Petroleum (Submerged Lands) (Diving Safety) Regulations 2002
Statutory Rules 2002 No. 300 as amended
made under the
Petroleum (Submerged Lands) Act 1967
This compilation was prepared on 1 January 2005
taking into account amendments up to SR 2004 No. 271
Prepared by the Office of Legislative Drafting and Publishing,
Attorney-General’s Department, Canberra
Contents
Part 1 Preliminary
1 Name of Regulations [see Note 1]
2 Commencement
3 Application
4 Definitions
5 Meaning of diving
6 When a diving operation begins and ends
Part 2 Diving safety management systems
7 No diving without DSMS
8 Contents of DSMS
9 Acceptance of new DSMS
10 Acceptance of revised DSMS
11 Grounds for rejecting DSMS
12 Notice of reasons
13 Register of DSMSs
14 Revision of DSMS
15 Notice to revise DSMS
Part 3 Diving project plans
16 Diving project plan to be approved
17 Diving project plan to Safety Authority if there is no operator
18 Diving project plan to Safety Authority if requested
19 Updating diving project plan
20 Contents of diving project plan
21 No diving without approved diving project plan
Part 4 Involvement of divers and members of the workforce
22 Involvement of divers and members of the workforce in DSMS and diving project plan
Part 5 Safety responsibilities
23 Safety responsibilities of diving contractors
24 Safety in the diving area
25 Diving depths
Part 6 Diving supervisors
26 Appointment of diving supervisors
27 Duties of diving supervisors
Part 7 Start-up notices
28 Start-up notice
Part 9 Diving operations
30 Divers in diving operations
31 Medical certificates
Part 10 Records
32 Diving operations record
33 Divers’ log books
Part 11 Transitional provisions
Division 1 Preliminary
34 Definitions for Part 11
Division 2 Diving Safety Management Systems
35 Existing DSMS remain in force
36 Documents to be given to Safety Authority
37 Decisions to be made by Safety Authority
38 Notices taken to be given by Safety Authority
Division 3 Diving Project Plans
39 Existing diving project plans remain in force
40 Diving project plans to be given to Safety Authority
41 Safety Authority to give operator diving project plan for approval in certain circumstances
Division 4 Other documents
42 Start-up notices to be given to Safety Authority
Notes
Part 1 Preliminary
1 Name of Regulations [see Note 1]
These Regulations are the Petroleum (Submerged Lands) (Diving Safety) Regulations 2002.
2 Commencement
These Regulations commence on 27 May 2003.
3 Application
These Regulations apply to a diving operation that is an offshore petroleum operation in Commonwealth waters.
4 Definitions
In these Regulations:
accepted DSMS means a DSMS that has been accepted by the Safety Authority under regulation 9 or 10.
Act means the Petroleum (Submerged Lands) Act 1967.
ADAS means the Australian Diver Accreditation Scheme administered by the Board of the Australian Diver Accreditation Scheme on behalf of the Department.
AS/NZS, followed by a number, means the Australian and New Zealand Standard of that number, as existing from time to time.
Commonwealth waters has the meaning given…
Overview
The Petroleum (Submerged Lands) (Diving Safety) Regulations 2002 were enacted to address safety concerns associated with diving operations in Australia's offshore petroleum sector. These regulations were made under the authority of the Petroleum (Submerged Lands) Act 1967 and were designed to ensure the safety of divers and other personnel involved in offshore petroleum activities. The primary policy objective of these regulations is to establish comprehensive safety management systems and operational protocols to mitigate risks associated with diving operations in Commonwealth waters. By setting stringent standards for diving safety management systems, project plans, and operational procedures, the regulations aim to protect human life and prevent accidents in the hazardous environment of offshore petroleum activities.
Scope and Application
The Petroleum (Submerged Lands) (Diving Safety) Regulations 2002, made under the Petroleum (Submerged Lands) Act 1967, apply to diving operations that are part of offshore petroleum operations in Commonwealth waters. These regulations establish safety standards and procedures for diving operations, covering aspects such as Diving Safety Management Systems (DSMS), diving project plans, safety responsibilities, and medical requirements for divers. The regulations mandate that diving contractors must have an accepted DSMS and an approved diving project plan before commencing any diving work. Diving contractors and operators must ensure that all personnel involved in diving operations are competent, qualified, and medically fit to dive. The Safety Authority, which is established under the Act, has the responsibility to review and approve DSMSs and diving project plans. The regulations also impose strict liability for certain breaches, meaning that compliance is mandatory and non-compliance can result in penalties regardless of intent. Additionally, the regulations detail the specific duties of diving supervisors and require the maintenance of diving operations records and divers' log books. The scope of these regulations is limited to the diving operations associated with offshore petroleum activities in Commonwealth waters, excluding other types of diving operations not related to this specific context.
Key Provisions
- The Petroleum (Submerged Lands) (Diving Safety) Regulations 2002 establish the legal framework for diving safety in offshore petroleum operations within Commonwealth waters. These regulations require diving contractors to implement a Diving Safety Management System (DSMS) that meets specific standards and is accepted by the Safety Authority before commencing any diving work (Regulation 7). The DSMS must detail the management of diving operations, hazard identification, risk assessments, and continuous improvement processes (Regulation 8). Operators and contractors must ensure that all diving activities adhere to approved DSMS and diving project plans, which must be updated as necessary (Regulations 16-19). Diving supervisors play a critical role in ensuring that operations are conducted safely and in compliance with the DSMS and diving project plans (Regulations 26-27).
- These regulations impose several obligations on parties involved in diving operations. Diving contractors must provide a safe working environment and ensure compliance with accepted DSMS and diving project plans (Regulations 23-24). They must also ensure that divers are competent, have current qualifications, and valid medical certificates (Regulations 30-31). Operators must approve diving project plans and ensure effective consultation with divers and workforce members during the plan's preparation (Regulations 22, 16). Diving supervisors must supervise operations, ensure compliance with safety plans, and maintain accurate diving operations records (Regulations 26-27, 32).
- Violations of these regulations can result in significant penalties. For instance, conducting diving operations without an approved DSMS can incur penalties of up to 50 penalty units (Regulation 7). Failing to provide a diving project plan or allowing diving without an approved plan can result in penalties of up to 50 penalty units (Regulation 21). Diving supervisors who fail to carry out their duties can face penalties of up to 20 penalty units (Regulation 27). Additionally, strict liability applies to certain provisions, meaning that individuals can be held liable even if they took all reasonable precautions to comply with the regulations (e.g., Regulations 7(5), 30(8), 30(9)).
- Area of Law
- Environmental Law
- Instrument
- Regulation
- Concepts
- Definitions & Interpretation
- Regulatory Standards
- Enforcement Powers
- Reporting & Disclosure Obligations
- Compliance Obligations
- Offence Provisions