Sale of Hazardous Goods (Children's Cots) Order 2008 (TAS)
Sale of Hazardous Goods (Children's Cots) Order 2008
The Products Safety Committee makes the following order under section 8 of the Sale of Hazardous Goods Act 1977 .
Clause 4(2)
1. | clause 1 | omit the clause |
2. | clause 2 | omit the clause |
3. | clause 4 | omit the clause |
4. | clause 6.1(f) | omit the clause |
5. | clause 6.1(g) | omit the clause and substitute the following clause: |
(g) With the dropside in the closed position and the mattress base in the lower position, when tested in accordance with Appendix A with a force of 50N it shall not be possible for a 30 mm probe to pass through any aperture between the mattress base and the sides and between the mattress base and the ends. | ||
6. | clause 6.3(e) – note | insert at the end of the note "For a lift and push dropside release mechanism, either the lift or push action shall comply with 6.3(d)." |
7. | clause 6.7 – notes | omit note 1 |
8. | clause 7 | omit the clause |
9. | clause 8 | omit the clause |
10. | clause 9.2(c) | omit the clause |
11. | clause 10 | omit the clause |
12. | Paragraphs A5(h) and A5(i) | omit the Paragraphs and substitute the following Paragraphs: |
A5(h) For any gaps recorded in Step (g) between the mattress base in the lower position and the side and ends with the dropside in the closed position, insert the 30 mm diameter probe and apply a force of 50N. | ||
A5(i) For any gaps recorded in Step (g) except for the gaps tested in Step (h), insert the 30 mm diameter probe and apply a force of 100N. | ||
A5(j) Record all gaps that allowed the passage of the 30 mm diameter probe when tested in accordance with A5(h) and A5(i) except for the following: | ||
(i) Gaps formed between – | ||
(A) fixed sides and the mattress base in the upper position; and | ||
(B) fixed ends and the mattress base in the upper position. | ||
(ii) Gaps formed between the dropside in both open and closed positions and the mattress base in the upper position. | ||
(iii) Gaps formed between the dropside in the open position and the mattress base in the lower position. | ||
13. | Paragraphs A5(j) to A5(p) | renumber as Paragraphs A5(k) to A5(q) |
14. | Paragraph A6(b) | omit "but not the 50 mm diameter probe as noted in Paragraphs A5(i) and A5(g) respectively" and substitute "as recorded in Paragraph A5(j)" |
Clause 5(2)
1. | clause 1 | omit the clause |
2. | clause 2 | omit the clause |
3. | clause 4 | omit the clause |
4. | clause 6.1(f) | omit the clause |
5. | clause 6.1(g) | omit the clause |
6. | clause 6.7 | omit "5 mm" and substitute "8 mm" |
7. | clause 6.7 – notes | omit note 1 |
8. | clause 6.8(c) | omit the clause |
9. | clause 6.8(d) | omit the clause |
10. | clause 6.8(e) | omit the clause |
11. | clause 7 | omit the clause |
12. | clause 8 | omit the clause |
13. | clause 9.2(b) | omit the clause |
14. | clause 9.2(c) | omit the clause |
15. | clause 9.3 | omit the clause |
16. | clause 9.4 | omit the clause |
17. | clause 9.5 | omit the clause |
18. | clause 9.6 | omit the clause |
19. | clause 9.7 | omit the clause |
20. | clause 9.8 | omit the clause |
21. | clause 10 | omit the clause |
22. | clause 11 | omit the clause |
23. | clause 12 | omit the clause |
Clause 7
Sale of Hazardous Goods Order 1998 (No. 114 of 1998) |
This order was made by the Products Safety Committee at a meeting held on 19 March 2008.
CHRIS BATT
Chairman
M. BICEVSKIS
Member
Displayed and numbered in accordance with the
Notified in the
This is administered in the Department of Justice.
0
0
0