards Institute
GSM	global system for mobile communications
HFC	hybrid fibre cable
ISDN	integrated services digital network
LIU	line isolating unit
LMB	large mega bit bearer
PHS	personal handyphone system
PMTS	public mobile telecommunications service
PRA	primary rate access
PSTN	public switched telephone network
STS	standard telephone service

[5]           Subsection 1.5 (1), at the foot

insert

Note Section 25 of the Acts Interpretation Act 1901 defines document to include:

(a)   any paper or other material on which there is writing; and

(b)   any paper or other material on which there are marks, figures, symbols or perforations having a meaning for persons qualified to interpret them; and

(c)   any article or material from which sounds, images or writings are capable of being reproduced with or without the aid of any other article or device.

[6]           Subsection 1.5 (5), note

omit

[7]           Paragraph 1.8 (1) (a)

omit

in column 5;

insert

in column 3 of Table 1.1 in Schedule 1;

[8]           Subsection 1.8 (1), note 1

omit

subsection 1 (3)

insert

subclause 1 (3)

[9]           Before section 2.1

insert in Part 2

Simplified outline of Part 2

• This Part specifies the kind of items to which this Notice applies (only those items listed in Schedule 1 are subject to the telecommunications regulatory arrangements).

[10]         Paragraph 2.1 (a)

substitute

(a)    that is mentioned in column 2 of the tables in Part 2 of Schedule 1; and

[11]         Before section 2A.1

insert in Part 2A

Simplified outline of Part 2A

• Some items are exempt items and may be exempt from compliance labeling but not from the requirement to meet applicable standards or, for the suppliers of those items, the requirement to maintain compliance records.

• Suppliers must give ACMA notice of intention not to label certain exempt items.

• A supplier must maintain a publicly available register of all exempt items on the internet. This Part specifies the form and information content of the register.

[12]         Paragraph 2A.1 (b)

omit

under section 420 of the Act,

[13]         Before section 3.1

insert in Part 3

Simplified outline of Part 3

• Compliance labels must have certain characteristics (information required, durability, size and position on the item). The compliance mark is set out in Schedule 3.

• A compliance label may, in certain circumstances, be placed on the packaging of an item. This Part specifies requirements for the characteristics of such a label.

• Non‑compliant items are required to be labelled with a non‑compliance label, and statements about non‑compliance must be printed on the external surface of the packaging and incorporated into documentation supplied.

• Customer cabling and associated cabling equipment must also be marked with particular information.

• Equipment which may be installed or operated in a non‑compliant manner must be supplied with documentation to avoid such non‑compliance.

[14]         Subsection 3.1 (1)

omit

If:

insert

Subject to Part 2A, if:

[15]         Subsection 3.2 (1)

omit

If

insert

Subject to Part 2A, if

[16]         Before section 4.1

insert in Division 4.1

Simplified outline of Part 4

• Before applying a compliance label to an item, a supplier must obtain permission from ACMA to use a regulatory mark and for the issue of a supplier code number.

• Suppliers must meet the requirements (including keeping compliance records) of the compliance level for an applicable standard that is selected for an item.

• There are additional requirements imposed on suppliers of modified items, disability customer equipment and customer equipment used in the supply of public mobile telecommunications service.

[17]         Subsection 4.3 (2)

omit

category,

insert

category in a table in Part 2 of Schedule 1,

[18]         Paragraph 4.6 (2) (a)

omit

a test report

insert

an endorsed test report

[19]         Subparagraph 4.6 (2) (d) (i)

omit

a test report

insert

an endorsed test report

[20]         Subparagraph 4.6 (2) (e) (i)

omit

a test report

insert

an endorsed test report

[21]         Subparagraph 4.6 (2) (f) (i)

omit

a test report

insert

an endorsed test report

[22]         Subparagraph 4.6 (2) (g) (i)

omit

a test report

insert

an endorsed test report

[23]         Before section 5.1

insert in Part 5

Simplified outline of Part 5

• Suppliers must keep compliance records for certain items.

• Suppliers must make compliance records available for inspection by ACMA or an authorised officer within prescribed timeframes.

• Authorised officers may require a supplier to provide items to a recognised testing authority for testing.

• An authorised officer may require a supplier to produce additional test reports or certification body statements for an item within the prescribed timeframe.

[24]         Paragraph 5.6 (1) (a)

omit

a test report

insert

an endorsed test report

[25]         Before section 6.1

insert in Part 6

Simplified outline of Part 6

• Arrangements exist so that equipment may continue to be supplied following a change to an applicable standard, such as a new or amended standard or a change to a compliance level.

[26]         Before section 7.1

insert in Part 7

Simplified outline of Part 7

Transitional arrangements regarding labeling apply to:

• items manufactured or imported before 1 July 1997 that meet the requirements of TS001‑1993; and

• items manufactured or imported after 30 June 2001 to which sections 8 and 9 of ACA TS102‑1998 apply.

[27]         Schedule 1, Part 1, heading

substitute

Part 1          Applicable standards

[28]         Schedule 1, Part 1, subclause 1 (1)

omit

the table in this Part

insert

Table 1.1

[29]         Schedule 1, Part 1, subclause 1 (1A), including the note

omit

[30]         Schedule 1, Part 1, subclause 1 (2)

omit

the table in this Part

insert

Table 1.1

[31]         Schedule 1, Part 1, subclause 1 (2A), including the note

substitute

(2A)   A reference to ‘Amdt #’ in the title of a technical standard indicates that the technical standard amends another technical standard.

Note   The reference to ‘Amdt’ is followed by the amendment number of the amendment. For example, ‘(Amdt 1)’.

(2B)   A reference in Table 1.1 to a revoked standard is a reference to that standard as in force immediately before the standard was revoked.

[32]         Schedule 1, Part 1, subclauses 1 (3) and (4)

omit

column 5 of the table in Part 2

insert

column 3 of Table 1.1

[33]         Schedule 1, Part 1, clause 1, table

substitute

Table 1.1

Column 1 Citation of standard	Column 2 Title of standard	Column 3 Start/Amendment/Expiry date and Replacement standard (note 19)	Column 4 Notes
ACA TS001	ACA TS001‑1997 Telecommunications Technical Standard (Safety Requirements for Customer Equipment — ACA TS001–1997)	4/12/1997 – 1/7/2004 Replaced by AS/NZS 60950‑2000	5, 11, 17
ACA TS002	ACA TS002‑1997 Telecommunications Technical Standard (Analogue Interworking and Non‑interference Requirements — ACA TS002–1997)	4/12/1994 – 1/1/2003 Replaced by AS/ACIF S002‑2001	2, 10
ACA TS003	ACA TS003‑1997 Telecommunications Technical Standard (Customer Switching Systems Connected to the PSTN — ACA TS003–1997)	4/12/1997 – 1/9/2003 Replaced by AS/ACIF S003‑2001	2, 3
ACA TS004	ACA TS004‑1997 Telecommunications Technical Standard (Voice Frequency Performance Requirements for Customer Equipment — ACA TS004–1997)	10/12/1997 – 1/9/2003 Replaced by AS/ACIF S004‑2001	2
ACA TS005	ACA TS005‑1997 Telecommunications Technical Standard (Mobile Station for AMPS Analogue Cellular Mobile Telecommunications System — ACA TS005–1997)	10/12/1997 ‑	14
ACA TS007	ACA TS007‑1997 Telecommunications Technical Standard (General Requirements for Customer Equipment Connected to the Telex Network — ACA TS007–1997)	10/12/1997 ‑
ACA TS008	ACA TS008‑1997 Telecommunications Technical Standard (Requirements for Authorised Cabling Products — ACA TS008–1997)	10/12/1997 – 1/1/2004 Replaced by AS/ACIF S008‑2001	13
ACA TS014	ACA TS014‑1997 Telecommunications Technical Standard (General Requirements for Customer Equipment Connected to an ISDN Primary Rate Interface — ACA TS014–1997)	10/12/1997 ‑
ACA TS015	ACA TS015‑1997 Telecommunications Technical Standard (General Requirements for Analogue Video Customer Equipment Connected to a Telecommunications Network — ACA TS015–1997)	10/12/1997 ‑
ACA TS016	ACA TS016‑1997 Telecommunications Technical Standard (General Requirements for Customer Equipment Connected to Hierarchical Digital Interfaces — ACA TS016–1997)	10/12/1997 – 1/1/2004 Replaced by AS/ACIF S016‑2001	5
ACA TS018	ACA TS018‑1997 Telecommunications Technical Standard (GSM Customer Equipment — ACA TS018–1997)	4/12/1997 – 1/7/2008 Replaced by AS/ACIF S042.3‑2005	8, 15
ACA TS019	ACA TS019‑1997 Telecommunications Technical Standard (Customer Equipment for use with CT2 CA1 Cordless Telecommunications Systems — ACA TS019–1997)	10/12/1997 – 1/3/2008
ACA TS022	ACA TS022‑1997 Telecommunications Technical Standard (MobileSat Terminal Compatibility Requirements for System Access — ACA TS022–1997)	10/12/1997 ‑	16
ACA TS024	ACA TS024‑1997 Telecommunications Technical Standard (Broadcaster Interface Standard — ACA TS024–1997)	10/12/1997 ‑
ACA TS025	ACA TS025‑1997 Telecommunications Technical Standard (Line Isolation Devices — ACA TS025–1997)	4/12/1997 ‑
ACA TS028	ACA TS028‑1997 Telecommunications Technical Standard (Radio Equipment and Systems for DECT — ACA TS028–1997)	10/12/1997 – 1/3/2008 Replaced by standards under the radiocommunications arrangements
ACA TS031	ACA TS031‑1997 Telecommunications Technical Standard (Requirements for ISDN Basic Access Interface — ACA TS031–1997)	10/12/1997 – 1/9/2003 Replaced by AS/ACIF S031‑2001	4
ACA TS034	ACA TS034‑1997 Telecommunications Technical Standard (Personal Handy Phone System — ACA TS034–1997)	4/12/1997 – 1/3/2008 Replaced by standards under the radiocommunications arrangements
	ACA TS034‑1997 (Amdt 1) Telecommunications Technical Standard (Personal Handy Phone System — ACA TS034–1997) Amendment 2001 (No. 1)	5/9/2001 – 1/3/2008 Replaced by standards under the radiocommunications arrangements
ACA TS038	ACA TS038‑1997 Telecommunications Technical Standard (Requirements for ISDN Primary Rate Access Interface — ACA TS038–1997)	10/12/1997 – 1/9/2003 Replaced by AS/ACIF S038‑2001	4
ACA TS102	ACA TS102‑1998 Telecommunications Technical Standard (Customer Equipment and Customer Cabling — ACA TS102–1998)	11/12/1998 ‑
	ACA TS102 (Amdt 1) Telecommunications Technical Standard (Customer Equipment and Customer Cabling) – ACA TS102‑1998 Amendment Standard 2001 (No. 1)	19/6/2001 ‑
AS/ACIF S002	AS/ACIF S002‑2001 Telecommunications Technical Standard (Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001	18/4/2001 – 1/10/2006 Replaced by AS/ACIF S002‑2005	2
	AS/ACIF S002‑2001 (Amdt 1) Telecommunications Technical Standard (Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2004 (No. 1)	15/3/2002 – 1/10/2006 Replaced by AS/ACIF S002‑2005	2, 26
	AS/ACIF S002‑2001 (Amdt 2) Telecommunications Technical Standard (Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2004 (No. 2)	20/12/2004 – 1/10/2006 Replaced by AS/ACIF S002‑2005	2
	AS/ACIF S002‑2005 Telecommunications Technical Standard (Analogue Interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002:2005) 2005	5/4/2006 ‑	2
AS/ACIF S003	AS/ACIF S003‑2001 Telecommunications Technical Standard (Customer Switching, Multiplexing, and Ancillary Equipment for Connection to a Telecommunications Network — AS/ACIF S003) 2001	12/9/2001 – 30/6/2005 Replaced by AS/ACIF S003‑2005	2, 3
	AS/ACIF S003‑2005 Telecommunications Technical Standard (Customer Access Equipment for Connection to a Telecommunications Network — AS/ACIF S003:2005) 2005	1/6/2005 – 1/11/2008 Replaced by AS/ACIF S003‑2006	2, 3
	AS/ACIF S003‑2006 Telecommunications Technical Standard (Customer Access Equipment for connection to a Telecommunications Network — AS/ACIF S003:2006) 2006	23/11/2006 ‑	3
AS/ACIF S004	AS/ACIF S004‑2001 Telecommunications Technical Standard (Voice Frequency Performance Requirements for Customer Equipment — AS/ACIF S004) 2001	12/9/2001 – 1/10/2006 Replaced by AS/ACIF S004‑2004	2
	AS/ACIF S004‑2004 Telecommunications Technical Standard (Voice Frequency Performance Requirements for Customer Equipment — AS/ACIF S004) 2004	20/12/2004 – 1/11/2008 Replaced by AS/ACIF S004‑2006	2
	AS/ACIF S004‑2006 Telecommunications Technical Standard (Voice frequency performance requirements for Customer Equipment — AS/ACIF S004:2006) 2006	23/11/2006 ‑
AS/ACIF S006	AS/ACIF S006‑2001 Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non‑switched Telecommunications Network — AS/ACIF S006) 2001	18/4/2001 ‑
AS/ACIF S008	AS/ACIF S008‑2001 Telecommunications (Requirements for Authorised Cabling Products — AS/ACIF S008) Technical Standard 2001	24/12/2001 – 1/7/2008 Replaced by AS/ACIF S008‑2006
	AS/ACIF S008‑2001 (Amdt 1) Telecommunications (Requirements for Authorised Cabling Products — AS/ACIF S008:2001) Amendment Technical Standard (No. 1)	19/3/2002 – 1/7/2008 Replaced by AS/ACIF S008‑2006
	AS/ACIF S008‑2006 Telecommunications Technical Standard (Requirements for customer cabling products — AS/ACIF S008:2006) 2006	28/6/2006 ‑
AS/ACIF S016	AS/ACIF S016‑2001 Telecommunications Technical Standard (Requirements for Customer Equipment with hierarchical digital interfaces — AS/ACIF S016) 2002	13/3/2002 ‑	5
AS/ACIF S031	AS/ACIF S031‑2001 Telecommunications Technical Standard (Requirements for ISDN Basic Access Interface — AS/ACIF S031) 2001	12/9/2001 ‑	4
AS/ACIF S038	AS/ACIF S038‑2001 Telecommunications Technical Standard (Requirements for ISDN Primary Rate Access Interface — AS/ACIF S038) 2001	12/9/2001 ‑	4
AS/ACIF S041	AS/ACIF S041‑2005 Telecommunications Technical Standard (Requirement for DSL Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S041:2005) 2005	5/4/2006 ‑
AS/ACIF S042	AS/ACIF S042.1‑1999 Telecommunications Technical Standard (Requirements for connection to an air interface of a Telecommunications Network — Part 1: General — AS/ACIF S042.1:1999) 2006	28/6/2006 – 1/7/2008 Replaced by AS/ACIF S042.1‑2006
	AS/ACIF S042.1‑2006 Telecommunications Technical Standard (Requirements for connection to an air interface of a Telecommunications Network‑Part 1: General — AS/ACIF S042.1:2006) 2006	28/6/2006 ‑	27
	AS/ACIF S042.2‑1999 Telecommunications Technical Standard (Requirements for connection to an air interface of a Telecommunications Network — Part 2: CDMA (IS‑95) — AS/ACIF S042.2:1999) 2006	28/6/2006 ‑
	AS/ACIF S042.3‑2005 Telecommunications Technical Standard (Requirements for connection to an air interface of a Telecommunications Network — Part 3: GSM Customer Equipment — AS/ACIF S042.3:2005) 2005	5/4/2006 ‑	8 (b)
AS/ACIF S043	AS/ACIF S043.1‑2003 Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 1: General — AS/ACIF S043.1:2003) 2003	26/11/2003 ‑
	AS/ACIF S043.2‑2003 Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 2: Broadband — AS/ACIF S043.2:2003) 2003	26/11/2003 – 30/6/2005 Replaced by AS/ACIF S043.2‑2005
	AS/ACIF S043.2‑2005 Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 2: Broadband — AS/ACIF S043.2:2005) 2005	1/6/2005 – 1/11/2008 Replaced by AS/ACIF S043.2‑2006
	AS/ACIF S043.2‑2006 Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 2: Broadband AS/ACIF S043.2:2006) 2006	23/11/2006 ‑
	AS/ACIF S043.3‑2001 Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 3: DC, low frequency AC and voiceband — AS/ACIF S043.3:2001) 2003	26/11/2003 ‑
AS/NZS 4117	AS/NZS 4117‑1999 Telecommunications Technical Standard (Surge Protective Devices for Telecommunications Applications — AS/NZS 4117:1999) 2003	26/11/2003 ‑
AS/NZS 60950	AS/NZS 60950‑2000 Telecommunications Technical Standard (Safety of Information Technology Equipment — AS/NZS 60950:2000) 2003	26/11/2003 – 31/12/2006 Replaced by AS/NZS 60950‑2000 (Incorporating Amendment No. 1) and AS/NZS 60950.1‑2003	5
	AS/NZS 60950‑2000 (Incorporating Amendment No. 1) Telecommunications Technical Standard (Safety of Information Technology Equipment — AS/NZS 60950:2000 (Incorporating Amendment No. 1)) 2005	5/4/2006 – 31/12/2006 Replaced by AS/NZS 60950.1‑2003	5
	AS/NZS 60950.1‑2003 Telecommunications Technical Standard (Information Technology Equipment — Safety, Part 1: General requirements — AS/NZS 60950.1:2003) 2005	5/4/2006 –	5

[34]         Schedule 1, Part 1, clause 2

omit

[35]         Schedule 1, Part 2, Category A, table

substitute

Table 1.2

Column 1 Category (note 1)	Column 2 Item	Column 3 Technical standard	Column 4 Compliance level	Column 5 Notes
A1	CE designed to connect to PSTN — analog for voice	AS/NZS 60950	3
		AS/ACIF S002	3	2, 22, 26
		AS/ACIF S004	3	2
A2	CE designed to connect to PSTN — analog for data	AS/NZS 60950	3
		AS/ACIF S002	3	2, 22, 26
A3	CE designed to connect to PSTN — digital channel associated signalling (CAS) for voice operation	AS/NZS 60950	3
		AS/ACIF S003	2	2, 3
		AS/ACIF S004	3	2
		AS/ACIF S016	3
A4	CE designed to connect to PSTN — digital CAS interface for data only	AS/NZS 60950	3
		AS/ACIF S003	2	2, 3
		AS/ACIF S016	3
A7	CE designed to connect to ISDN — TS014 PRA incorporating voice	AS/NZS 60950	3
		AS/ACIF S004	3	2
		ACA TS014	3
		AS/ACIF S016	3
A8	CE designed to connect to ISDN — TS014 PRA for data	AS/NZS 60950	3
		ACA TS014	3
		AS/ACIF S016	3
A9	CE designed to connect to ISDN — BRA incorporating voice	AS/NZS 60950	3
		AS/ACIF S004	3	2
		AS/ACIF S031	3/2	4
A10	CE designed to connect to ISDN — BRA for data	AS/NZS 60950	3
		AS/ACIF S031	3/2	4
A11	CE designed to connect to ISDN — ETSI PRA incorporating voice	AS/NZS 60950	3
		AS/ACIF S004	3	2
		AS/ACIF S038	3/2	4
A12	CE designed to connect to ISDN — ETSI PRA for data	AS/NZS 60950	3
		AS/ACIF S038	3/2	4
A13	CE designed to connect to dedicated analog line (eg, copper pair, voice frequency or broad‑band line)	Category withdrawn
A14	CE designed to connect to dedicated digital — LMB	AS/NZS 60950	3/2	5
		AS/ACIF S016	3/2	5
A16	Broadband HFC interface CE	Category withdrawn
A17	CE designed to connect to dedicated digital — SDH	Category withdrawn
A18	Dedicated video CE — without TS024 broadcaster LIU	AS/NZS 60950	2
		ACA TS015	1
A19	Broadcaster LIU	AS/NZS 60950	3
		ACA TS024	3
A20	ASA LIU	AS/NZS 60950	3
		ACA TS025	3
A21	CE designed to connect to telex	AS/NZS 60950	3
		ACA TS007	1
A22	CC and related CE	AS/ACIF S008	2	7
A23	Mobile equipment — AMPS	AS/NZS 60950	3	23
		ACA TS005	3
A24	Mobile equipment — GSM	AS/NZS 60950	3	23
		ACA TS018	3/2/1	8
		AS/ACIF S042	3/2/1	8 (b), 27
A25	MobileSat terminal	AS/NZS 60950	3
		ACA TS022	2
		ACA TS028	2
A26	Cordless telecommunications — CT2	Category withdrawn
A27	Cordless telecommunications — PHS	Category withdrawn	29
A28	Cordless telecommunications — DECT	Category withdrawn	29
A39	Mobile equipment — CDMA	AS/NZS 60950	3	23
		AS/ACIF S042	3/2/1	27
A49	CE designed for connection to a non‑switched voiceband only service	AS/NZS 60950	3
		AS/ACIF S006	3
A50	CE designed for connection to a metallic local loop (including broadband, DC power feeding, DC signalling, low frequency AC, voiceband or signalling up to 20kHz)	AS/NZS 60950	3
		AS/ACIF S041	3
		AS/ACIF S043	3
A51	Disability customer equipment	AS/NZS 60950	3	22
		AS/ACIF S002	2
		AS/ACIF S004	2	28
A52	Surge protective devices	AS/NZS 60950	3
		AS/ACIF S002	3	2, 26
		AS/NZS 4117	3
A53	CE used in the supply of a PMTS	AS/NZS 60950	3	23, 24
		AS/ACIF S042	2/1	27

[36]         Schedule 1, Part 2, Category B, table

substitute

Table 1.3

Column 1 Category (note 1)	Column 2 Item	Column 3 Technical standard	Column 4 Compliance level	Column 5 Notes
B29	System integral terminal that is part of a system	AS/NZS 60950	3
		AS/ACIF S003	3	2
		AS/ACIF S004	3	2
B30	Wireless equipment (CT2, PHS, DECT), including proprietary wireless, that is part of a system	AS/NZS 60950	3
		AS/ACIF S004	2	2
		ACA TS019	2
		ACA TS028	2
		ACA TS034	2
B31	Interface for connection of extensions	AS/NZS 60950	3
		AS/ACIF S003	3	2, 25

[37]         Schedule 1, Part 2, Category C, table

substitute

Table 1.4

Column 1 Category	Column 2 Item	Column 3 Technical standard	Column 4 Compliance level	Column 5 Notes
C33	System integral terminal supplied separately	AS/NZS 60950	3
		AS/ACIF S004	3	2
C34	Wireless equipment (CT2, PHS, DECT), including proprietary wireless	AS/NZS 60950	3
		AS/ACIF S004	2	2
		ACA TS019	2
		ACA TS028	2
		ACA TS034	2
C35	Digital isolator	AS/NZS 60950	3
C36	Headset or amplifier	AS/NZS 60950	3
		AS/ACIF S004	3	2
C37	Acoustically coupled CE	AS/ACIF S004	3	2
C38	Music‑on‑hold LIU	AS/NZS 60950	3

[38]         Schedule 1, Part 2, Category D, table

substitute

Table 1.5

Column 1 Category	Column 2 Item	Column 3 Technical standard	Column 4 Compliance level	Column 5 Notes
D40	Telephony equipment mentioned in paragraph 7 (c) of the Technical Standard	ACA TS102	1	10
D41	Modem with handset/headset port mentioned in paragraph 7 (d) of the Technical Standard	ACA TS102	1	11
D42	CE with mains power supply mentioned in subsection 8 (3) of the Technical Standard	ACA TS102	2	12
D43	Cord and cordage mentioned in subsection 11 (2) of the Technical Standard	ACA TS102	2	13
D44	Mobile equipment — AMPS mentioned in item 6 of Schedule 1 of the Technical Standard	ACA TS102	2	14
D45	Mobile equipment — GSM mentioned in item 7 of Schedule 1 of the Technical Standard	ACA TS102	2	15
D46	MobileSat terminal mentioned in item 8 of Schedule 1 of the Technical Standard	ACA TS102	2	16
D47	CE mentioned in paragraph 9 (6) (b) of the Technical Standard	ACA TS102	3	17
D48	CE mentioned in paragraph 9 (6) (c) of the Technical Standard	ACA TS102	18
D49	Any other item to which ACA TS102‑1998 applies	ACA TS102

[39]         Schedule 1, Part 2, note 1

substitute

Notes to Tables 1.1 to 1.5 

Note 1   Categories A5, A6, A13, A15, A16, A17, A26, A27, A28 and B32 have been withdrawn. Other missing sequentially numbered categories do not exist.

[40]         Schedule 1, Part 2, notes 4 to 7

substitute

Note 4   Compliance level 2 applies only for testing the requirements in this standard that are different from the requirements in the ETSI standards.

Note 5   Compliance level 2 applies for testing items with less than 2048 kbit per second interfaces or more than 2048 kbit per second interfaces. For items with 2048 kbit per second interfaces, compliance level 3 applies.

Note 6   This note is reserved.

Note 7   Category A22 applies to customer cables and related customer equipment that are designed or intended to be installed on customer’s premises and connected to a telecommunications network or facility, including all cable types, plugs, sockets and connectors, but not including surge protective devices (SPDs) supplied for installation by registered cabling providers. Such SPDs are required to comply with Category A52.

[41]         Schedule 1, Part 2, note 19

omit

in column 5.

insert

in column 3 of Table 1.1 in Schedule 1.

[42]         Schedule 1, Part 2, note 20

substitute

Note 20   This note is reserved.

[43]         Schedule 1, Part 2, after note 27

insert

Note 28   The applicable clauses are AS/ACIF S004–2001 5.4.3.5 and 5.4.3.6, AS/ACIF S004–2004 5.4.3.5 and 5.4.3.7, AS/ACIF S004–2006 5.4.3.6 and 5.4.3.8.

Note 29   The radiocommunications performance aspects of equipment in this category must comply with radiocommunications regulatory arrangements.

[44]         Schedule 4

omit all the words after ‘Return Your Completed Form To:’

insert

New South Wales Region
(including Sydney, Newcastle, Canberra and Coffs Harbour)

PO Box Q500, Queen Victoria Building NSW 1230
Tel: [phone]
Fax: [phone]
Email: [email protected]

Southern Australia Region
(including Melbourne, Adelaide, Hobart and Wodonga)

PO Box 13120, Law Courts, Melbourne Vic 8010
Tel: [phone]
Fax: [phone]
Email: [email protected]

Northern Australia Region
(including Cairns, Darwin, Townsville, Brisbane and Rockhampton)

PO Box 288, Red Hill Qld 4059
Tel: [phone]
Fax: [phone]
Email: [email protected]

Western Australia Region

PO Box 3061, Perth Adelaide Terrace WA 6832
Tel: [phone]
Fax: [phone]
Email: [email protected]

[45]         Schedule 4A

omit

[46]         Schedule 4A

omit all the words after ‘Return Your Completed Form To:’

insert

New South Wales Region
(including Sydney, Newcastle, Canberra and Coffs Harbour)

PO Box Q500, Queen Victoria Building NSW 1230
Tel: [phone]
Fax: [phone]
Email: [email protected]

Southern Australia Region
(including Melbourne, Adelaide, Hobart and Wodonga)

PO Box 13120, Law Courts, Melbourne Vic 8010
Tel: [phone]
Fax: [phone]
Email: [email protected]

Northern Australia Region
(including Cairns, Darwin, Townsville, Brisbane and Rockhampton)

PO Box 288, Red Hill Qld 4059
Tel: [phone]
Fax: [phone]
Email: [email protected]

Western Australia Region

PO Box 3061, Perth Adelaide Terrace WA 6832
Tel: [phone]
Fax: [phone]
Email: [email protected]

[47]         Schedule 5

omit everything after ‘DECLARATION’

insert

I declare that the product mentioned above complies with the above mentioned standards and all products supplied under this Declaration have not been modified from the sample identified above.	Signature of Authorised Person	Date
	Print Name
	Position in Organisation

[48]         Schedule 5A

omit everything after ‘SUPPLIER’S DECLARATION’

insert

I declare that the disability customer equipment mentioned above complies with the standards mentioned above and that all disability customer equipment supplied under this Declaration have not been modified from the sample identified above.

I declare that I will supply not more than 50 items of the disability customer equipment mentioned above in a calendar year.

Name

Position in Organisation

Signature

Date

[49]         Schedule 7, heading

substitute

Schedule 7        Supplementary compliance documentation

(paragraphs 4.5 (2) (d) and 4.6 (2) (d))

[50]         Schedule 7, Part 1, heading

substitute

Part 1                 Approvals and Test Reports

[51]         Schedule 7, clause 103

omit

Reports:

insert

Test Reports: