Fuel Standard (Diesel) Amendment Determination 2002 (No. 1) (Cth)
Fuel Standard (Diesel) Amendment Determination 2002 (No. 1)
I, DAVID ALISTAIR KEMP, Minister for the Environment and Heritage, make this Determination under section 21 of the Fuel Quality Standards Act 2000.
Dated 15 October 2002
DAVID KEMP
Minister for the Environment and Heritage
Name of Determination
This Determination is the Fuel Standard (Diesel) Amendment Determination 2002 (No. 1).
Commencement
This Determination commences on 16 October 2002.
Amendment of Fuel Standard (Diesel) Determination 2001
Schedule 1 amends the Fuel Standard (Diesel) Determination 2001.
Schedule 1 Amendments
(section 3)
[1] Section 1
substitute
1 Name of Determination
This Determination is the Fuel Standard (Automotive Diesel) Determination 2001.
[2] After section 2
insert
2A Definition
In this Determination:
diesel means automotive diesel.
[3] After section 4
insert
5 Operability standards for diesel
(1) To allow the more effective operation of engines, diesel of a kind mentioned in an item of the following table must, in relation to the parameter mentioned in that item, comply with the specification for that parameter mentioned in that item.
(2) For subsection (1), a parameter of diesel of a kind mentioned in an item of the table complies with the specification for that item only if that is the result after the diesel has been tested, in relation to that parameter, using the American Society for Testing and Materials (ASTM) or Institute of Petroleum (IP) method of testing mentioned in that item.
Item
Kind of diesel
Parameter
Specification
Referee test method
1
All diesel
Carbon residue (10% distillation residue)
0.2 mass % maximum
ASTM D4530
2
All diesel
Water and sediment
0.05 vol % maximum
ASTM D2709
3
All diesel held by a terminal or refinery for sale or distribution
Conductivity at ambient temperature
50 per pS/m minimum at ambient temperature
ASTM D2624
4
All diesel
Oxidation stability
25 mg/l maximum
ASTM D2274
5
All diesel
Colour
2 maximum
ASTM D1500
6
All diesel
Copper corrosion (3 hours at 50°C)
Class 1 maximum
ASTM D130
7
All diesel
Flash point
61.5°C minimum
ASTM D93
8
All diesel
Filter blocking tendency
2.0 maximum
IP 387
9
All diesel containing less than 500 ppm sulfur
Lubricity
0.460 mm maximum
IP 450
0
0
0