Excise Regulations 1925 (Amendment) (Cth)
STATUTORY RULES.
REGULATIONS UNDER THE EXCISE ACT 1901-1947.*
I,
THE GOVERNOR-GENERAL in and over the Commonwealth of Australia, acting with the
advice of the Federal Executive Council, hereby make the following Regulations
under the
Dated this twenty–first day of July, 1948.
W. J. McKell
Governor-General.
By His Excellency’s Command,
(
Minister of State for Trade and Customs.
Amendments of the Excise Regulations 1925
1. Regulation 40 of the Excise Regulations 1925 is repealed and the following regulation inserted in its stead:—
“ Packages of Tobacco and Snuff.
“ 40.—(1.) Tobacco, other than cut tobacco, shall not be put up in packages containing less than 1 lb. net weight each and the manufacturer shall mark each such package with—
(a) (i) the name of the manufacturer and the address of the manufacturer which shall include the word ‘ Australia ’; or
(ii) the factory number and State number and the words ‘ Made in Australia ’ or words, approved by the Collector, indicating that the goods have been made in Australia ;
(
b ) the net weight of the contents when packed ;(
c ) any additional markings approved by the Collector; and(
d ) when required by the Collector, a consecutive number.
*
Notified in the
Statutory Rules 1925, No. 181, as amended by Statutory Rules 1926, No. 70; 1928, No. 131; 1929 Nos. 74, 92 and 97; 1930, No. 71; 1931, Nos. 25 and 43; 1932, Nos. 13, 51, 105 and 129; 1933, Nos. 37 and 103; 1934, Nos. 9, 65 and 76; 1936, Nos. 26, 56 and 99; 1939, Nos. 5, 39, 60, 121 and 169; 1940, Nos. 17 and 48; 1941, Nos. 313; 1942, Nos. 291, 335 and 387; 1943, Nos. 22 and 140; 1944, No. 173; 1945, No. 103; 1946, No. 89; 1947, Nos. 28 and 85; and 1948, No. 36.
2777.—Price 3d. 12/28.5.1948.
“ (2.) The manufacturer shall mark each plug or piece of manufactured tobacco contained in the package with—
(
a )the name of the manufacturer and the address of the manufacturer which shall include the word ‘ Australia ’; or(
b )the factory number and State number and the words ‘ Made in Australia ’ or words, approved by the Collector, indicating that the goods have been made in Australia.
“ (3.) In marking the factory number and State number the factory number shall be
placed directly above the State number, and within a circle, thus , or in a diamond
or triangle, and each figure shall be not less than half an inch in height in the case of packages and not less than one-sixteenth of an inch in height in the case of plugs and pieces.”.
“ 42.—(1.) The manufacturer shall mark small tins or packets containing cut tobacco or snuff, and the immediate outer packages containing small tins or packets with—
(
a ) (i) the name of the manufacturer and the address of the manufacturer which shall include the word ‘ Australia ’; or(ii) the factory number and State number and the words ‘ Made in Australia ’ or words, approved by the Collector, indicating that the goods have been made in Australia ;
(
b ) the net weight of the contents when packed; and(
c ) any additional markings approved by the Collector.
“ (2.) The marking of the net weight shall be applied in a prominent position and must appear in conjunction with other markings.
“ (3.) Packages containing cut tobacco in bulk shall be marked as prescribed in sub-regulation (1.) of this regulation and in. addition shall be marked with the gross weight and, when required by the Collector, a consecutive number.
“ (4.) In marking the factory number and State number the factory number shall be placed
directly above the State number and within a circle, thus , or in a diamond or
triangle, and each figure shall be not less than half an inch in height in the case of packages and not less than one-sixteenth of an inch in height in the case of small tins and packets.”.
“ 44.—(1.) The manufacturer shall mark small packets and boxes containing cigars with—
(
a )(i) the name of the manufacturer and the address of the manufacturer which shall include the word ‘ Australia ’; or(ii) the factory number and State number and the words ‘ Made in Australia ’ or words, approved by the Collector, indicating that the goods have been made in Australia ;
(
b ) the number of cigars contained in the packet or box ;(
c ) the brand or make of cigar; and(
d ) any additional markings approved by the Collector.
“ (2.) The immediate outer packages containing small packets or boxes shall be marked as prescribed in the last preceding sub-regulation and in addition shall be marked with the number of cigars contained in the packages.
“ (3.) In marking the factory number and State number the factory number shall
be placed directly above the State number and within a circle, thus , triangle, and
each figure shall be not less than half an inch in height in the case of immediate outer packages and not less than one-eighth of an inch in height in the case of small packets and boxes.
“ 47.—(1.) The manufacturer shall mark small tins, packets or boxes containing cigarettes with—
(a) (i) the name of the manufacturer and the address of the manufacturer which shall include the word ‘ Australia ’; or
(ii) the factory number and State number and the words “ Made in Australia ’ or words, approved by the Collector, indicating that the goods have been made in Australia ;
(
b ) the brand or make of cigarette; and(
c ) any additional markings approved by the Collector.
“ (2.) The immediate outer packages containing small tins, packets or boxes shall be marked as prescribed in the last preceding sub-regulation and in addition shall be marked with, the number of cigarettes contained in the packages.
“ (3.) In marking the factory number and State number the factory number shall be
placed directly above the State number, and within a circle, thus , or in a diamond
or triangle, and each figure shall be not less than half an inch in height in the case of immediate outer packages and not loss than one-sixteenth of an inch in height in the case of small tins, packets or boxes.”.
“48.—(1.) The manufacturer shall mark every outside package which contains small packages of manufactured tobacco, cut tobacco, cigars, cigarettes or snuff with—
(
a ) (i) the name of the manufacturer and the address of the manufacturer which shall include the word ‘Australia ’; or(ii) the factory number and State number and the words ‘ Made in Australia ’ or words, approved by the Collector, indicating that the goods have been made in Australia ;
(
b ) the gross weight of the package ;(
c ) any additional markings approved by the Collector ; and(
d ) when required by the Collector a consecutive number.
“ (2.) In marking the factory number and State number on outside packages the factory number shall be placed directly
above the State number and within a circle, thus , or in a diamond or triangle,
and each figure shall not be less than half an inch in height.”.
“
209aa. For the purposes of the
last four preceding regulations ‘ public holiday ’ means any day observed as a
holiday in the Public Service of the Commonwealth in pursuance of section
seventy-six of the
By Authority: L. F. Johnston, Commonwealth Government Printer, Canberra.
0
0
0