Industrial Training (Apprenticeship Training) Amendment Regulations (No. 5) 2007 (WA)

(3320 GOVERNMENT GAZETTE, WA 21 December 2007

ED301*

Industrial Training Act 1975

Industrial Training (Apprenticeship Training)

Amendment Regulations (No. 5) 2007

Made by the Governor in Executive Council.

1.            Citation

These regulations are the Industrial Training (Apprenticeship
Training) Amendment Regulations (No. 5) 2007.

2.            Commencement

These regulations come into operation as follows:

(a)	regulations 1 and 2 — on the day on which these regulations are published in the Gazette;
(b)	the rest of the regulations — on 1 January 2008.

see the relevant amendment regulations.

3.            The regulations amended

The amendments in these regulations are to the Industrial
Training (Apprenticeship Training) Regulations 1981.

4.            Regulation 10 inserted

After regulation 9 the following regulation is inserted —

44  

10.          Savings and transitional provisions

Schedule 5 sets out savings and transitional provisions relating to certain amendments to these regulations.

Note: For savings and transitional provisions relating to earlier amendments,

21 December 2007 GOVERNMENT GAZETTE, WA (3321

5.            Schedule 1 amended

Schedule 1 is amended as follows:

(a) by deleting the item for each of the trades for which the

Schedule specifies a term of 5 years;

(b) in the list of trades for which the Schedule specifies a

term of 4 years -

(i) by deleting the item for each of the following

trades -

(I)	Bespoke and Surgical Bootmaking;
(II)	Binding and Finishing;
(Ill)	Electrical Installing;
(N)	Engine Reconditioning;
(V)	Footwear Repairing;
(VI)	Graphic Pre-Press;
(VU)	Instrument Fitting;
(VIII)	Printing Machining;
(IX)	Screen Printing Stencil Preparation;
(X)	Ship Carpentry and Joinery;
(XI)	Tailoring;
(XII)	Weighing Instrument Mechanics;

(ii)     by inserting the following items in the appropriate alphabetical positions -

14

Jeweller
Watch and Clock Making

Watch and Clock Repairing

(c) in the list of trades for which the Schedule specifies a

term of 3.5 years by inserting the following items in the

appropriate alphabetical positions -

44

Graphic Pre-Press

Print Machinist

IF

(d) in the list of trades for which the Schedule specifies a

term of 3 years -

(i)      by deleting the item for Footwear Manufacturing;

(ii)      by inserting the following items in the appropriate alphabetical positions -

44

Binding and Finishing
Screen Printing Stencil Preparation

6322 GOVERNMENT GAZETTE, WA 21 December 2007

6.            Schedule 2 amended

Schedule 2 is amended by deleting the item for each of the following trades -

(a)	Bespoke and Surgical Bootmaking;
(b)	Bookbinding and Guillotine Machine Operating;
(c)	Camera Operating, Plate Making and Etching;

(d) Composing Machine Mechanism;

(e)	Electrical Installing;
(f)	Footwear Manufacturing;
(g)	Footwear Repairing;
(h)	Instrument Fitting;

(i)    Jewellery;

(j) Ship Carpentry and Joinery;

(k) Stereotyping;

(1) Weighing Instrument Mechanics.

7. Schedule 3 amended
Schedule 3 is amended as follows:

(a) by deleting the item for each of the following trades -

(i)     Instrument Fitting;

(ii)     Composing Printing Machine (Letterpress and/or Lithographic);

(b) in columns 4 and 5 of the item for Aircraft Maintenance

Engineer - Avionics by deleting "2 weeks of 40" and inserting instead -

" 2 weeks for 40

(c) in columns 4 and 5 of the item for Aircraft Maintenance

Engineer - Mechanical by deleting "2 weeks of 40" and inserting instead -

" 2 weeks for 40 ";

(d) in column 4 of the item for Aircraft Maintenance

Engineer - Structures by deleting "2 weeks of 2 40" and inserting instead -

44

2 weeks for 40 ";

(e) in columns 2, 3 and 4 of the item for Engineering

Tradesperson (Electrical) -

(i)     by deleting "one day at 40" and inserting instead -

" 1 day for 40

(ii)     by deleting "the period directed" and inserting instead -

44

the periods directed ".

21 December 2007 GOVERNMENT GAZETTE, WA 6323

8.            Schedule 3A amended

Schedule 3A is amended by inserting the following items in the appropriate alphabetical positions -

Binding and	460 hours	460 hours
Finishing
Graphic	445 hours	445 hours
Pre-Press
Jeweller	352 hours	352 hours 160 hours
Print Machinist	425 hours	425 hours
Screen Printing	425 hours	425 hours
Stencil
Preparation
Watch and	300 hours	300 hours 120 hours
Clock Making
Watch and	300 hours	300 hours 120 hours
Clock Repairing

9.            Schedule 4 amended

Schedule 4 is amended by deleting the item for each of the following trades -

(a)	Electrical Installing;
(b)	Ship Carpentry and Joinery.

10.          Schedule 5 inserted

After Schedule 4 the following Schedule is inserted -

Schedule 5 - Savings and transitional provisions

[r. 10]

1. Provisions relating to the Industrial Training
(Apprenticeship Training) Amendment Regulations

(No. 5) 2007

(1) Inthisclause —

"amendment regulations" means the Industrial Training

(Apprenticeship Training) Amendment Regulations

(No. 5) 2007;

"new term", in relation to a trade, means the term

prescribed in relation to that trade in Schedule 1 to
these regulations, as amended by the amendment

regulations;

"new trade" means -

(a)	Binding and Finishing; or
(b)	Graphic Pre-Press; or
(c)	Jeweller; or
(d)	Print Machinist; or
(e)	Screen Printing Stencil Preparation; or

6324 GOVERNMENT GAZETTE, WA 21 December 2007

(f)	Watch and Clock Making; or
(g)	Watch and Clock Repairing;

"old trade" means -

(a)	Bespoke and Surgical Bootmaking; or
(b)	Binding and Finishing; or
(c)	Electrical Installing; or
(d)	Engine Reconditioning; or
(e)	Footwear Manufacturing; or
(f)	Footwear Repairing; or
(g)	Graphic Pre-Press; or
(h)	Instrument Fitting; or

(i)      Jewellery; or

(j)	Printing Machining; or
(k)	Screen Printing Stencil Preparation; or

(1) Ship Carpentry and Joinery; or

(m)	Tailoring; or
(n)	Watch and Clock Making; or
(o)	Watch and Clock Repairing; or
(p)	Weighing Instrument Mechanics.

(2) Subject to this clause these regulations as in force

immediately before 1 January 2008 continue to apply to and

in relation to -

(a)	an apprentice who commenced service in an old trade under an apprenticeship agreement before 1 January 2008; or
(b)	a person who -

(i)      commenced employment as a probationer in an old trade before 1 January 2008; and

(ii) completes that probationary employment
after 1 January 2008; and

(iii) on completing that probationary
employment commences service under an
apprenticeship agreement,

(an "existing probationer").

(3) The parties to the apprenticeship agreement of an existing

probationer may, with the approval of the Director, agree in

the apprenticeship agreement -

(a) also a new trade, that the apprentice is to be
employed in the same trade but that the term of the if the probationer was employed in a trade that is trade; or

(b) that-

(i) the apprentice is to be employed in a new

trade (instead of the old trade in which he or
she was employed as a probationer); and

21 December 2007 GOVERNMENT GAZETTE, WA 6325

(ii) the term of the apprenticeship is to be the

new term for that new trade.

(4) If the parties to an apprenticeship agreement agree in the
manner described in subclause (3)(a) or (b), subclause (2)
ceases to apply to and in relation to the apprentice when he
or she commences service under the apprenticeship

agreement.

,,

By Command of the Governor,

M. C. WAUCHOPE, Clerk of the Executive Council.