Heavy Vehicle National Law Regulation 2014 (QLD)

Heavy Vehicle National Law Regulation 2014

Part 1    Preliminary

1   Short title

This regulation may be cited as the Heavy Vehicle National Law Regulation 2014 .

2   Commencement

This regulation commences on 10 February 2014 on the commencement of Chapter 3 of the Heavy Vehicle National Law (Queensland).

Part 2    Prescriptions under the Act

3   Prescribed widths and lengths for the Act, ss 20 and 21

For a provision of the Act stated in column 1 of the following table—

(a)  column 2 of the table prescribes vehicle width; and

(b)  column 3 of the table prescribes vehicle length.

Table

Column 1	Column 2	Column 3
Provision of Act	Vehicle width	Vehicle length
section 20 (2)(a)	4.5m	35m
section 20 (2)(b)	5.5m	35m
section 21 (2)(a)	4.5m	35m
section 21 (2)(b)	5.5m	35m

4   Fee payable for route assessment under Heavy Vehicle National Law (Queensland)

(1) This section provides for the fee payable for a route assessment under the Heavy Vehicle National Law (Queensland), section 159.

(2)  The fee payable for the route assessment is the amount decided by the relevant road manager.

(3)  The amount decided by the road manager must not be more than the reasonable cost of the route assessment.

Part 3    [Repealed]

5   [Repealed]

6   [Repealed]

7   [Repealed]

8   [Repealed]

9   [Repealed]

10   [Repealed]

11   [Repealed]

12   [Repealed]

13   [Repealed]

14   [Repealed]

15   [Repealed]

16   [Repealed]

17   [Repealed]

18   [Repealed]

19   [Repealed]

20   [Repealed]

21   [Repealed]

22   [Repealed]

23   [Repealed]

24   [Repealed]

25   [Repealed]

26   [Repealed]

27   [Repealed]

28   [Repealed]

29   [Repealed]

Part 4    Modification of application of national regulation

30   Operation of pt 4

This part states the modifications of the provisions of the Heavy Vehicle (Mass, Dimension and Loading) National Regulation for the purpose of modifying the application of the regulation in Queensland under section 43(2) of the Act.

31   Insertion of new s 7A

Heavy Vehicle (Mass, Dimension and Loading) National Regulation , after section 7 —insert—

7A   Application of one tonne tri-axle mass transfer allowance in Queensland

(1)  This section modifies the application of the one tonne tri-axle mass transfer allowance in Queensland.

(2)  The one tonne tri-axle mass transfer allowance applies only in relation to the use of a heavy vehicle, or a component of a heavy vehicle, in an area or on a route shown on a map made and published under this section.

(3)  The road authority may make, and publish on the department’s website, a map showing an area or route to which the one tonne tri-axle mass transfer allowance applies.

(4)  The road authority may amend the map from time to time by publishing, on the department’s website—

(a)  a new version of the map showing the amendment; and

(b)  a notice stating the way in which the map has been amended and the date of the amendment.

(5)  The map, or amended map, takes effect when it is published on the department’s website.

(6)  Before making or amending the map, the road authority must—

(a)  consider whether an area or route proposed to be shown on the map is suitable for the one tonne tri-axle mass transfer allowance; and

(b)  consult with the road manager for each road within the area or on the route.

(7)  The road authority must, as soon as practicable after the map or amended map is published under this section—

(a)  give the Regulator a copy of the map or amended map; and

(b)  ask the Regulator to publish the map or amended map on the Regulator’s website.