Financial Sector (Collection of Data) determination No. 68 of 2005 Reporting Standard ARS 113.0 (2005) Market Risk (Cth)

Financial Sector (Collection of Data) determination No. 68 of 2005

Reporting Standard ARS 113.0 (2005)

Financial Sector (Collection of Data) Act 2001

I, Wayne Stephen Byres, a delegate of APRA, under paragraph 13(1)(a) of the Financial Sector (Collection of Data) Act 2001 (‘the Act’) MAKE the reporting standard set out in the Schedule, which applies to the financial sector entities referred to in paragraph 2 of the reporting standard.
Under section 15 of the Act, I DECLARE that the reporting standard shall begin to apply those financial sector entities on the date of registration on the Federal Register of Legislative Instruments.
Dated 27 July 2005
[Signed]
Wayne Byres
Executive General Manager
Diversified Institutions Division
APRA
Interpretation

In this Notice

APRA means the Australian Prudential Regulation Authority.

Schedule

Reporting Standard ARS 113.0 (2005)

Market Risk
Objective of this reporting standard
This reporting standard is made under section 13 of the Financial Sector (Collection of Data) Act 2001 (the Collection of Data Act). It requires certain authorised deposit-taking institutions (ADIs) that are locally-incorporated (excluding specialist credit card institutions), to report to APRA, generally on a quarterly basis, in relation to their market risk.
This reporting standard outlines the overall requirements for the provision of relevant information to APRA. It should be read in conjunction with:

Form ARF 113.0 Market Risk (Form ARF 113.0) and the associated instructions (both of which are attached and form part of this reporting standard); and
·Prudential Standard APS 113 Capital Adequacy: Market Risk and associated guidance notes.
Purpose

Data collected in Form ARF 113.0 is used by APRA for the purpose of prudential supervision including assessing compliance with Prudential Standard APS 113 Capital Adequacy: Market Risk. It may also be used by the Reserve Bank of Australia and the Australian Bureau of Statistics.
Application and commencement
This reporting standard will apply, from the date of registration on the Federal Register of Legislative Instruments, to locally-incorporated ADIs covered by paragraphs 3 and 4.
Information required
A locally-incorporated ADI (other than a specialist credit card institution) that is a highest parent entity in relation to a consolidated ADI group must provide APRA with the information required by Form ARF 113.0, on a ‘Consolidated Group’ basis, for each reporting period.
A locally-incorporated ADI (other than a specialist credit card institution) must, if APRA determines in writing in relation to the ADI, provide APRA with the information required by Form ARF 113.0 on a ‘Licensed ADI’ basis for each reporting period that commences after APRA has made the determination (even if the ADI is also required to provide information under paragraph 3). APRA may make such a determination if, having regard to the particular circumstances of the ADI, APRA considers it necessary or desirable to require the ADI to provide the information for the purposes of the prudential regulation of the ADI.
Forms and method of submission
The information required by this reporting standard must be given to APRA either:
(a)in electronic form, using one of the electronic submission mechanisms provided by the ‘Direct to APRA’ (also known as ‘D2A’) application; or
(b)manually completed on paper, which must be faxed or mailed to APRA’s head office.
Note: the Direct to APRA application software and paper forms may be obtained from APRA.
Reporting periods and due dates
Subject to paragraph 7, a locally-incorporated ADI must provide the information required by this reporting standard for each quarter based on the financial year (within the meaning of the Corporations Act 2001) of the ADI.
APRA may, by notice in writing, change the reporting periods, or specified reporting periods, for a particular ADI, to require it to provide the information required by this reporting standard more frequently, or less frequently, having regard to:
(a)the particular circumstances of the ADI;
(b)the extent to which the information is required for the purposes of the prudential supervision of the ADI; and
(c)the requirements of the Reserve Bank of Australia or the Australian Bureau of Statistics.
The information required by this reporting standard must be provided to APRA by 20 business days after the end of the reporting period to which the information relates.
APRA may grant an ADI an extension of a due date in writing, in which case the new due date for the provision of the information will be the date on the notice of extension.
Quality control
The information provided by an ADI under this reporting standard (except for the information required under paragraph 3) must be the product of processes and controls that have been reviewed and tested by the external auditor of the ADI. AGS 1008 ‘Audit Implications of Prudential Reporting Requirements for Authorised Deposit-taking Institutions’, issued by the Auditing and Assurances Standards Board of the Australian Accounting Research Foundation, provides guidance on the scope and nature of the review and testing required from external auditors. This review and testing must be done on an annual basis or more frequently if necessary to enable the external auditor to form an opinion on the accuracy and reliability of the data.
All information provided by an ADI under this reporting standard must be subject to processes and controls developed by the ADI for the internal review and authorisation of that information. It is the responsibility of the board and senior management of the ADI to ensure that an appropriate set of policies and procedures for the authorisation of data submitted to APRA is in place.
Authorisation
If an ADI submits information under this reporting standard using the ‘Direct to APRA’ software, it will be necessary for an officer of the ADI to digitally sign, authorise and encrypt the relevant data. For this purpose, APRA’s certificate authority will issue ‘digital certificates’, for use with the software, to officers of the ADI who have authority from the ADI to transmit the data to APRA.
If information under this reporting standard is provided in paper form, it must be signed on the front page of the relevant completed form by either:

(a) the Principal Executive Officer of the ADI; or
(b) the Chief Financial Officer of the ADI (whatever his or her official title may be).
Minor alterations to forms and instructions

APRA may make minor variations to:

(a) a form that is part of this reporting standard, and the instructions to such a form, to correct technical, programming or logical errors, inconsistencies or anomalies; or
(b) the instructions to a form, to clarify their application to the form
without changing any substantive requirement in the form or instructions.

If APRA makes such a variation it must notify in writing each ADI that is required to report under this reporting standard.

Transitional
If the due date for lodgement in respect of a reporting period is a day after the date of registration of this reporting standard on the Federal Register of Legislative Instruments, an ADI must report under this reporting standard in respect of that reporting period (including where the reporting period ended before the date of registration).
Interpretation - classifications of ADIs
In this reporting standard:
Accounting Standard AASB 1024 means the accounting standard so designated made by the Australian Accounting Standards Board, being the accounting standard that applied in respect of reporting periods (within the meaning of the accounting standard) commencing immediately before 1 January 2005.
ADI means an authorised deposit-taking institution within the meaning of the Banking Act 1959.
ADI list means the attached ADI list.
consolidated ADI group means a group comprising:

(a)      an ADI that is a highest parent entity; and
(b)      each subsidiary (within the meaning of Accounting Standard AASB 1024) of that ADI, whether the subsidiary is locally-incorporated or not, other than a subsidiary that is excluded by the instructions attached to this standard.
highest parent entity means an ADI that satisfies all of the following conditions:
(a)      it is locally-incorporated;
(b)      it has at least one subsidiary (within the meaning of Accounting Standard AASB 1024); and
(c)      it is not itself a subsidiary (within the meaning of Accounting Standard AASB 1024) of an ADI that is locally-incorporated.
locally-incorporated means, subject to paragraph 18, incorporated in Australia.
specialist credit card institution means an ADI whose name appears under the heading ‘Specialist Credit Card Institutions (SCCIs)’ in the ADI list.

For the purposes of this reporting standard, Bank of China is taken to be a locally-incorporated ADI.
If an ADI is not in the ADI list, then if the ADI engages in credit card issuing or credit card acquiring, or both, and does not otherwise carry on banking business within the meaning of section 5 of the Banking Act 1959, it is taken to be a specialist credit card institution for the purposes of this reporting standard.
APRA may in writing determine that an ADI is taken to be a specialist credit card institution for the purposes of this reporting standard (even if, under paragraph 17, 18 or 19, it comes within a different classification).
Interpretation - other definitions
In this reporting standard:
business days means ordinary business days, exclusive of Saturdays, Sundays and public holidays.
Principal Executive Officer means the principal executive officer of the ADI for the time being, by whatever name called, and whether or not he or she is a member of the governing board of the entity.
reporting period means a reporting period under paragraph 6 or, if applicable, paragraph 7.

The ADI list
Australian-owned Banks

Adelaide Bank Limited
AMP Bank Limited
Australia and New Zealand Banking Group Limited
Bank of Queensland Limited
Bendigo Bank Limited
Commonwealth Bank of Australia
Commonwealth Development Bank of Australia Limited (a subsidiary of Commonwealth Bank of Australia)
Elders Rural Bank Limited
Macquarie Bank Limited
Members Equity Bank Pty Limited
National Australia Bank Limited
St George Bank Limited
Suncorp-Metway Limited
Westpac Banking Corporation
Foreign Subsidiary Banks
Arab Bank Australia Limited
Bank of Cyprus Australia Pty Limited
BankWest (the trading name of Bank of Western Australia Limited, a foreign subsidiary bank following its sale to Bank of Scotland in December 1995)
Citibank Pty Limited (a subsidiary of Citibank N.A.)
HSBC Bank Australia Limited
ING Bank (Australia) Limited
Investec Bank (Australia) Limited
Laiki Bank (Australia) Limited
NM Rothschild & Sons (Australia) Limited
Rabobank Australia Limited (a subsidiary of Rabobank Nederland from October 1994)
Branches of Foreign Banks
ABN AMRO Bank N.V.
Bank of America, National Association
Bank of China (subject to depositor protection provisions of the Banking Act 1959)
Bank of Tokyo-Mitsubishi, Ltd
Barclays Capital (the trading name of Barclays Bank plc)
BNP Paribas
Citibank N.A.
Credit Suisse
Deutsche Bank AG
HSBC Bank plc
ING Bank NV
JPMorgan Chase Bank, National Association
Mizuho Corporate Bank, Ltd
Oversea-Chinese Banking Corporation Limited
Rabobank Nederland (the trading name of Co-operative Central Raiffeisen-Boerenleenbank B.A.)
Royal Bank of Canada
Société Générale
Standard Chartered Bank
State Bank of India
State Street Bank and Trust Company
The International Commercial Bank of China
The Royal Bank of Scotland Plc
The Toronto-Dominion Bank
Taiwan Business Bank
UBS AG
United Overseas Bank Limited
WestLB AG
Building Societies
ABS Building Society Ltd
B & E Ltd
Greater Building Society Ltd
Heritage Building Society Limited
Home Building Society Ltd
Hume Building Society Ltd
IMB Ltd
Lifeplan Australia Building Society Limited
Mackay Permanent Building Society Ltd
Maitland Mutual Building Society Limited
Newcastle Permanent Building Society Ltd
Pioneer Permanent Building Society Limited
The Rock Building Society Limited
Wide Bay Australia Ltd
Credit Unions
Amcor Credit Co-operative Limited
AMP Employees' & Agents Credit Union Limited
Austral Credit Union Limited
Australian Central Credit Union Limited
Australian Defence Credit Union Ltd
Australian National Credit Union Limited
AWA Credit Union Limited
Bananacoast Community Credit Union Ltd
Bankstown City Credit Union Ltd
Berrima District Credit Union Ltd
Big River Credit Union Ltd
Big Sky Credit Union Ltd
Blue Mountains and Riverlands Community Credit Union Ltd
Broadway Credit Union Ltd
Calare Credit Union Ltd
Capital Credit Union Ltd
Capricornia Credit Union Ltd
Carboy (SA) Credit Union Limited
Central Murray Credit Union Limited
Central West Credit Union Limited
Circle Credit Co-operative Limited
Coastline Credit Union Limited
Collie Miners Credit Union Ltd
Combined Australian Petroleum Employees' Credit Union Ltd
Community Alliance Credit Union Limited
Community First Credit Union Limited
Companion Credit Union Limited
Comtax Credit Union Limited
Connect Credit Union of Tasmania Limited
Country First Credit Union Ltd
CPS Credit Union (SA) Ltd
CPS Credit Union Co-operative (ACT) Limited
Credit Union Australia Ltd
Credit Union Home Loans Australia Limited
Credit Union Incitec Pivot Limited
Croatian Community Credit Union Limited
CSR and Rinker Employees Credit Union Limited
Dairy Farmers Credit Union Ltd
Dana Employees Credit Union
Defence Force Credit Union Limited
Discovery Credit Union Ltd
Dnister Ukrainian Credit Co-operative Limited
ELCOM Credit Union Ltd
Electricity Credit Union Ltd
Encompass Credit Union Limited
Ericsson Employees Credit Co-operative Limited
Esso Employees' Credit Union Ltd
Eurobodalla Credit Union Ltd
Family First Credit Union Limited
Fire Brigades Employees' Credit Union Limited
Fire Service Credit Union Limited
Firefighters & Affiliates Credit Co-operative Limited
First Pacific Credit Union Limited
Fitzroy & Carlton Community Credit Co-operative Limited
Flying Horse Credit Union Co-operative Limited
Ford Co-operative Credit Society Limited
Gateway Credit Union Ltd
Geelong & District Credit Co-operative Society Limited
GMH (Employees) Q.W.L. Credit Co-operative Limited
Goldfields Credit Union Ltd
Gosford City Credit Union Ltd
Goulburn Murray Credit Union Co-operative Limited
H.M.C. Staff Credit Union Ltd
Heritage Isle Credit Union Limited
Hibernian Credit Union Limited
Holiday Coast Credit Union Ltd
Horizon Credit Union Ltd
Hoverla Ukrainian Credit Co-operative Ltd
Hunter Mutual Limited
Hunter United Employees' Credit Union Limited
Industries Mutual Credit Union Limited
Intech Credit Union Limited
Island State Credit Union Ltd
Karpaty Ukrainian Credit Union Limited
La Trobe Country Credit Co-operative Limited
La Trobe University Credit Union Co-operative Limited
Laboratories Credit Union Ltd
Latvian Australian Credit Co-operative Society Limited
Lithuanian Co-operative Society (Talka) Limited
Lysaght Credit Union Ltd
M.S.B. Credit Union Limited
MacArthur Credit Union Ltd
Macaulay Community Credit Co-operative Limited
Macquarie Credit Union Limited
Maleny and District Community Credit Union Limited
Manly Warringah Credit Union Ltd
Maritime Workers of Australia Credit Union Ltd
Maroondah Credit Union Ltd
MECU Limited
Media Credit Union Queensland Ltd
Melbourne University Credit Union Limited
Memberfirst Credit Union Limited
N.R.M.A. Employees' Credit Union Ltd
NACOS Credit Union Limited
New England Credit Union Ltd
Newcom Colliery Employees' Credit Union Ltd
North East Credit Union Co-operative Limited
Northern Inland Credit Union Ltd
Nova Credit Union Limited
NSW Teachers Credit Union Ltd
Old Gold Credit Union Co-operative Limited
Orana Credit Union Ltd
Orange Credit Union Limited
Phoenix (NSW) Credit Union Ltd
Pinnacle Credit Union Limited
Plenty Credit Co-operative Limited
Police & Nurses Credit Society Limited
Police Association Credit Co-operative Limited
Police Credit Union Limited
Polish Community Credit Union Ltd
Power Credit Union Limited
Powerstate Credit Union Ltd
Prospect Credit Union Limited
Pulse Credit Union Limited
Qantas Staff Credit Union Limited
Queensland Community Credit Union Limited
Queensland Country Credit Union Ltd
Queensland Police Credit Union Limited
Queensland Professional Credit Union Ltd
Queensland Teachers' Credit Union Limited
Queenslanders Credit Union Limited
RACV Credit Union Limited
Railways Credit Union Limited
Randwick Credit Union Limited
RegionalOne Credit Union Limited
Reliance Credit Union Ltd
Resources Credit Union Limited
RTA Staff Credit Union Limited
Satisfac Direct Credit Union Limited
Savings and Loans Credit Union (S.A.) Ltd
Security Credit Union Ltd
Select Credit Union Ltd
Service One Credit Union Ltd
SGE Credit Union Ltd
Shell Employees' Credit Union Limited
Shoalhaven Paper Mill Employee's Credit Union Ltd
South West Slopes Credit Union Ltd
Southern Cross Credit Union Limited
South-West Credit Union Co-operative Limited
St Mary's Swan Hill Co-operative Credit Society Limited
St Patrick's Mentone Co-operative Credit Society Limited
Statewest Credit Society Limited
Sutherland Credit Union Ltd
Sutherland Shire Council Employees' Credit Union Ltd
Sydney Credit Union Ltd
TAB Credit Union Limited
Tartan Credit Union Ltd
The Broken Hill Community Credit Union Ltd
The Gympie Credit Union Ltd
The Police Department Employees' Credit Union Limited
The Summerland Credit Union Limited
The TAFE and Community Credit Union Limited
The University Credit Society Limited
Traditional Credit Union Limited
TransComm Credit Co-operative Limited
Uni Credit Union Ltd
United Credit Union Limited
Victoria Teachers Credit Union Limited
Wagga Mutual Credit Union Ltd
Warwick Credit Union Ltd
WAW Credit Union Co-operative Limited
Westax Credit Society Ltd
Western City Credit Union Ltd
Woolworths/Safeway Employees' Credit Co-operative Limited
Wyong Council Credit Union Ltd
Yennora Credit Union Ltd
Specialist Credit Card Institutions (SCCIs)
Foreign-owned SCCIs
GE Capital Finance Australia
GE Finance Australasia Pty Ltd
Locally Incorporated SCCIs
MoneySwitch Limited
Other ADIs
These companies are run by industry bodies and provide services (e.g. payments clearing) to member building societies and credit unions.
Australian Settlements Limited
Credit Union Services Corporation (Australia) Limited
Creditlink Services Limited
One ADI that provides general banking services which does not fall into the other categories.
Cairns Penny Savings & Loans Limited

Reporting Form ARF 113.0
Market Risk
Instruction Guide
General directions and notes
Reporting entity1
1By individual agreement with APRA.
For locally incorporated ADIs, data should be prepared for the consolidated group i.e. the global operations of the ADI and all its controlled entities (where relevant), consolidated in accordance with Australian accounting standards.
Foreign ADIs[2] operating through branches in Australia and Specialist Credit Card Institutions (SCCIs) are not required to complete this form.
[2] These instructions and any relevant form are to apply to the Bank of China as if its branch operations in Australia constituted a locally-incorporated bank. Accordingly: (a) the Bank of China is to undertake stand-alone or ‘Licensed ADI’ reporting in respect of the bank’s Australian branch operations, as if those operations constituted a locally-incorporated bank; and (b) ‘Consolidated Group’ reporting for Bank of China is to encompass: (i) those branch operations (as if they constituted a locally-incorporated bank); and (ii) any locally-incorporated subsidiary of the Bank of China.
‘Controlled entities’
This is defined in accordance with accounting standard AASB 1024 ‘Consolidated Accounts’.
The basis of consolidation required in this form is in accordance with the prudential Consolidated ADI Group. The prudential consolidated group should also be determined in accordance with Australian accounting standards, notably AASB 1024 with the following modifications:

Include the following:

all controlled banking entities, securities entities and other financial entities (e.g. finance companies, money market corporations, stockbrokers and leasing companies).

Exclude subsidiary entities involved in the following business activities:

insurance businesses (including friendly societies and health funds);
acting as manager, responsible entity, approved trustee, trustee or similar role in relation to funds management or the securitisation of assets; and
non-financial (commercial) operations.
Reporting period
The form is to be completed as at the last day of the stated reporting quarter. Locally incorporated banks, Special Service Providers, Credit Unions, Cairns Penny Savings & Loans Limited and Building Societies should submit the completed form to APRA within 20 business days after the end of the relevant reporting quarter.
Unit of measurement
Banks, Special Service Providers, Building Societies, Credit Unions and Cairns Penny Savings & Loans Limited are asked to complete the form in millions of Australian dollars rounded to two decimal places.
Amounts denominated in foreign currency are to be converted to AUD in accordance with AASB 1012 ‘Foreign Currency Translation’.
The general requirements of AASB 1012 for translation are:

Foreign currency monetary items outstanding at the reporting date must be translated at the spot rate at the reporting date.
Other items outstanding at the reporting date must not be retranslated subsequent to initial recognition of the transaction.
Monetary items are defined to mean money held and assets and liabilities that are to be received or paid in fixed or determinable amounts of money.
Monetary items arising under foreign currency derivative contracts at the reporting date must be translated as follows:

Where the exchange rate is fixed in the contract, at that fixed exchange rate; and
Where the exchange rate varies, at the spot rate at the reporting date.
Basis of preparation
Capital charges for each relevant component of the market risk capital charge should be reported on this form. The total capital charge for each asset class assessed using the standard method is then calculated by summing the various components. Finally, the total market risk capital charge is to be entered as the sum of the standard method charges for each asset class plus any charge reported under the VaR or Internal Limit approaches. The total market risk capital charge must then be multiplied by a constant factor of 12.5 and reported on ARF 110.0 Capital Adequacy.
References in this Instruction Guide to a Prudential Standard are references to Prudential Standard APS 113 Capital Adequacy: Market Risk and associated guidance notes. For commentary purposes, a box labeled “Comments” has been added to every table.
Specific instructions
Supporting tables
1. Standard method
Interest rate risk
All positions forming part of the trading book in debt or other interest rate-related securities, including interest rate derivatives, forward foreign exchange and quasi-debt securities that behave like debt (refer paragraph 3 of Guidance Note AGN 113.3 The Standard Method), should be reported in Tables 1 and 2.
The total capital requirement for interest rate risk consists of charges for specific risk, general market risk, and interest rate-sensitive options risks.
Table 1: Specific risk
The sum of the market values of individual positions in each issuer category should be reported in the first and second column for short and long positions respectively. In summing the market values within each category, if there is a matched position in the same security (i.e. both the issuer and issue are identical), the matching positions may be offset and omitted from the calculation of specific interest rate risk (refer paragraphs 5, 29, 30 and 32 to 35 of Guidance Note AGN 113.3 The Standard Method).
Specific risk is to be assessed according to the classification of issuer of the security or underlying security in the case of derivative instruments. Issuers are classified into the categories of government, qualifying and other, as defined in paragraphs 7 to 10 of Guidance Note AGN 113.3 The Standard Method. Instruments with issuers in the qualifying category should be further classified according to the residual term to final maturity of the security or underlying security.
The capital charge is calculated as the risk weight multiplied by the gross market value and is reported in the last column of Table 1. The total specific risk charge is also reported in item “A a)” in the Market Risk Summary Report.
Table 2: General market risk
The data to be entered into Table 2 should be calculated according to the methodology detailed in paragraphs 12 to 35 of Guidance Note AGN 113.3 The Standard Method. These calculations should be performed and the results reported on Table 2 separately (without offsetting across currencies) for each currency in which material interest rate exposures are held and in aggregate for all currencies in which there are non-material interest rate exposures. The Prudential Standard allows the choice between three methods for the calculation of general interest rate risk (the maturity, duration and pre-processing methods). The pre-processing method should only be used with APRA approval. For each currency, specify the method used in calculating the capital charge. If more than one method is being used for a currency, report the calculations for each method on a different currency and method combination table. The Prudential Standard allows the offsetting of positions between the duration and pre-processing methods. ADIs performing such offsetting should report those positions (netted across the two methods) as pre-processing positions.
The net long and net short risk weighted positions for each time band should be reported according to the definitions of the bands in Table 2 of Guidance Note AGN 113.3 The Standard Method. Offsetting of positions is allowable according to the requirements set out in paragraphs 32 to 35 of Guidance Note AGN 113.3 The Standard Method.
The total general market risk charge is to be reported in the top line of the final column of Table 2 for each currency and method combination. This is the sum of the net position and vertical and horizontal disallowances (calculated in accordance with paragraphs 12 to 35 of Guidance Note AGN 113.3 The Standard Method).
The total general market risk charge summed across all currencies and methods will be entered in the final row of Table 2 and will also be reported at item “A b)” in the Market Risk Summary Report.
Table 3: Equity position risk
Positions are to be reported on a market-by-market basis, with a separate calculation for each national market in which the ADI holds equities to be reported as a separate line. Equities with listings in more than one market should be reported as positions in the market of their primary listing.
An "equity position" is the net of short and long exposures to an individual company. Specific risk is assessed as the sum of the net short or long exposure to individual companies irrespective of sign.
Positions attracting 8 per cent specific risk charge
The capital charge for specific risk is equal to 8 per cent of the gross position (i.e. the sum of the absolute value of all long equity positions and of all short equity positions). The exceptions to this rule are where:
the portfolio is both liquid and well diversified (refer to paragraphs 39 to 41 of Guidance Note AGN 113.3 The Standard Method);
the position is in an approved index contract (refer to paragraph 47 of Guidance Note AGN 113.3 The Standard Method); and
the ADI is engaged in certain arbitrage transactions (refer to paragraphs 49 to 53 of Guidance Note AGN 113.3 The Standard Method).
The gross value of all positions not eligible for any of these exceptions is to be reported in the second column: “Positions attracting 8% specific risk”.
Positions attracting 4 per cent specific risk charge
A portfolio is both liquid and well diversified if it satisfies the conditions outlined in paragraphs 39 to 41 of Guidance Note AGN 113.3 The Standard Method. The specific risk charge is then equal to 4 per cent of the gross position. The gross value of all positions subject to a 4 per cent specific risk charge is to be reported in the third column: “Positions attracting 4% specific risk”.
Positions attracting 2 per cent specific risk charge
Positions eligible for a 2 per cent specific risk capital charge are set out in paragraphs 47 and 49 to 53 of Guidance Note AGN 113.3 The Standard Method. The gross value of all positions subject to a 2 per cent specific risk charge is to be reported in the fourth column: “Positions attracting 2% specific risk”.
Total specific risk charge
The total specific risk charge is the sum of 8 per cent of column 1, plus 4 per cent of column 2, plus 2 per cent of column 3. This amount is to be reported in the fifth column: “Total Specific Risk Charge”.
Net positions for general market risk
The net position in each market is to be reported in column 6. The net position in each equity market is calculated as the difference between the sum of the long positions and the sum of the short positions. An overall net short position in a market should be indicated by a negative sign.
General market risk charge
The general market risk charge for each market, to be reported in column 7, is 8 per cent of the absolute value of the net position.
Total market risk charge
The total market risk charge is the sum of the value of column 5 (total specific risk charge) and the value of column 7 (general market risk charge). For each market this total is to be reported in column 8: “Total Market Risk Charge”.
The total market risk charge across all countries will equal to the sum of column 7. This capital charge number will be reported as Equity Position Risk (item “B a)”) on the Market Risk Summary Report.
Table 4: Foreign exchange risk
For each foreign currency in which the ADI has positions, report separately the Australian dollar equivalent of the net open position in that currency.
The net open position in a particular currency should be calculated in accordance with paragraphs 57 to 67 of Guidance Note AGN 113.3 The Standard Method. In calculating the net open position in each currency:
include all transactions contracted as at the reporting date (ie both traded and non-traded positions) excluding any structural positions;
forward positions should be valued at current spot market exchange rates or using net present values.
Report the larger of the sum of the net long positions or the sum of the net short positions at box (1).
Report the Australian dollar equivalent of the net open position in gold (including sign) at box (2). This should be calculated in the same way as for foreign currencies. Gold positions (in Australian dollar equivalent amounts) may be segmented into a gold exposure and a USD exposure.
The capital charge will be calculated as 8 per cent of the sum of the absolute values of items 1 and 2. This will also be reported at item “C a)” on the Market Risk Summary Report.
Commodities
ADIs which use the simplified approach to calculate the capital charge for commodities risk should complete Table 5. ADIs which use the maturity ladder approach should complete Table 6.
All commodity positions, both on- and off-balance sheet, which are affected by changes in commodity prices should be included. This includes commodity forwards, commodity futures and commodity swaps. It also includes the delta-equivalent of commodity options (where the delta-plus method for options is used). Commodity derivatives should be converted into notional commodity positions according to the methods set out in paragraph 81 of Guidance Note AGN 113.3 The Standard Method.
Each commodity position should first be expressed in terms of the standard unit of measurement (barrels, kilos, grams, etc) and then converted into Australian dollars using spot rates applying at the close of business on the reporting date (report the Australian dollar figure). If prior approval has been obtained from APRA, positions in foreign currency denominated commodities may be segmented into a commodity exposure and a foreign currency exposure.
The capital charge must be calculated separately for each commodity. Positions in different commodities may not, as a general rule, be offset (refer to paragraph 74 of Guidance Note AGN 113.3 The Standard Method for details of permissible offsetting).
Table 5: Simplified method
List each separate commodity in which your ADI has positions. Report the total short position and the total long position in each commodity.
In the last column report the capital charge for each commodity. This is calculated as 15 per cent of the net open position (the difference between the total short position and the total long position) plus 3 per cent of the gross position (the sum of the absolute values of the total short position and the total long position).
The capital charges for each individual commodity will be summed to give the total capital charge for commodities risk under the simplified method. This will then be reported at item “D a)” on the Market Risk Summary Report.
Table 6: Maturity ladder method
List each separate commodity in which your ADI has positions. In each of the maturity bands, report the total long position and the total short position in each commodity. Physical stocks should be allocated to the first time band. Positions in commodity derivatives should be assigned maturities following the treatment set out in paragraph 81 of Guidance Note AGN 113.3 The Standard Method.
In the last column report the total capital charge for each commodity. The method for calculating the capital charge is outlined in paragraphs 76 to 80 of Guidance Note AGN 113.3 The Standard Method. A separate calculation must be performed for each commodity in which the ADI has a position.
The capital charges for each individual commodity will be summed to give the total capital charge for commodities risk under the maturity ladder method and reported in the last row of Table 6. This will also be reported at item “D b)” on the Market Risk Summary Report.
Table 7: Options - Simplified method
The simplified method may only be used by those ADIs handling a limited range of purchased options. The method requires that options and any associated underlying positions be excluded from the asset class calculations detailed in tables 1 to 6. Instead a separate capital charge is calculated for each option portfolio.
The method for calculating the capital charge on an options position depends on whether the position is covered or naked. Option positions, which are partially covered, should be separated into a fully covered position and a naked position.
For both covered and naked positions, if positions do not fall within the trading book, for example options on certain foreign exchange or commodities positions, ADIs may use the book value rather than market value.
For each asset class (interest rates, equities, foreign exchange and commodities) report the capital charge (refer to paragraphs 91 and 92 of Guidance Note AGN 113.3 The Standard Method) for the following positions separately:
Covered positions: purchased put and long underlying
purchased call and short underlying
Naked positions:          purchased put
   purchased call
The sum of the capital charges for all positions within each asset class will be reported in the totals. These totals for each asset class will then be entered on the Market Risk Summary Report at items “A c)”, “B b)”, “C b)” and “D c)” respectively.
Table 8: Options – Delta-plus method
Those ADIs that have obtained approval from APRA to use the delta-plus method, must complete Table 8.
ADIs using this method must first calculate the delta-equivalent position of each option. The delta-equivalent position is calculated by multiplying the market value of the underlying position by the absolute value of the delta calculated on that position.
For options with interest rate instruments as the underlying, the delta-equivalent position must be included in the positions and capital charge calculations entered in Tables 1 and 2 in accordance with the instructions applicable to interest rate instruments.
For options with equity instruments as the underlying, the delta-equivalent position must be incorporated in Table 3 in the appropriate column as part of a gross position for specific risk depending on whether the underlying instrument attracts an 8 per cent, 4 per cent or 2 per cent specific risk charge. The delta-equivalent position must also be included in Table 3 in the column entitled Net Position for General Market Risk. The specific risk and general market risk treatment should be in accordance with the instructions for Table 3.
For options with foreign exchange or gold as the underlying, the delta-equivalent position must be entered in Table 4 in accordance with reporting instructions applicable to foreign exchange and gold. Note that for an option over a currency pair not involving AUD, two delta-equivalent positions must be entered into Table 4, one corresponding to the currency bought and the other corresponding to the currency sold. For currency pairs involving AUD, only one delta-equivalent position is entered in Table 4 for the foreign currency.
For options with commodities as the underlying, the delta-equivalent position must be slotted into either the simplified method (Table 5) or the maturity ladder method (Table 6). This should be reported in accordance with instructions that apply to commodity risk.
Secondly, ADIs must calculate the gamma impact of each option as detailed in paragraphs 98 to 101 of Guidance Note AGN 113.3 The Standard Method. Total gamma impacts must be calculated and reported separately for options over interest rates, equities, foreign exchange and gold, and commodities respectively in Table 8.
Thirdly, vega impacts must be calculated (using the method set out in paragraphs 102 and 103 of Guidance Note AGN 113.3 The Standard Method) and reported separately in Table 8 for options over interest rates, equities, foreign exchange and gold, and commodities respectively.
Four totals will be calculated in Table 8 by adding the gamma impact and the vega impact for each of the interest rate, equities, foreign exchange and gold, and commodities categories. These four totals will also be entered on the Market Risk Summary Report at items “A d)”, “B c)”, “C c)” and “D d)” respectively.

Contingent loss method
Those ADIs that have obtained approval from APRA to use the contingent loss method must complete tables 9 to 12. The contingent loss method requires exclusion of the options and any associated hedges in the underlying instrument from the asset class calculations in Tables 1 to 6. Instead a separate capital charge is determined. A scenario matrix is constructed that contains changes in the value of the options portfolio and hedges given specified changes in underlying prices and volatility. A capital charge for general market risk is then determined by taking the largest loss that appears in the matrix.
Specific risk charges, for those options where specific risk is present, are to be separately assessed based on the delta-equivalent amount of each option. For options with interest rate instruments as the underlying, the delta-equivalent positions must be included in the positions and capital charge calculations entered in Table 1. For equity options the delta-equivalent position must be included in Table 3 as part of the gross position for specific risk.
Table 9: Contingent loss method - interest rate options
A different scenario matrix must be established for each time band and by each currency (refer to paragraphs 104 to 109 of Guidance Note AGN 113.3 The Standard Method). ADIs that have obtained APRA approval to do so, may base the calculation on a minimum of six sets of time bands.
Specific Instructions
1. For each currency, select the method used in calculating the capital charge.
2. Report the maximum loss figure obtained from the scenario matrix constructed for each time band in each currency.
3. Sum each column to obtain a maximum loss figure for all time bands by each currency. Reported this figure in the top line of the final column for each currency.
4. The total maximum loss in each currency will be summed to obtain a total capital charge. This figure will also be entered in item “A e)” on the Market Risk Summary Report.
Table 10: Contingent loss method – equity options
Report the maximum loss figure obtained from the scenario matrix constructed for each national market (see paragraphs 104 to 109 of Guidance Note AGN 113.3 The Standard Method). The column will be summed to obtain a total capital charge. This figure will also be entered in item “B d)” on the Market Risk Summary Report.
Table 11: Contingent loss method - foreign exchange and gold
Report the maximum loss figure obtained from the scenario matrix constructed for each currency pair and gold (see paragraphs 104 to 109 of Guidance Note AGN 113.3 The Standard Method). The column will be summed to obtain a total capital charge. This figure will also be entered in item “C d)” on the Market Risk Summary Report.
Table 12: Contingent loss method - commodities
Report the maximum loss figure obtained from the scenario matrix constructed for each commodity (see paragraphs 104 to 109 of Guidance Note AGN 113.3 The Standard Method). The column will be summed to obtain a total capital charge. This figure will also be entered in item “D e)” on the Market Risk Summary Report.
2.   Internal model
ADIs granted APRA approval to use the internal model approach must complete Tables 13 and 14. All internal model user ADIs must also complete Tables 18 to 25 relating to stress testing where the ADI has exposure to the relevant underlying market.
ADIs are permitted to use a combination of the internal models approach and the standard methodology provided that a single approach (either internal models or the standard approach) is applied to all material exposures arising within any one risk category (refer paragraphs 35 and 36 of Guidance Note AGN 113.2 The Internal Model Approach). Those ADIs using a combination of internal models and the standard methodology should complete Tables 13 and 14 for those asset classes where an internal model is applied as well as the relevant tables in the standard method section of the reporting form for those asset classes for which a capital charge is calculated using the standard method. The capital charges determined using the internal model approach and the standard approach will be reported on the Market Risk Summary Report and summed.
Specific risk
ADIs whose internal models do not cover specific risk on interest rate related instruments and equities (refer paragraph 22(k) of Guidance Note AGN 113.2 The Internal Model Approach) must complete Table 1 (for specific risk on interest rate instruments) and Table 3 (for specific risk on equity positions) in the standard method section of the reporting form.
ADIs granted APRA approval to use an internal specific risk model covering both idiosyncratic risk and event/default risk (refer paragraphs 43 to 53 of Guidance Note AGN 113.2 The Internal Model Approach) may adopt one of two approaches to reporting their VaR. Firstly, if the ADI has the capacity to separately report specific risk and general market risk amounts it may do so in lines 1 to 3 and lines 6 to 8 of Table 13. Alternatively, if the ADI is not able to separately report specific risk and general market risk amounts then total interest rate risk and total equity risk may be reported using one of the three methods outlined in the section below.
ADIs granted APRA approval to use an internal specific risk model covering idiosyncratic risk but not event/default risk (refer paragraphs 43 to 53 of Guidance Note AGN 113.2 The Internal Model Approach) may adopt one of two approaches to reporting their VaR. Firstly, if the ADI is calculating the specific risk modelling surcharge by separating the specific risk portion of the VaR measure from the model’s estimate of general market risk then the specific and general market risk amounts must be reported separately in lines 1 to 3 and lines 6 to 8 of Table 13. Alternatively, if the ADI is calculating the specific risk modelling surcharge by identifying sub-portfolios that contain specific risk, the ADI must report the VaR amounts for sub-portfolios containing specific risk and those sub-portfolios that do not contain specific risk in lines 4 to 5 and lines 9 to 10 of Table 13.
Total market risk
Depending on the nature and capability of the risk measurement system in place, ADIs using the internal models approach should employ one of the following three methods to calculate a capital charge.
Method one: ADIs using this method calculate a total value-at-risk (VaR) number across those asset classes to which the internal model applies. In calculating this number, ADIs will have discretion to recognise correlations both within and across asset classes.
Method two: ADIs may calculate individual VaR numbers for each asset class separately. Again, ADIs have the option of incorporating into the calculation correlations between instruments within an asset class. The total VaR measure is the sum of the measures for each asset class.
Method three: If an ADI’s risk measurement system is structured in such a way that the ADI has the capacity to calculate VaR measures both across and within asset classes (i.e. a combination of method one and method two) then the ADI should report the VaR numbers determined using both methods. Owing to diversification effects, the capital charge which results from calculating a VaR measure across all asset classes (i.e. method one) will be lower than the capital charge which results from calculating VaR measures for individual asset classes and summing them (i.e. method two). The capital requirement will be based on method one.
Table 13: Value at Risk results
Method one
(all numbers are entered in the row labelled Total)
End of quarter VaR
Enter that VaR number calculated across all asset classes for the last day in the reporting period.
Average VaR over past 60 trading days
Calculate the average daily total VaR measure for the 60 trading days up to and including the last day of the quarter.

Backtesting exceptions
To complete these two columns the most recent 250 days of aggregated profit and loss and VaR data, up to and including the last day in the quarter, is needed (refer paragraphs 54 to 82 of Guidance Note AGN 113.2 The Internal Model Approach). The aggregated data should be that profit and loss and VaR data which applies to all asset classes for which the ADI’s internal model is being used to calculate the capital charge. Using this data, compare each day’s trading outcome (profit or loss) with the corresponding VaR number. If the trading outcome on a particular day is a loss that exceeds the corresponding VaR number for that day then the result is recorded as an exception. Count the number of exceptions that occur over the 250 days.
The Prudential Standard allows ADIs to perform back testing based on either actual or hypothetical profit and loss. All ADIs using internal models must complete at least one of the two back testing columns. Those ADIs that have the capacity to back test using both actual and hypothetical profit and loss must report the results of back testing on both bases.
Scaling factor
The scaling factor consists of the multiplication factor and a plus factor (refer to paragraph 22(j) of Guidance Note AGN 113.2 The Internal Model Approach). The multiplication factor is set for each ADI by APRA, within the range 3 to 5. The plus factor is specified by APRA and relates directly to the quarterly backtesting results (refer paragraphs 54 to 82 of Guidance Note AGN 113.2 The Internal Model Approach).
Scaled average VaR
Multiply the number in column 2 by the number in column 5 to determine the scaled average VaR.
Capital charge
The capital charge, using method one, is the larger of column 1 (the end of quarter VaR) and column 6 (the scaled average VaR).
Method two
(numbers are entered in the rows labelled Interest Rates, Equities, Foreign Exchange and Commodities)
End of quarter VaR
Enter that VaR number calculated for each asset class for the last day in the reporting period.
Average VaR over past 60 trading days
For each asset class, calculate the average daily total VaR measure for the 60 trading days up to and including the last day of the quarter (i.e. the end of quarter VaR number should be included in the calculation).
Backtesting exceptions
To complete these two columns the most recent 250 days of profit and loss and VaR data for each asset class, up to and including the last day in the quarter, is needed (refer paragraphs 54 to 82 of Guidance Note AGN 113.2 The Internal Model Approach). Using this data, for each asset class compare each day’s trading outcome (profit or loss) with the corresponding VaR number. If the trading outcome on a particular day is a loss that exceeds the corresponding VaR number for that day then the result is recorded as an exception. For each asset class, count the number of exceptions that occur over the 250 days.
The Prudential Standard allows ADIs to perform back testing based on either actual or hypothetical profit and loss. All ADIs using internal models must complete at least one of the two back testing columns. Those ADIs that have the capacity to back test using both actual and hypothetical profit and loss must report the results of back testing on both bases.
Scaling factor
The scaling factor consists of the multiplication factor and a plus factor (refer paragraph 22(j) of Guidance Note AGN 113.2 The Internal Model Approach). The multiplication factor is set for each ADI by APRA, within the range 3 to 5. The plus factor is specified by APRA and relates directly to the quarterly backtesting results (refer paragraphs 54 to 82 of Guidance Note AGN 113.2 The Internal Model Approach). For an ADI using method two, APRA may specify different scaling factors for different risk categories if it is determined that the quality of an ADI’s internal model varies across asset classes.
Scaled average VaR
For each asset class, multiply the number in column 2 by the number in column 5 to determine the scaled average VaR.
Capital charge
Calculate the maximum of column 6 (the scaled average VaR number) and column 1 (the end of quarter VaR number) for each asset class. The capital charge is the sum of these maximum values.
Method three
(numbers are entered in the rows labelled Total as well as Interest Rates, Equities, Foreign Exchange and Commodities).
End of quarter VaR
Enter that VaR number calculated across all asset classes and the VaR numbers calculated for each asset class for the last day in the reporting period.
Average VaR over past 60 trading days
Calculate the average daily total VaR measure for the 60 trading days up to and including the last day of the quarter (ie the end of quarter VaR number should be included in the calculation) for each asset class and across all asset classes (i.e. for the total VaR).
Backtesting exceptions
To complete these two columns the most recent 250 days of profit and loss and VaR data for each asset class and in aggregate, up to and including the last day in the quarter, is needed (refer paragraphs 54 to 82 of Guidance Note AGN 113.2 The Internal Model Approach). Using this data, for each asset class and for the aggregate data compare each day’s trading outcome (profit or loss) with the corresponding VaR number. If the trading outcome on a particular day is a loss that exceeds the corresponding VaR number for that day then the result is recorded as an exception. For each asset class and the total, count the number of exceptions that occur over the 250 days.
The Prudential Standard allows ADIs to perform back testing based on either actual or hypothetical profit and loss. All ADIs using internal models must complete at least one of the two back testing columns. Those ADIs that have the capacity to back test using both actual and hypothetical profit and loss must report the results of back testing on both bases.
Scaling factor
The scaling factor consists of the multiplication factor and a plus factor (refer paragraph 22(j) of Guidance Note AGN 113.2 The Internal Model Approach). The multiplication factor is set for each ADI by APRA, within the range 3 to 5. The plus factor is specified by APRA and relates directly to the quarterly backtesting results (refer paragraphs 54 to 82 of Guidance Note AGN 113.2 The Internal Model Approach).
Scaled average VaR
For each asset class and for the total, multiply the number in column 2 by the number in column 5 to determine the scaled average VaR.
Capital charge
The capital charge is based on method one and hence only the row labelled Total needs to be considered. The capital requirement is the larger of column 1 (the end of quarter VaR across asset classes) and column 6 (the scaled average VaR across asset classes).
Table 14: Largest daily losses over the quarter
Enter the five largest daily losses experienced by the total trading book over the reporting period. Enter the losses in order of magnitude with the largest loss in row 1, the second largest loss in row 2, etc. Enter the dates corresponding to each of the losses in the second column. Enter the corresponding VaR number for each loss in the third column (i.e. the 99% one-day VaR number calculated as at the previous business day).
Internal limits method
ADIs whose market risk measurement techniques are consistent with those required for the contingent loss method or the internal models approach may use their internal scenario-based (contingent loss) limits or VaR limits, subject to APRA approval, as the basis for calculating a capital charge for general market risk. An ADI granted approval to use the internal limits method should complete Table 15. The ADI should also complete either Table 16 or Table 17 depending on whether or not aggregate end-of-day exposure (across all asset classes) exceeded the corresponding internal limit on any day during the reporting period. In addition, ADIs using the internal limits method need to perform stress tests as set out in paragraphs 23 to 31 of Guidance Note AGN 113.2 The Internal Model Approach and hence should also complete Tables 18 to 25.Note also that the limits approach may only be used to assess general market risk; specific risk charges on interest rate and equity instruments must be calculated separately using the standard method and reported in Tables 1 and 3 as appropriate.
Table 15: Largest daily levels of limit utilisation over the quarter
To calculate levels of limit utilisation for each day in the reporting period, divide the end-of-day exposure across all asset classes by the corresponding aggregate VaR or contingent loss limit and express the result as a percentage. Enter the five largest percentages in order of magnitude with the largest percentage entered in row 1, the second largest in row 2, etc.
Using the information entered in Table 15, if end-of-day exposure was within limit for each day in the reporting period complete Table 16. Alternatively, if the limit was exceeded during the quarter complete Table 17.
Table 16: If within limit throughout the quarter
Within the limits approach, ADIs may choose one of three approaches to calculate internal limits: the contingent loss method; a VaR model based on the same parameters for the holding period and confidence interval as specified in the internal model approach (i.e. 10 days and 99 per cent (refer paragraph 22 of Guidance Note AGN 113.2 The Internal Model Approach)); or a VaR model based on a different holding period and confidence interval to those specified in the internal model approach.
For ADIs using the contingent loss method or a VaR model based on a 10 day holding period and 99 per cent confidence interval, the resulting limit for each asset class should be entered in the column labelled Internal Limit. The sum of these limits should be entered in the row labelled Total. ADIs using a VaR model based on parameters for the holding period and confidence interval which differ from those required by the internal model approach should first enter these limits for each asset class in the Internal Limits column. The limits should then be re-scaled to obtain 10 day, 99 per cent equivalents. If an ADI specifies internal limits based on a VaR model which uses a 1 day, 95 per cent (two tail) confidence interval, for example, the internal limits should be re-scaled to 10 day, 99 per cent equivalents by multiplying each limit by Ö10 (to take the holding period up to ten days), dividing the limit by 1.96 (to reverse the 95 per cent scaling effect) and then multiplying the result by 2.33 (to arrive at a 99 per cent confidence interval). The total internal limit is then the sum of the re-scaled limit amounts.
For all three methods, the scaling factor consists of a multiplication factor and a plus factor (refer paragraph 22(j) of Guidance Note AGN 113.2 The Internal Model Approach). The multiplication factor is determined by APRA on a case by case basis.
The capital requirement is the product of the total internal limit across all asset classes and the scaling factor.
Backtesting exceptions
To complete this section the most recent 250 days of aggregated profit and loss and VaR data, up to and including the last day in the quarter, is needed (refer paragraphs 54 to 82 of Guidance Note AGN 113.2 The Internal Model Approach). The aggregated data should be that profit and loss and VaR data that applies to all asset classes for which the internal limit method is being used to calculate the capital charge. Using this data, compare each day’s trading outcome (profit or loss) with the corresponding VaR number. If the trading outcome on a particular day is a loss that exceeds the corresponding VaR number for that day then the result is recorded as an exception. Count the number of exceptions that occur over the 250 days.
The Prudential Standard allows ADIs to perform back testing based on either actual or hypothetical profit and loss. All ADIs using the internal limit method must complete at least one of the two back testing rows in Table 16. Those ADIs that have the capacity to back test using both actual and hypothetical profit and loss must report the results of back testing on both bases.
Table 17: If limit exceeded during the quarter
Enter the largest end-of-day exposure experienced across all asset classes over the reporting period. ADIs using a VaR model based on parameters for the holding period and confidence interval which differ from those required by the internal model approach should first re-scale their peak exposure to a 10 day, 99 per cent equivalent.
The scaling factor consists of a multiplication factor and a plus factor (refer to paragraph 22(j) of Guidance Note AGN 113.2 The Internal Model Approach). The multiplication factor is determined by APRA on a case by case basis.
To calculate the capital charge multiply the largest end-of-day exposure by the penalty factor and the scaling factor.
Backtesting exceptions
To complete this section the most recent 250 days of aggregated profit and loss and VaR data, up to and including the last day in the quarter, is needed (refer paragraphs 54 to 82 of Guidance Note AGN 113.2 The Internal Model Approach). The aggregated data should be that profit and loss and VaR data that applies to all asset classes for which the internal limit method is being used to calculate the capital charge. Using this data, compare each day’s trading outcome (profit or loss) with the corresponding VaR number. If the trading outcome on a particular day is a loss that exceeds the corresponding VaR number for that day then the result is recorded as an exception. Count the number of exceptions that occur over the 250 days.
The Prudential Standard allows ADIs to perform back testing based on either actual or hypothetical profit and loss. All ADIs using the internal limit method must complete at least one of the two back testing rows in Table 17. Those ADIs that have the capacity to back test using both actual and hypothetical profit and loss must report the results of back testing on both bases.
Stress testing
All ADIs using internal models, including users of the internal limits approach, are required to complete Tables 18 to 25 where they have positions in the relevant asset/product. It should be noted that the stress test calculations are not part of the calculation of market risk capital requirements.
In each case the ADI should revalue its portfolio for the specified yield or price shifts and report the resultant change in mark-to-market value (both profits and losses). Full revaluation is required rather than estimates of changes in portfolios based on delta, duration, etc.
Tables 20 to 25 specify simultaneous shifts in underlying prices and the implied option volatility. Those ADIs with no option positions in a particular asset class need complete only the middle row of the relevant table (the zero change in volatility row).
All price and volatility scenarios are expressed as proportional shifts, for example, if the AUD/JPY exchange rate volatility is currently 10 per cent, a scenario of a 100 per cent increase corresponds to the volatility level increasing to 20 per cent; similarly a 50 per cent fall scenario implies that the exchange rate volatility would move to 5 percent.
Table 18: Yield curve scenarios
All positions forming part of the trading book in debt or other interest rate related securities must be included in the stress test calculations. Using the scenarios set out in Table 18, separate stress test results should be presented (in a separate row) for positions in each material currency. Positions in immaterial currencies need not be included in the stress testing scenarios. Within each material currency ADIs may net across all positions when applying the stress scenarios. In applying these yield curve shifts, ADIs should use the same interpolation method used within their internal model to obtain intermediate points on the yield curve.
It should be noted that the stress tests are expressed in terms of proportional changes in interest rates. An example of the yield curves that would result from the two scenarios, given a hypothetical initial yield curve, is shown in the table below.

Cash

90 days

180 days

1 year

3 years

5 years

10 years

15 years

Hypothetical initial yield curve

5.40

5.00

5.10

5.30

5.60

5.90

6.40

6.60

Yield curve scenario 1 (Yield x 1.2)

6.48

6.00

6.12

6.36

6.72

7.08

7.68

7.92

Yield curve scenario 2 (Yield x 0.8)

4.32

4.00

4.08

4.24

4.48

4.72

5.12

5.28

Table 19: Interest rate volatility scenarios
Those ADIs with interest rate options must complete this table. Separate stress results should be presented for interest rate options in different material currencies. Within each currency ADIs may net across all options. Positions in immaterial currencies need not be included in the stress testing scenarios.
Table 20: Equity scenarios
All equity positions within the trading book must be included in the stress test portfolio revaluations. In assessing the change in portfolio value arising from the prespecified scenarios, ADIs may net all positions within each national market (refer paragraph 36 of Guidance Note AGN 113.3 The Standard Method). A separate scenario matrix should be completed for each national market. In the column representing a negative change in volatility, only the entry corresponding to a zero per cent change in price needs to be filled out. The changes in price in the first column should be -50%, -25%, 0%, +10%, +20%.
Table 21: Exchange rate scenarios
All exchange rate sensitive positions (as specified in paragraph 57 of Guidance Note AGN 113.3 The Standard Method) must be included in the stress test portfolio revaluations. Positions in gold, however, should be excluded.
A separate scenario matrix should be completed for each material currency. For example, the USD scenario should include all spot and forward positions in USD (as specified in paragraph 57(a) to (e) of Guidance Note AGN 113.3 The Standard Method), options on USD/AUD and options on USD against all non-AUD currencies. A decrease in price should be interpreted as a depreciation in the USD. Similarly for the other currency scenarios a decrease in price should be interpreted as a depreciation in the specified currency. No separate AUD scenario matrix is needed.
In the column representing a negative change in volatility, only the entry corresponding to a zero per cent change in price needs to be filled out. The changes in price in the first column should be -20%, -10%, 0%, +10%, +20%.
Table 22: Gold and other precious metals scenarios
All positions in gold and other precious metals (including silver, platinum and palladium) must be included in the stress test portfolio revaluations. The price shifts should be applied to each commodity separately; a separate scenario matrix should be completed for each commodity. In assessing the change in portfolio value for each commodity, positions of differing maturity may be netted. In the column representing a negative change in volatility, only the entry corresponding to a zero per cent change in price needs to be filled out. The changes in price in the first column should be -30%, -15%, 0%, +15%, +30%.
Table 23: Base metals scenarios
All positions in base metals (including copper, aluminium, zinc, nickel and tin) must be included in the stress test portfolio revaluations. The price shifts should be applied to each commodity separately; a separate scenario matrix should be completed for each base metal. In assessing the change in portfolio value for each base metal, positions of differing maturity may be netted. In the column representing a negative change in volatility, only the entry corresponding to a zero per cent change in price needs to be filled out. The changes in price in the first column should be -50%, -25%, 0%, +25%, +50%.
Table 24: Soft commodities scenarios
All positions in soft commodities (such as wool, wheat, corn, and sugar) must be included in the stress test portfolio revaluations. The price shifts should be applied to each commodity separately; a separate scenario matrix should be completed for each commodity. In assessing the change in portfolio value for each commodity, positions of differing maturity may be netted. In the column representing a negative change in volatility, only the entry corresponding to a zero per cent change in price needs to be filled out. The changes in price in the first column should be -30%, -15%, 0%, +20%, +40%.
Table 25: Energy commodity scenarios
All positions in energy commodities (including oil, gas, and electricity) must be included in the stress test portfolio revaluations. The price shifts should be applied to each commodity separately; a separate scenario matrix should be completed for each energy commodity. In assessing the change in portfolio value for each commodity, positions of differing maturity may be netted. In the column representing a negative change in volatility, only the entry corresponding to a zero per cent change in price needs to be filled out. The changes in price in the first column should be -40%, -20%, 0%, +20%, +40%.
Note on References to Accounting Standards
This Note is about references in these instructions to an accounting standard or accounting standards, e.g. where the instructions say that something must be done in accordance with a particular AASB or international accounting standard, or must be done in accordance with the accounting standards (however described) generally.
Where you see such a reference, you must read it as meaning the version of the accounting standard, or versions of the accounting standards, applying to reporting periods (within the meaning of the accounting standards) beginning immediately before 1 January 2005.
Accordingly, the new AASB standards for 2005 are not to be applied.
Similarly, a reference to principles or conventions (however described) governing an accounting procedure or treatment shall be taken to refer to principles or conventions applicable in relation to reporting periods (within the meaning of the accounting standards) that began immediately before 1 January 2005.

Cash	90 days	180 days	1 year	3 years	5 years	10 years	15 years
Hypothetical initial yield curve	5.40	5.00	5.10	5.30	5.60	5.90	6.40	6.60
Yield curve scenario 1 (Yield x 1.2)	6.48	6.00	6.12	6.36	6.72	7.08	7.68	7.92
Yield curve scenario 2 (Yield x 0.8)	4.32	4.00	4.08	4.24	4.48	4.72	5.12	5.28