Queensland Building Services Authority Amendment Regulation (No. 2) 1997 (Qld)

Queensland Subordinate Legislation 1997 No. 445 Queensland Building Services Authority Act 1991 QUEENSLAND BUILDING SERVICES AUTHORITY AMENDMENT REGULATION (No. 2) 1997 TABLE OF PROVISIONS Section Page 1 Short title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Regulation amended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Amendment of s 3 (Interpretation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Amendment of s 7A (Approval of alternative qualifications and experience for design/drafting licences) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 Amendment of sch 2 (Classes of licences and licence requirements) . . . . 5

s1 2 s3 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 ˙ Short title 1. This regulation may be cited as the Queensland Building Services Authority Amendment Regulation (No. 2) 1997 . ˙ Regulation amended 2. This regulation amends the Queensland Building Services AuthorityRegulation 1992 . ˙ Amendment of s 3 (Interpretation) 3.(1) Section 3, heading— omit, insert— ‘ Definitions ’. (2) Section 3(1), definition “State college” — omit. (3) Section 3(1)— insert— ‘ “ANTA” means the Australian National Training Authority established under the ANTA Act. “ANTA Act” means the Australian National Training Authority Act 1992 (Cwlth). “approved assessor” means a person endorsed by Construction Training Queensland to assess, against the draft construction standards (levels 4–6), the competency of persons to carry out the scope of work relevant to a general building or house building licence. “approved authority” , for a class of licence, means— (a) a State college; or (b) a person registered as a national building and construction industry skills assessor, for the class of licence, on the national register of assessors. “commission” means the Vocational Education, Training and Employment

s4 3 s4 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 Commission established under the VETE Act. “Construction Training Australia” means National Building and Construction Industry Training Council Limited (trading as Construction Training Australia), being an industry training advisory body within the meaning of the ANTA Act. 1 “Construction Training Queensland” means Construction Industry Training Council (Queensland) Inc. (using the business name Construction Training Queensland), being an industry training advisory body recognised by the commission for the VETE Act. “draft construction standards (level 4)” means— (a) the document prepared by Construction Training Australia; and (b) designated as construction standards level 4 (third draft), (Sept 1997). “draft construction standards (level 5)” means— (a) the document prepared by Construction Training Australia; and (b) designated as construction standards level 5 (third draft), (Sept 1997). “draft construction standards (level 6)” means— (a) the document prepared by Construction Training Australia; and (b) designated as construction standards level 6 (third draft), (Sept 1997). “national competency standards” means a document— (a) designated as national competency standards; and (b) endorsed by ANTA for the Statement. “national register of assessors” means the register of national building and construction industry skills assessors administered by— (a) Construction Training Australia; and 1 The Australian National Training Authority Act 1992 (Cwlth), section 4(1) defines “industry training advisory body” as follows— t‘h “ e in M d i u n s i t s r te y ri t a r l a C in o i u n n g ci a l d t v o is b o e ry an bo in d d y u ” stmryeatnrasinainngoragdavniissoartyiobnoodrybfoodrythde cplaurepdosbeys of the Statement;’.

s5 4 s5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 (b) for Queensland—Construction Training Queensland. “required competency” , for a class of licence, means the competency, assessed against relevant national competency standards, to carry out the scope of work relevant to the class of licence. “required competency (general building)” means the competency, assessed against the draft construction standards (levels 4–6), to carry out the scope of work relevant to a general building licence. “required competency (house building)” means the competency, assessed against the draft construction standards (level 4), to carry out the scope of work relevant to a house building licence. “State college” see section 4 of the VETE Act. 2 “Statement” see section 4(1) of the ANTA Act. 3 “VETE Act” means the Vocational Education, Training and EmploymentAct 1991. ’. ˙ Amendment of s 7A (Approval of alternative qualifications and experience for design/drafting licences) 4. Section 7A(1)(b), ‘clause 3(a)’— omit, insert— ‘section 3(a)’. ˙ Amendment of sch 2 (Classes of licences and licence requirements) 5.(1) Schedule 2, part 1, section 3— omit, insert— 2 Vocational Education, Training and Employment Act 1991 , section 4— “State college” means— (a) any State college or other means of technical and further education; and (b) any State senior college continued or established under this Act. 3 Australian National Training Authority Act 1992 (Cwlth), section 4(1)— “ en S t t i a tl t e e d m “ e A nt” Nmateioannasl thVeosctaattioemnaelnEt d(auccaotpioynoafnwdhTicrhaiinsinsget Soyustteinmt”heagSrceheedduolne)by the Commonwealth and the States and published on 21 July 1992.

s5 5 s5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 ‘ Qualifications ‘ 3. Either— (a) successful completion of any of the following courses— (i) Degree in Construction Management CN31 (QUT); (ii) Associate Diploma of Applied Science (Building) CNJ45 (TAFE); (iii) General Builders Registration CNB29 (TAFE); (iv) Associate Diploma of Building 5185 ((TAFE NSW); (v) Building Supervision Advanced Certificate ((TAFE NSW); (vi) degree courses in building (NSW); (vii) equivalent course acceptable to the Authority; or (b) until 31 December 1998— (i) if there are relevant national competency standards for the class of licence—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence; or (ii) if there are no relevant national competency standards for the class of licence—attainment of recognition of the required competency (general building) from an approved assessor.’. (2) Schedule 2, part 2, section 3— omit, insert— ‘ Qualifications ‘ 3. Either— (a) successful completion of any of the following courses— (i) Degree in Construction Management CN31 (QUT); (ii) Associate Diploma of Applied Science (Building) CNJ45 (TAFE); (iii) House Builders Registration CNB28 (TAFE); (iv) Associate Diploma of Building 5185 ((TAFE NSW);

s5 6 s5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 (v) Building Supervision Advanced Certificate ((TAFE NSW); (vi) degree courses in building (NSW); (vii) equivalent course acceptable to the Authority; or (b) until 31 December 1998— (i) if there are relevant national competency standards for the class of licence—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence; or (ii) if there are no relevant national competency standards for the class of licence—attainment of recognition of the required competency (house building) from an approved assessor.’. (3) Schedule 2, part 3, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of a bricklaying apprenticeship; or (b) attainment of recognition as a qualified bricklayer under the VocationalEducation,TrainingandEmploymentAct1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (4) Schedule 2, part 4, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of a carpentry and joinery apprenticeship; or (b) attainment of recognition as a qualified carpenter and joiner under the Vocational Education, Training and Employment Act 1991 ,

s5 7 s5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (5) Schedule 2, part 5, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of the concrete worker’s traineeship; or (b) attainment of recognition as a qualified concrete worker under the VocationalEducation,TrainingandEmploymentAct1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (6) Schedule 2, part 6, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of the relevant sections of the concrete worker’s traineeship; or (b) attainment of recognition as a qualified concrete worker (steel fixing) under the VocationalEducation,TrainingandEmployment Act 1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (7) Schedule 2, part 8, section 3— omit, insert—

s5 8 s5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 ‘ Technical qualifications ‘ 3. Either— (a) successful completion of a painting apprenticeship; or (b) attainment of recognition as a qualified painter under the VocationalEducation,TrainingandEmploymentAct1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (8) Schedule 2, part 11, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of a wall and floor tiling apprenticeship; or (b) attainment of recognition as a qualified wall and floor tiler under the Vocational Education, Training and Employment Act 1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (9) Schedule 2, part 12, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of a roof tiling apprenticeship; or (b) attainment of recognition as a qualified roof tiler under the VocationalEducation,TrainingandEmploymentAct1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved

s5 9 s5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 authority for the class of licence.’. (10) Schedule 2, part 13, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of a solid plastering apprenticeship; or (b) attainment of recognition as a qualified solid plasterer under the VocationalEducation,TrainingandEmploymentAct1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (11) Schedule 2, part 14, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of a fibrous plastering apprenticeship; or (b) attainment of recognition as a qualified fibrous plasterer under the VocationalEducation,TrainingandEmploymentAct1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (12) Schedule 2, part 15, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of an apprenticeship in formwork carpentry or carpentry and joinery; or (b) attainment of recognition as a qualified formwork carpenter or

s 5 10 s 5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 carpenter and joiner under the VocationalEducation,Trainingand Employment Act 1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (13) Schedule 2, part 16, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of an apprenticeship in stone masonry; or (b) attainment of recognition as a qualified stonemason under the VocationalEducation,TrainingandEmploymentAct1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (14) Schedule 2, part 17, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of an apprenticeship in an engineering trade; or (b) attainment of recognition as a qualified engineering tradesperson under the Tradesmen’s Rights Regulation Act 1946 (Cwlth); or (c) attainment of recognition as a qualified engineering tradesperson under the Vocational Education, Training and Employment Act1991 , section 82; or (d) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (15) Schedule 2, part 18, section 3—

s 5 11 s 5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) satisfactory completion of any training program approved under the VocationalEducation,TrainingandEmploymentAct1991 and nominated in the Board’s policies; or (b) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (16) Schedule 2, part 19, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of a shop fitting apprenticeship or carpentry and joinery apprenticeship; or (b) attainment of recognition as a qualified shop fitter or carpenter and joiner under the VocationalEducation,TrainingandEmployment Act 1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (17) Schedule 2, part 20, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of an appropriate traineeship or apprenticeship in the building or engineering trade; or (b) attainment of appropriate recognition under the VocationalEducation, Training and Employment Act 1991 , section 82; or (c) until 31 December 1998—attainment of recognition of the

s 5 12 s 5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 required competency for the class of licence from an approved authority for the class of licence.’. (18) Schedule 2, part 21, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) satisfactory completion of any training program approved under the VocationalEducation,TrainingandEmploymentAct1991 and nominated in the Board’s policies; or (b) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (19) Schedule 2, part 22, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) successful completion of an apprenticeship in sheet metal working or as a refrigeration, airconditioning and engineering tradesperson; or (b) attainment of recognition under the VocationalEducation,Training and Employment Act 1991 , section 82; or (c) attainment of recognition under the Tradesmen’s Rights Regulation Act 1946 (Cwlth) in the relevant occupational calling; or (d) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (20) Schedule 2, part 23, section 3— omit, insert—

s 5 13 s 5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997 ‘ Technical qualifications ‘ 3. Either— (a) satisfactory completion of any training program approved under the VocationalEducation,TrainingandEmploymentAct1991 and nominated in the Board’s policies; or (b) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (21) Schedule 2, part 24, section 3— omit, insert— ‘ Technical qualifications ‘ 3. Either— (a) satisfactory completion of any training program approved under the VocationalEducation,TrainingandEmploymentAct1991 and nominated in the Board’s policies; or (b) until 31 December 1998—attainment of recognition of the required competency for the class of licence from an approved authority for the class of licence.’. (22) Schedule 2, parts 26 to 29, section 3(b) (in each part), ‘section 7A’— omit, insert— ‘section 7A of this regulation’. ENDNOTES 1. Made by the Governor in Council on 11 December 1997. 2. Notified in the gazette on 12 December 1997. 3. Laid before the Legislative Assembly on . . . 4. The administering agency is the Queensland Building Services Authority. © State of Queensland 1997

s 5 14 s 5 Queensland Building Services Authority Amendment (No. 2) No. 445, 1997