Occupational Health and Safety (Plant) (Amendment) Regulations 2001 (Vic)
Occupational Health and Safety (Plant)
(Amendment) Regulations 2001
S.R. No. 53/2001
TABLE OF PROVISIONS
Regulation Page
1. Objective 1 2. Authorising provision 1 3. Commencement 1 4. Principal Regulations 1 5. New Hazard Standards 2
i
STATUTORY RULES 2001
S.R. No. 53/2001
Occupational Health and Safety Act 1985
Occupational Health and Safety (Plant)
(Amendment) Regulations 2001
The Governor in Council makes the following Regulations:
Dated: 12 June 2001Responsible Minister:
BOB CAMERON
Minister for WorkCover
HELEN DOYE
Clerk of the Executive Council
1. Objective
The objective of these Regulations is to amend the
Occupational Health and Safety (Plant)
Regulations 1995 to incorporate Australian
Standard "AS 4343 Pressure Equipment—HazardLevels".
2. Authorising provision
These Regulations are made under section 59 of the Occupational Health and Safety Act 1985.
3. Commencement
These Regulations come into operation on 15 June
2001.
4. Principal Regulations
Occupational Health and Safety (Plant) (Amendment)
Regulations 2001
S.R. No. 53/2001 r. 4
In these Regulations, the Occupational Health and
Safety (Plant) Regulations 19951 are called thePrincipal Regulations.
5. New Hazard Standards
(1) In regulation 105(1) of the Principal
Regulations—
(a) Part 1, Pressure Equipment Manufacture—
Assurance of Product Quality" substitutein the definition of "boiler" for "AS 3920 Levels"; and
(b) "AS 3920 Part 1, Pressure Equipment
Manufacture—Assurance of Productin the definition of "pressure piping" for Equipment—Hazard Levels"; and
(c) "AS 3920 Part 1, Pressure Equipment
Manufacture—Assurance of Productin the definition of "pressure vessel" for Equipment—Hazard Levels".
(2) In Schedule 2 of the Principal Regulations, for
"AS 3920—Part 1, Pressure Equipment
Manufacture—Assurance of Product Quality"
(wherever occurring) substitute "AS 4343,Pressure Equipment—Hazard Levels".
═══════════════
Occupational Health and Safety (Plant) (Amendment)
Regulations 2001
| Endnotes | S. | R. No. 53/2001 |
| ENDNOTES |
1 Reg 4: S.R. No. 81/1995. Reprint No. 1 as at 17 July 1998. Further
amended by S.R. No. 138/1998.
Table of Applied, Adopted or Incorporated Matter Required by
Subordinate Legislation Regulations 1994
Note that the following table of applied, adopted or incorporated matter is
included in accordance with the requirements of regulation 6 of the SubordinateLegislation Regulations 1994.
Statutory Rule Title of applied, adopted or Matter in Provision incorporated document applied,
adopted or
incorporated
documentRegulation 5(1)(a) Australian Standard AS 4343, Those which amends the Pressure Equipment—Hazard provisions definition of "boiler" Levels which define in regulation 105(1) of hazard levels A, the Principal B, C and D for Regulations boilers Regulation 5(1)(b) Australian Standard AS 4343, Those which amends the Pressure Equipment—Hazard provisions definition of "pressure Levels which define piping" in regulation hazard levels A, 105(1) of the Principal B, C and D for Regulations pressure piping Regulation 5(1)(c) Australian Standard AS 4343, Those which amends the Pressure Equipment—Hazard provisions definition of "pressure Levels which define vessel" in regulation hazard levels A, 105(1) of the Principal B, C and D for Regulations pressure vessels Regulation 5(2) which Australian Standard AS 4343, Those amends Schedule 2 of Pressure Equipment—Hazard provisions the Principal Levels which define Regulations hazard levels A,
B and C for
boilers and
pressure vessels
0
0
0