Spanline Weatherstrong Building Systems Pty Ltd v Tabellz Pty Ltd

Link copied
Case Copied 79 min read

FEDERAL COURT OF AUSTRALIA

Spanline Weatherstrong Building Systems Pty Ltd v Tabellz Pty Ltd
[2013] FCA 1019

Citation: Spanline Weatherstrong Building Systems Pty Ltd v Tabellz Pty Ltd [2013] FCA 1019
Parties: SPANLINE WEATHERSTRONG BUILDING SYSTEMS PTY LTD ACN 002 968 087 v TABELLZ PTY LTD ACN 095 855 833
File number: NSD 1206 of 2011
Judge: GRIFFITHS J
Date of judgment: 9 October 2013
Catchwords:

TRADE PRACTICES – misleading or deceptive conduct – passing off – application of the principles in Parkdale Custom Built Furniture Pty Ltd v Puxu Pty Ltd (1982) 149 CLR 191 and Peter Bodum A/S v DKSH Australia Pty Ltd (2011) 280 ALR 639 – whether secondary meaning established in the design of the applicant’s product – whether persons in the relevant class able to distinguish between products in the marketplace – expectation of consumers acting reasonably in their own interests – effect of sticker identifying manufacturer – consideration of whether conduct of the respondent involved passing off their product as that of the applicant’s product

CONTRACT – breach of contract – franchise agreement – whether specific performance available as a remedy

Legislation: Australian Consumer Law (Sch 2 to the Competition and Consumer Act 2010 (Cth)) ss 18 and 29
Trade Practices Act 1974 (Cth)
Cases cited: Fletcher Challenge Ltd v Fletcher Challenge Pty Ltd (1981) 1 NSWLR 196 204
Hall v Busst (1960) 104 CLR 206
International Advisor Services Pty Ltd v XYYX Pty Ltd [2008] NSWSC 2
Legal & General Life of Australia Limited v A Hudson Pty Limited (1985) 1 NSWLR 314
Parkdale Custom Built Furniture Pty Ltd v Puxu Pty Ltd (1982) 149 CLR 191
Peter Bodum A/S v DKSH Australia Pty Ltd (2011) 280 ALR 639
The Amble Inn Pty Ltd v Ryan [2001] NSWSC 875
Date of hearing: 9-11 September 2013
Place: Sydney
Division: GENERAL DIVISION
Category: Catchwords
Number of paragraphs: 194
Counsel for the Applicant: Mr M Cleary
Solicitor for the Applicant: Elliot and Sochaki Lawyers
Counsel for the Respondent: Mr R Wilson
Solicitor for the Respondent: Coleman Greig Lawyers

IN THE FEDERAL COURT OF AUSTRALIA

NEW SOUTH WALES DISTRICT REGISTRY

GENERAL DIVISION

NSD 1206 of 2011

BETWEEN: SPANLINE WEATHERSTRONG BUILDING SYSTEMS PTY LTD ACN 002 968 087
Applicant
AND:

TABELLZ PTY LTD ACN 095 855 833
Respondent

JUDGE:

GRIFFITHS J

DATE OF ORDER:

9 OCTOBER 2013

WHERE MADE:

SYDNEY

THE COURT ORDERS THAT:

1.In the light of these reasons, the parties, on or before 23 October 2013, are to seek to agree appropriate orders, including as to costs, giving effect to these reasons.

2.If the parties are unable to reach agreement pursuant to order 1, each shall provide to my associate its proposed orders and a written outline of submissions not exceeding three pages in length in support of those proposed orders on or before 23 October 2013.  The parties should also indicate whether they request a further oral hearing to finalise the orders.

Note:    Entry of orders is dealt with in Rule 39.32 of the Federal…

CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Spanline Weatherstrong Building Systems Pty Ltd v Tabellz Pt... and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2013] FCA 1019
Decision Date

CaseChat Overview and Summary

Spanline Weatherstrong Building Systems Pty Ltd (Spanline) commenced proceedings against Tabellz Pty Ltd (Tabellz) in the Federal Circuit Court of Australia, alleging breaches of contract, infringement of intellectual property rights, and misleading or deceptive conduct under the Australian Consumer Law (ACL). Spanline, a company engaged in the design and manufacture of building systems and products, primarily steel roof sheets, alleged that Tabellz, a former franchisee, misappropriated trade secrets and infringed on its intellectual property. The court was required to determine whether Tabellz had breached the franchise agreement, misappropriated confidential information, and engaged in misleading or deceptive conduct under the ACL.

The Federal Circuit Court of Australia found in favour of Tabellz on all counts. The court determined that Tabellz had not breached the franchise agreement by continuing to use the 2001 machine to manufacture roof sheets. The court found that the Double-U profile was not a unique trade secret or intellectual property of Spanline, as it was not sufficiently distinctive or protected under Australian law. Furthermore, the court held that Tabellz had not engaged in misleading or deceptive conduct under the ACL, as there was no evidence that Tabellz made false or misleading representations to consumers.

The Federal Circuit Court of Australia rejected Spanline's claims under the ACL and for passing off. The court found that the Double-U profile was not a distinctive trade secret or intellectual property of Spanline, and that Tabellz had not engaged in misleading or deceptive conduct. The court did find that Tabellz had breached the franchise agreement by continuing to use the 2001 machine, but this did not result in any significant relief for Spanline. The court did not grant specific performance, as damages would be an adequate remedy. The court ordered the parties to seek to agree on appropriate orders, including costs, within 14 days of the decision. If the parties were unable to reach an agreement, they were required to provide proposed orders and written submissions to the court. The court did not schedule a further hearing to finalise the orders, unless requested by the parties.

Orders

Orders of the court

Full text does not contain this section.

Background

Background to the litigation

Full text does not contain this section.

Evidence

Evidence Before The Court

Fifthly, if any of Spanline’s causes of action are established, questions will arise as to what if any relief should be granted. THE EVIDENCE SUMMARISED It is convenient to now outline the parties’ lay and expert evidence. (a) Mr Anthony Way As noted above, Mr Way is the current managing director of Spanline. He swore two affidavits. His first affidavit describes the history of Spanline’s business and, in particular, its franchise operations. He attached to his affidavit a DVD entitled “Evolution of Spanline”, which is distributed to Spanline franchisees and sub-franchisees and describes how Mr Way and his father established Spanline in 1985 and together they designed the Double-U steel roof sheet profile. Spanline was the first business in Australia to manufacture and supply steel roof sheets as an alternative to roof sheets made from aluminium or some other material. Mr Way did not claim that the DVD is made available to consumers, as opposed to Spanline’s franchisees and sub-franchisees as part of their induction to Spanline’s business. He says that Spanline franchisees are entitled only to sell Spanline designed products which are manufactured either by Spanline itself or by a franchisee using machines which are designed by Spanline, such as the roof rolling machines. Mr Way says that Spanline’s Double-U roof profile is “immediately apparent to the eye” and that that profile distinguishes Spanline’s product from those of its competitors. He says that the “exclusive design and formation of the Double-U profile distinguishes it from all its competitors by the series of radii that [form] the exclusive shape”. Mr Way then referred to what he described as “photographic specification sheets” which Spanline uses throughout Australia to train its design consultants of the significance of comparing the other roofing profiles that are used by various competitors in our industry”. By reference to that document, which was said to be Item 2 to Mr Way’s first affidavit, Mr Way made the observation that “Apollo’s profile is somewhat like the Spanline Double-U profile”, but he then added that he had personally designed the Apollo product and, in his view, it was “significantly different to the Double-U”. In fact, the material annexed in Item 2 to his affidavit did not compare Spanline’s product with competitors’ roofing profiles. Rather it comprised a two page document from Spanline’s website, the first page of which is set out in [5] above and the second page of which describes specifications for three different Spanline roof sheets which apparently use the Double-U profile. It transpired that the document which Mr Way was referring to is a nine page document entitled “Competitors Products Specifications and Comparisons” which is Item 64 to Mr Catto’s affidavit and is part of Exhibit A. That document contains photographs and specifications relating to various roofing products which Spanline apparently considered to be competitors (see further [83] below).

Decision

Reasons for decision

Applying those principles here, I do not consider that specific performance should be granted as damages would be an adequate remedy (but they are not sought). While I accept that the category of “unique chattels” or personal goods is not closed (see Meagher, Gummow and Lehane’s, Equity Doctrine and Remedies, 4th Edition at [20-040]), I do not accept that the 2001 machine is a “unique chattel” in the established sense of that concept. Nor do I accept that the 2001 machine has any special value to Spanline. The evidence indicates that an alternative machine can be obtained for a cost of approximately $190,000. Of course, Tabellz is not at liberty to use the 2001 machine without the ongoing relevant constraints imposed by the franchise agreement but I see no evidentiary basis which warrants any relief being given in that respect. CONCLUSION For these reasons, I reject Spanline’s claims under both the Australian Consumer Law and for passing off. Spanline has succeeded in a relatively minor aspect as far as its claims in breach of contract are concerned. In the light of these reasons, the parties should, within 14 days hereof, seek to agree appropriate orders, including as to costs. If they are unable to reach agreement, each should provide to my associate within that period its proposed orders and a written outline of submissions not exceeding three pages in length in support of those proposed orders. The parties should also indicate whether they request a further hearing to finalise the orders. Otherwise, that will be done on the papers.

Ratio Decidendi

Legal Principle Established

It is convenient at this point to describe in broad terms Spanline’s business and franchise operations, its past relationship with Tabellz when it was a Spanline franchisee and Tabellz’s current business operations. (a) Spanline’s business and franchise operations Spanline designs, manufactures and sells building systems and products through a network of franchisees and sub-franchisees around Australia. Its current network has 39 franchisees and sub-franchisees nationally. Spanline has operated since about 1985. It was established by Mr Anthony Way Snr and Mr Anthony Way Jnr. Mr Way Jnr (Mr Way) is currently the managing director of Spanline. His father is no longer involved in the Spanline business. Spanline designs, manufactures and sells various products for use in home improvements, including a steel roof sheet product which it says has a unique “Double-U” roof profile. Set out immediately below is an extract from Spanline’s website which describes Spanline’s Double-U roof profile and its features. The reference to “Double-U” is a reference to the shape of the “pans or valleys” on each side of the central riser: Spanline also manufactures and sells through its franchise network other building products, including high tensile steel gutters and beams. Initially, Spanline’s claims against Tabellz concerned both the Double-U roof sheets and Spanline’s steel gutter products. Spanline abandoned its claims in respect of the gutter products at the commencement of the hearing. Spanline’s Double-U steel roof sheets are manufactured by Spanline franchisees using specially designed roof roll forming machines which have been developed and manufactured by Spanline for exclusive use by its franchisees. In simple terms, the manufacturing process involves a Spanline franchisee feeding high tensile steel sheeting (which is supplied by Spanline and other suppliers) into a Double-U roof roll forming machine which the franchisee owns and operates under a franchise agreement with Spanline. The machine produces lengths or spans of the steel roof sheeting product with the Double-U profile. The roof sheets are then sold by the franchisee through its retail outlets, using the Spanline brand name. The product is used, along with other Spanline supplied products – such as beams and gutters – to build home extensions or additions of the type described above. Construction is normally carried out by the Spanline franchisee after the customer has approved a building design. It is rare for Spanline to sell its products other than in circumstances where a Spanline franchisee is responsible for the construction of the project. As will emerge below, this is an important fact in determining the relevant class of consumers of Spanline’s Double-U roof sheets. Spanline claims to be a market leader in the home improvements industry. There are approximately 2,500 personnel involved in its national franchise operations. It says that it has 30 percent of that national market and generates retail sales nationally in excess of $60 million annually. It purchases approximately 1,600 tonnes of steel sheeting a year and completes on average approximately 7,000 home improvement projects annually. It is not clear, however, whether these figures relate only to Spanline’s Double-U steel roof sheets. It is more likely that the figures relate to all of the Spanline’s steel products (which include gutters and beams). Spanline also manufactures and sells other roof sheets which have a different profile, including a product called “Slendek” (which is a roof sheet with a flat deck profile), as well as an insulated roof sheet known as “Climatek”.