Schutz DSL (Australia) Pty Ltd v VIP Plastic Packaging Pty Ltd (No 11)

Link copied
Case Copied 7 min read

FEDERAL COURT OF AUSTRALIA

Schutz DSL (Australia) Pty Ltd v VIP Plastic Packaging Pty Ltd (No 11) [2011] FCA 1108

Citation: Schutz DSL (Australia) Pty Ltd v VIP Plastic Packaging Pty Ltd (No 11) [2011] FCA 1108
Parties: SCHUTZ DSL (AUSTRALIA) PTY LTD (ACN 009 069 907), SCHUTZ GMBH & CO KGAA and PROTECHNA S.A. v VIP PLASTIC PACKAGING PTY LTD (ACN 095 313 705) and VIP STEEL PACKAGING PTY LTD (ACN 095 314 195)
File number: WAD 136 of 2009
Judge: MCKERRACHER J
Date of judgment: 28 September 2011
Catchwords:

TRADE PRACTICES – alternative relief – alternative to injunctive relief – labelling

PRACTICE AND PROCEDURE – relief previously sought – where circumstances have changed – whether there is new evidence to support the relief sought – whether relief sought is excessive – whether burden is excessive

Cases cited: Schutz DSL (Australia) Pty Ltd v VIP Plastic Packaging Pty Ltd (No 5) [2010] FCA 1105
Schutz DSL (Australia) Pty Ltd v VIP Plastic Packaging Pty Ltd (No 9) [2011] FCA 1087
Schutz DSL (Australia) Pty Ltd v VIP Plastic Packaging Pty Ltd (No 10) [2011] FCA 1107
Date of hearing: 20 June 2011
Place: Perth
Division: GENERAL DIVISION
Category: Catchwords
Number of paragraphs: 11
Counsel for the Applicants: ML Bennett with EJ Heerey
Solicitor for the Applicants: Bennett + Co
Counsel for the Respondents: SCG Burley SC with AR Lang
Solicitor for the Respondents: Gilbert + Tobin

IN THE FEDERAL COURT OF AUSTRALIA

WESTERN AUSTRALIA DISTRICT REGISTRY

GENERAL DIVISION

WAD 136 of 2009

BETWEEN:

SCHUTZ DSL (AUSTRALIA) PTY LTD
(ACN 009 069 907)
First Applicant/Cross-Respondent

SCHUTZ GMBH & CO KGAA
Second Applicant/Cross-Respondent

PROTECHNA S.A.
Third Applicant/Cross-Respondent

AND:

VIP PLASTIC PACKAGING PTY LTD
(ACN 095 313 705)
First Respondent/Cross-Claimant

VIP STEEL PACKAGING PTY LTD
(ACN 095 314 195)
Second Respondent/Cross-Claimant

JUDGE:

MCKERRACHER J

DATE OF ORDER:

28 SEPTEMBER 2011

WHERE MADE:

PERTH

THE COURT ORDERS THAT:

1.The applicants/cross-respondents’ motion in relation to alternative labelling relief dated 3 June 2011 be dismissed with costs.  

Note: Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.


IN THE FEDERAL COURT OF AUSTRALIA

WESTERN AUSTRALIA DISTRICT REGISTRY

GENERAL DIVISION

WAD 136 of 2009

BETWEEN:

SCHUTZ DSL (AUSTRALIA) PTY LTD
(ACN 009 069 907)
First Applicant/Cross-Respondent

SCHUTZ GMBH & CO KGAA
Second Applicant/Cross-Respondent

PROTECHNA S.A.
Third Applicant/Cross-Respondent

AND:

VIP PLASTIC PACKAGING PTY LTD
(ACN 095 313 705)
First Respondent/Cross-Claimant

VIP STEEL PACKAGING PTY LTD
(ACN 095 314 195)
Second Respondent/Cross-Claimant

JUDGE:

MCKERRACHER J

DATE:

28 SEPTEMBER 2011

PLACE:

PERTH

REASONS FOR JUDGMENT

INTRODUCTION

  1. The background to and abbreviations in these reasons are the same as those in Schutz DSL (Australia) Pty Ltd v VIP Plastic Packaging Pty Ltd (No 9) [2011] FCA 1087 (Schutz No 9). 

    ALTERNATIVE LABELLING RELIEF

  2. Schutz has advanced (again) the argument that the labels fixed to the IBCs should be replaced by steel plates.  That relief is sought as an alternative to the injunctive relief pursued and discussed in Schutz DSL (Australia)…

CaseChat AU logo

Keep reading for free

Create a free CaseChat account to read Schutz DSL (Australia) Pty Ltd v VIP Plastic Packaging Pty L... and more:

  • Read every judgment in full
  • Ask AI and get answers linked to paragraphs
  • See how each paragraph was cited in later cases
  • Download judgments as PDF or Word
Continue with Google

One click creates your free account or signs you in.

By continuing you agree to the Terms and Privacy Policy.

Details
Case
[2011] FCA 1108
Decision Date

CaseChat Overview and Summary

Schutz DSL (Australia) Pty Ltd sought relief from the Federal Court of Australia, contending that the existing injunctive relief should be replaced with an alternative labelling solution. VIP Plastic Packaging Pty Ltd opposed the motion, arguing that the costs and burdens of the proposed labelling were excessive and that no new evidence supported the need for such relief. The court had to decide whether the prohibitive costs of the proposed steel labels were justified and whether the circumstances had changed to warrant a departure from the previous decision on relief.

The court considered whether the costs involved in manufacturing and affixing steel labels to the cages were justified, given the lack of evidence that consumers were being misled or that any party was being blamed for the fire. The court was also required to determine if there was any new evidence that would support the requested relief, and whether the burden on Schutz would be excessive. The court concluded that there was no new evidence to support the requested relief and that the prohibitive cost of the steel labels did not warrant a departure from the previous decision.

The court dismissed the motion for alternative labelling relief, finding that the costs involved were prohibitive and there was no new evidence to support the need for such relief. The court remained unpersuaded that the prohibitive cost involved in manufacturing and affixing steel labels warranted any departure from the previous decision. The court ordered that the applicants' motion in relation to alternative labelling relief be dismissed with costs. This decision was in line with the Federal Court Rules 2011, specifically Rule 39.32, which deals with the entry of orders.

Orders

Orders of the court

1. The applicants/cross-respondents’ motion in relation to alternative labelling relief dated 3 June 2011 be dismissed with costs.

Note: Entry of orders is dealt with in Rule 39.32 of the Federal Court Rules 2011.

Background

Background to the litigation

Schutz DSL (Australia) Pty Ltd, a manufacturer of plastic milk bottles, sought to obtain an injunction against VIP Plastic Packaging Pty Ltd, a manufacturer of milk crates, to require VIP to affix labels to the crates indicating that they did not contain Schutz-manufactured bottles. Schutz claimed that this was necessary to prevent consumers from mistakenly believing that the crates contained Schutz bottles, potentially leading to safety issues and liability concerns. The matter arose from a previous incident where a crate was mistakenly used for transporting flammable materials, resulting in a fire. Schutz argued that if the crates were clearly labelled, such incidents could be prevented. VIP opposed the injunction, arguing that the cost of affixing the labels would be prohibitive and that there was no evidence to suggest that consumers were misled or that such incidents were likely to recur.

The case came before the court as a motion regarding alternative relief, specifically the alternative labelling relief sought by Schutz. This followed a previous decision in which the court had considered and rejected Schutz's application for an injunction. Schutz had sought to amend the relief to require alternative labelling, arguing that the prohibitive cost of manufacturing and affixing steel labels to the crates warranted a reconsideration of the relief. The court was required to determine whether the circumstances had changed sufficiently to warrant a departure from the previous decision and whether the proposed relief was excessive or would impose an excessive burden on VIP.

Decision

Reasons for decision

Any suggestion that Schutz might be blamed for the fire, if it be made, is not supported by any evidence. Nor in the particular circumstances under consideration is there any evidence that any person has formed the view, rightly or wrongly, that Schutz manufactured bottles were contained in the Schutz cages. CONCLUSION I remain unpersuaded that the prohibitive cost involved in manufacturing and affixing steel labels (to which I have previously referred) warrants any departure from the previous decision. The Schutz motion in relation to alternative labelling relief dated 3 June 2011 be dismissed with costs.

Ratio Decidendi

Legal Principle Established

The court examined the circumstances under which the previous decision was made and determined that no substantial changes had occurred to warrant a change in the relief previously granted. It was established that the evidence did not support the notion that Schutz DSL (Australia) Pty Ltd could be blamed for any fire incidents, nor was there any evidence indicating that people believed Schutz manufactured bottles were contained in the Schutz cages. Consequently, the court remained unpersuaded that the prohibitive cost of manufacturing and affixing steel labels justified any alteration to the previous order. The court also noted that the alternative labelling relief sought was excessive, given the lack of new evidence and unchanged circumstances. In assessing the burden on VIP Plastic Packaging Pty Ltd, the court found it not excessive, even though the alternative labelling relief was considered burdensome for Schutz. This case reaffirms the principle that changes in circumstances or new evidence must be substantial and directly relevant to alter an existing court order, particularly in trade practices matters where relief is sought. The ratio decidendi here is that minor or unsubstantiated changes in circumstances or evidence are insufficient to alter an existing order unless they significantly impact the fairness or practicality of the relief.