Electricity Safety Act 1945 Electricity Safety (Equipment Efficiency) Amendment (Registration and Labelling) Regulation 2000 (2000-436) [GG No 103 of 11.8.2000, p 7527] (NSW)
2000 No 436
| Electricity Safety (Equipment | New South Wales |
Efficiency) Amendment (Registration
and Labelling) Regulation 2000
under the
Electricity Safety Act 1945
His Excellency the Governor, with the advice of the Executive Council, has made the following Regulation under the Electricity Safety Act 1945.
KIM YEADON, M.P.,
Minister for Energy
Explanatory note
The object of this Regulation is to amend the Electricity Safety (Equipment Efficiency) Regulation 1999 so as to prescribe new standards of energy efficiency and performance for certain electrical articles and to prescribe new standards for the registration and labelling of such articles. The regulation also provides that the requirement that certain electrical articles must not be sold unless they are registered does not apply to the sale of second-hand articles.
This Regulation is made under the Electricity Safety Act 1945, including sections
21A and 37 (the general power to make regulations).
| Published in Gazette No 103 of 11 August 2000, page 7527 | Page 1 |
| [8] | |
| 2000 No 436 | |
| Clause 1 | Electricity Safety (Equipment Efficiency) Amendment (Registration and Labelling) Regulation 2000 |
Electricity Safety (Equipment Efficiency) Amendment
(Registration and Labelling) Regulation 2000
1 Name of Regulation
This Regulation is the Electricity Safety (Equipment Efficiency)
Amendment (Registration and Labelling) Regulation 2000.
2 Commencement
This Regulation commences on 11 August 2000.
3 Amendment of Electricity Safety (Equipment Efficiency) Regulation 1999
The Electricity Safety (Equipment Efficiency) Regulation 1999 is amended as set out in Schedule 1.
4 Notes
The explanatory note does not form part of this Regulation.
2000 No 436
Electricity Safety (Equipment Efficiency) Amendment (Registration and
Labelling) Regulation 2000
| Amendments | Schedule 1 |
| Schedule 1 | Amendments |
(Clause 3)
[1] Clause 5 (1A)
Insert after clause 5 (1):
(1A) Until the end of 30 September 2000, a reference to the relevant standard in subclause (1) includes a reference to the standard indicated in Schedule 2 (as in force immediately before 11 August 2000) as being applicable to the electrical article concerned.
[2] Clause 7 (7)
Insert after clause 7 (6):
(7) An application for registration of an electrical article listed in Schedule 2 may be made, until the end of 31 August 2000, as if a reference to the relevant standard in subclause (2) is a reference to the standard indicated in Schedule 2 (as in force immediately before 11 August 2000) as being applicable to the electrical article concerned. (8) Despite clause 11, the Corporation can only register an electrical article that is the subject of an application referred to in subclause (7) for a term that does not extend beyond 30 September 2000.
(9) Without limiting subclause (6), the Corporation may refund all or part of the fee paid in relation to an application referred to in subclause (7) if the Corporation considers that the circumstances warrant it.
[3] Clause 14 Sale of electrical articles
Insert at the end of the clause:
(2) This clause applies in respect of the sale of new articles, whether by wholesale or retail, but does not apply to the sale of second-hand articles.
2000 No 436
Electricity Safety (Equipment Efficiency) Amendment (Registration and
Labelling) Regulation 2000
| Schedule 1 | Amendments |
[4] Clause 15 Electrical articles to be appropriately labelled when sold
Insert after clause 15 (3):
(4) However, a person does not commit an offence against subclause (1) by selling an electrical article on which an approved energy efficiency label is displayed in accordance with Part 2 of the previous relevant standard if the sale occurs:
(a) in the case of a clothes washing machine, dishwasher, refrigerating appliance or rotary clothes dryer that has not been used for display purposes and is existing packaged stock as at 1 October 2000—before 1 October 2001, (b) in the case of a room airconditioner that has not been used for display purposes and is existing packaged stock as at 1 October 2000—before 1 October 2002, (c) in any other case—before 1 October 2000. (5) In subclause (4), previous relevant standard means the standard indicated in Schedule 2 (as in force immediately before 11 August 2000) as being applicable to the electrical article concerned.
[5] Clause 16 Use of display fronts
Insert at the end of clause 16:
(2) Until the end of 30 September 2000, a reference to the relevant standard in subclause (1) includes a reference to the standard indicated in Schedule 2 (as in force immediately before 11 August 2000) as being applicable to the electrical article concerned.
[6] Clause 17 Approval of energy efficiency label
Insert after clause 17 (2):
(3)
Until the end of 30 September 2000, a reference to the relevant standard in subclause (2) includes a reference to the standard indicated in Schedule 2 (as in force immediately before 11 August 2000) as being applicable to the electrical article concerned.
2000 No 436
Electricity Safety (Equipment Efficiency) Amendment (Registration and
Labelling) Regulation 2000
| Amendments | Schedule 1 |
[7] Clause 24 Savings and transitional provisions
Insert “the end of” after “until” in clause 24 (1).
[8] Schedule 2
Omit the Schedule. Insert instead:
Schedule 2 Standards for electrical articles that
require registration and labelling (Clause 3 (1))
Article Relevant standard Clothes washing machine Australian/New Zealand Standard,
“Performance of household electricalappliances—Clothes washing machines—Part 1:
Energy consumption and performance”,
AS/NZS 2040.1:1998, and Australian/New
Zealand Standard, “Performance of household
electrical appliances—Clothes washing
machines—Part 2: Energy labelling
requirements”, AS/NZS 2040.2:2000.Dishwasher Australian/New Zealand Standard,
“Performance of household electricalappliances—Dishwashers—Part 1: Energy
consumption and performance”, AS/NZS
2007.1:1998 and Australian/New Zealand
Standard, “Performance of household electrical
appliances—Dishwashers—Part 2: Energy
labelling requirements”, AS/NZS 2007.2:2000.Refrigerating appliance Australian/New Zealand Standard,
“Performance of household electricalappliances—Refrigerating appliances—Part 1:
Energy consumption and performance”,
AS/NZS 4474.1:1997, and Australian/New
Zealand Standard, “Performance of household
electrical appliances—Refrigerating
appliances—Part 2: Energy labelling and
minimum energy performance standard
requirements”,
AS/NZS 4474.2:2000.
2000 No 436
Electricity Safety (Equipment Efficiency) Amendment (Registration and
Labelling) Regulation 2000
| Schedule 1 | Amendments |
Article Relevant standard Room airconditioner Australian/New Zealand Standard,
“Performance of household electricalappliances—Room airconditioners—Part 1.1:
Non-ducted airconditioners and heat
pumps—Testing and rating for performance”,
AS/NZS 3823.1.1:1998, and Australian/New
Zealand Standard, “Performance of household
electrical appliances—Room
airconditioners—Part 2: Energy labelling
requirements”, AS/NZS 3823.2:2000.Rotary clothes dryer Australian/New Zealand Standard,
“Performance of household electricalappliances—Rotary clothes dryers—Part 1:
Energy consumption and performance”,
AS/NZS 2442.1:1996, and Australian/New
Zealand Standard, “Performance of household
electrical appliances—Rotary clothes
dryers—Part 2: Energy labelling requirements”,
AS/NZS 2442.2:2000.
BY AUTHORITY
0
0
0