Fuel Standard (Biodiesel) Amendment Determination 2009 (No. 1) (Cth)
Fuel Standard (Biodiesel) Amendment Determination 2009 (No. 1)1
Fuel Quality Standards Act 2000
I, PETER ROBERT GARRETT, Minister for the Environment, Heritage and the Arts, make this Determination under section 21 of the Fuel Quality Standards Act 2000.
Dated 6 February 2009
PETER ROBERT GARRETT
Minister for the Environment, Heritage and the Arts
Name of Determination
This Determination is the Fuel Standard (Biodiesel) Amendment Determination 2009 (No. 1).
Commencement
This Determination commences on the day after it is registered.
Amendment of Fuel Standard (Biodiesel) Determination 2003
Schedule 1 amends the Fuel Standard (Biodiesel) Determination 2003.
Schedule 1 Amendments
(section 3)
[1] Section 3, definition of Energy Institute
omit
[2] Subsection 4 (1), table, item 4
omit
4 Carbon residue — 10% distillation residue; or 0.30% mass 18 September 2003 Carbon residue — 100% distillation sample 0.050% mass 18 September 2003
insert
4 Carbon residue — 10% distillation residue 0.30% mass 18 September 2003
[3] Subsection 4 (2), table, item 9
substitute
9 Cetane number; or
Derived cetane number
51.0 (min)
51.0 (min)
18 September 2005
1 March 2009
[4] Section 5
substitute
Testing methods
(1) Compliance with the standard set out in section 4 for the substance or property is determined by the testing method, as existing on the commencement of the Fuel Standard (Biodiesel) Amendment Determination 2009 (No. 1), for the substance or property in the following table.
Item
Substance or property
Testing method
1 Acid value ASTM D664 2 Methanol EN 14110 3 Carbon residue — 10% distillation residue ASTM D4530 4 Cetane number ASTM D613 5 Derived cetane number ASTM D6890 6 Contamination (total) EN 12662 7 Copper strip corrosion (a) for specification Class 1 (max) — EN ISO 2160 or ASTM D130
(b) for specification No. 3 (max) — ASTM D130
8 Density ASTM D1298 9 Distillation T90 ASTM D1160 10 Ester content EN 14103 11 Flashpoint ASTM D93 12 Glycerol (free) ASTM D6584 13 Glycerol (total) ASTM D6584 14 Metals — Group I (Na, K) EN 14538 15 Metals — Group II (Ca, Mg) EN 14538 16 Oxidation stability prEN 15751 or EN 14112 17 Phosphorus EN 14107 18 Sulfur ASTM D5453 19 Sulfated ash ASTM D874 20 Viscosity ASTM D445 21 Water and sediment ASTM D2709
(2) For subsection (1):
(a) ASTM followed by an alphanumeric code means the testing method developed by ASTM International under the alphanumeric code; and
(b) prEN, EN and EN ISO followed by a number means the testing method developed by the European Committee for Standardization (CEN) under the code and number.
(3) For item 10 of the table in subsection (1), if biodiesel contains C‑17‑methyl esters, the ester content may be measured by using the modified procedure set out in S. Schober, I. Seidl and M. Mittelbach, ‘Ester content evaluation in biodiesel from animal fats and lauric oils’, European Journal of Lipid Science and Technology, vol 108, issue 4, 2006, pp 309–314.
Note
1. All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See
0
0
0