Petroleum and Gas (Production and Safety) Amendment Regulation (No. 2) 2011 (Qld)

Case
No judgment structure available for this case.

Petroleum and Gas (Production and Safety) Amendment Regulation (No. 2) 2011
Queensland Petroleum and Gas (Production and Safety) Amendment Regulation (No. 2) 2011 Subordinate Legislation 2011 No. 112 made under the Petroleum and Gas (Production and Safety) Act 2004 Contents Page 1 Short title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Commencement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Regulation amended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Amendment of s 91B (Prescribed compliance plate and related matters for gas system installation—Act, s 734) . . . . . . . . . . . . . 2 5 Amendment of sch 1 (Mandatory and preferred standards for safety requirements). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Petroleum and Gas (Production and Safety) Amendment Regulation (No. 2) 2011 [s 1] 1 Short title This regulation may be cited as the Petroleum and Gas (Production and Safety) Amendment Regulation (No. 2) 2011 . 2 Commencement This regulation commences on 1 July 2011, immediately after the commencement of the PetroleumandGas(Productionand Safety) Amendment Regulation (No. 1) 2011 , sections 13, 14(1) and 29(2). 3 Regulation amended This regulation amends the Petroleum and Gas (Production and Safety) Regulation 2004 . 4 Amendment of s 91B (Prescribed compliance plate and related matters for gas system installation—Act, s 734) (1) Section 91B(4)— omit, insert— ‘(4) The prescribed way to attach a prescribed compliance plate for the installation of a relevant gas system is— (a) for a system installed in a building with 1 or more electrical meter boxes— (i) to the interior surface of the door of the relevant electrical meter box; or (ii) if the compliance plate can not be attached as mentioned in subparagraph (i)—to the exterior surface of the door of the relevant electrical meter box; or (b) for another system— (i) if the system has a cylinder compartment—to a prominent place in or near the cylinder compartment; or Page 2 2011 SL No. 112
Petroleum and Gas (Production and Safety) Amendment Regulation (No. 2) 2011 [s 5] (ii) otherwise—to a prominent place adjacent to the first pressure regulator, first gas meter or gas isolation valve for the system. Examples of relevant gas systems to which paragraph (b) applies a relevant gas system installed in a caravan or boat or a building without an electrical meter box’. (2) Section 91B(6)— insert— cylinder compartment means a compartment, enclosed area or partitioned-off space primarily used for installing a gas cylinder or other equipment associated with a relevant gas system. first gas meter , for a relevant gas system, means the device used to measure the volume of gas passing through the device that is closest to the source of gas supplying the system. first pressure regulator , for a relevant gas system, means the device regulating the pressure of gas passing through the device that is closest to the source of gas supplying the system. gas isolation valve , for a relevant gas system, means a valve installed in the piping of the system to isolate the pipe work downstream of the source of gas supplying the system.’. (3) Section 91B(6), definition relevant electrical meter box , paragraph (b), example, after ‘block’— insert— ‘or lot in commercial premises’. 5 Amendment of sch 1 (Mandatory and preferred standards for safety requirements) (1) Schedule 1, part 1, entry for ‘Plant advisory standard’— 2011 SL No. 112 Page 3
Petroleum and Gas (Production and Safety) Amendment Regulation (No. 2) 2011 [s 5] omit, insert— ‘‘Plant code of practice 2005’ published by Workplace Health and Safety Queensland, Department of Justice and Attorney-General operating plant that is a drilling rig preferred’. (2) Schedule 1, part 5, entry for AS/NZS 5601— omit, insert— ‘AS/NZS 5601 ‘Gas installations’ Part 1 ‘General installations’ (2010) (including all of sections 3 to 6) Part 2 ‘LP Gas installations in caravans and boats for non-propulsive purposes’ (2010) (including all of sections 3 to 9) installation of gas systems preferred’. ENDNOTES 1 Made by the Governor in Council on 23 June 2011. 2 Notified in the gazette on 24 June 2011. 3 Laid before the Legislative Assembly on . . . 4 The administering agency is the Department of Employment, Economic Development and Innovation. © State of Queensland 2011 Page 4 2011 SL No. 112
Actions
Download as PDF Download as Word Document


Cases Citing This Decision

0

Cases Cited

0

Statutory Material Cited

0