Defence and Strategic Goods List Amendment 2010 (Cth)
Defence and Strategic Goods List Amendment 2010
I, John Faulkner, Minister for Defence, make this instrument under paragraph 112 (2A) (aa) of the Customs Act 1901.
Dated 21 April 2010
JOHN FAULKNER
Minister for Defence
1 Name of instrument
This instrument is the Defence and Strategic Goods List Amendment 2010.
2 Commencement
This instrument commences on the day after it is registered on the Federal Register of Legislative Instruments.
3 Amendment of Defence and Strategic Goods List
For paragraph 112 (2A) (aa) of the Customs Act 1901, the Defence and Strategic Goods List, mentioned in regulation 13E of the Customs (Prohibited Exports) Regulations 1958, is amended as set out in Schedule 1.
Note Under regulation 13E of the Customs (Prohibited Exports) Regulations 1958, the Defence and Strategic Goods List is recognised as part of Australia’s export controls.
Schedule 1 Amendment of Defence and Strategic Goods List
(section 3)
[1] Defence and Strategic Goods List
substitute
DEFENCE AND STRATEGIC GOODS LIST
November 1996
PREFACE
The Defence and Strategic Goods List (DSGL) is identified in regulation 13E of the Customs (Prohibited Exports) Regulations 1958 as the document titled ‘Defence and Strategic Goods List’:
(a) formulated and published for the purpose of paragraph 112 (2A) (aa) of the Customs Act 1901 by the Minister for Defence; and
(b) dated November 1996;
as amended by the Minister for Defence and in force from time to time.
Goods included in the list may not be exported from Australia unless a licence or permission has been granted by the Minister or an authorised person and that licence or permission is produced to a Collector of Customs before exportation: regulation 13E of the Customs (Prohibited Exports) Regulations 1958.
The DSGL was first published in 1996 when the Customs (Prohibited Exports) Regulations were consolidated and revised as a result of an Australian National Audit Office review of the Defence export control activity.
The DSGL includes equipment, assemblies and components, associated test, inspection and production equipment, materials, software and technology and is divided into two parts.
PART 1 covers defence and related goods — those goods and technologies designed or adapted for use by armed forces or goods that are inherently lethal. These goods include:
·Military Goods — those goods or technology that is designed or adapted for military purposes including parts and accessories thereof.
·Non Military Lethal Goods (NMLG) — that equipment that is inherently lethal, incapacitating or destructive such as non‑military firearms, non‑military ammunition and commercial explosives and initiators.
PART 2 covers those goods that have a dual use. Dual‑use goods comprise equipment and technologies developed to meet commercial needs but which may be used either as military components or for the development or production of military systems or weapons of mass destruction. This part is further subdivided into and is made up of the following 10 categories:
· Category 0 — Nuclear Materials;
· Category 1 — Materials, Chemicals, Microorganisms and Toxins;
· Category 2 — Materials Processing;
· Category 3 — Electronics;
· Category 4 — Computers;
· Category 5 — Telecommunications and Information Security;
· Category 6 — Sensors and Lasers;
· Category 7 — Navigation and Avionics;
· Category 8 — Marine;
· Category 9 — Aerospace and Propulsion.
The DSGL is amended from time to time to reflect changes in the various multilateral non‑proliferation and export control regimes of which Australia is a member.
INTENTIONALLY BLANK
NOTES
GENERAL NOTES
1. The Notes, Technical Notes and Nota Bene (N.B.) appearing in the Defence and Strategic Goods List form an integral part of the control text.
2.The index at the end of the Defence and Strategic Goods List is provided for guidance only and does not form part ofthe control text.
3.The object of the controls contained in the Defence and Strategic Goods List should not be defeated by the export of any non‑controlled goods (including plant) containing one or more controlled components when the controlled component or components are the principal element of the goods and can feasibly be removed or used for other purposes.
N.B.: In judging whether the controlled component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know‑how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured.
4.Goods specified in the Defence and Strategic Goods List include both new and used goods.
5.Terms in “quotations” are defined terms. Refer to the “Definitions of Terms” section of the Defence and Strategic Goods List. Words and terms appearing under “Definitions of Terms”, if used in their undefined forms, take their common or dictionary meanings.
PART 1 — MUNITIONS LIST
ML 8
Specially formulated pharmaceutical products containing ML8 materials are not controlled.
ML 10
Absence of items from the Munitions List and absence of configuration for military use would mean that an aircraft would not be considered military.
PART 2 — DUAL‑USE GOODS AND TECHNOLOGIES
General Technology Note
The transfer of “technology” according to the General Technology Note, for “production” or “development” of items on this list shall be treated with vigilance.
General Technology Note
Controls on intangible “technology” are to be exercised as far as the scope of legislation will allow.
General Software Note
The transfer of “software”, for “production” or “development” of items on this list shall be treated with vigilance in accordance with national policies and the aims of this regime.
Source Code
Taking into account national practices and legislation , Participating States agree that “source code” items are controlled either by “software” or by “software” and “technology” controls, except when such “source code” items are explicitly decontrolled.
Medical equipment
Equipment specially designed for medical end‑use that incorporates an item controlled in the Dual‑Use List is not controlled.
Category 9
“Development” or “production” “technology” controlled by 9E for gas turbine engines remains controlled when the “technology” is used for repair, rebuild and overhaul. Excluded from control are: technical data, drawings or documentation for maintenance activities directly associated with calibration, removal or replacement of damaged or unserviceable line replaceable units, including replacement of whole engines or engine modules.
Australia’s export control legislation on the intangible transfers of “software” and “technology” is the Weapons of Mass Destruction (Prevention of Proliferation) Act 1995. The object of this Act is to ensure that goods are not supplied or exported, and services are not provided, in circumstances where the goods will or may be used in, or the services will or may assist a Weapons of Mass Destruction (WMD) program.
A WMD program means a plan or program for the development, production, acquisition or stockpiling of nuclear, biological or chemical weapons or missiles capable of delivering such weapons.
The provision of services includes doing anything that confers a benefit on, grants a right or privilege to, provides a facility for, or otherwise assists, someone.
INTENTIONALLY BLANK
DEFINITIONS OF TERMS
Definitions of terms between ‘single quotation marks’ are given in a Technical Note to the relevant item.
Definitions of terms between “double quotation marks” are as follows:
N.B.: Category references are given in brackets after the defined term.
“Accuracy” (2 6), usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value.
“Active flight control systems” (7) are systems that function to prevent undesirable “aircraft” and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control.
“Active pixel” (6 8) is a minimum (single) element of the solid state array which has a photoelectric transfer function when exposed to light (electromagnetic) radiation.
“Adapted for use in war” (1 ML7) means any modification or selection (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) designed to increase the effectiveness in producing casualties in humans or animals, degrading equipment or damaging crops or the environment.
“Adjusted Peak Performance” (4) is an adjusted peak rate at which “digital computers” perform 64‑bit or larger floating point additions and multiplications, and is expressed in Weighted TeraFLOPS (WT) with units of 1012 adjusted floating point operations per second.
N.B.: See Category 4, Technical Note.
“Additives” (ML8) means substances used in explosive formulations to improve their properties.
“Aircraft” (1 7 9 ML8 ML9 ML10) means a fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt‑wing airborne vehicle.
N.B.: See also “civil aircraft”.
“All compensations available” (2) means after all feasible measures available to the manufacturer to minimise all systematic positioning errors for the particular machine‑tool model are considered.
“Allocated by the ITU” (3 5) means the allocation of frequency bands according to the current edition of the ITU Radio Regulations for primary, permitted and secondary services.
N.B.: Additional and alternative allocations are not included.
“Angle random walk” (7) means the angular error build up with time that is due to white noise in angular rate. (IEEE STD 528‑2001)
“Angular position deviation” (2) means the maximum difference between angular position and the actual, very accurately measured angular position after the workpiece mount of the table has been turned out of its initial position (Reference: VDI/VDE 2617, Draft: ‘Rotary tables on coordinate measuring machines’).
“APP” (4) is equivalent to “Adjusted Peak Performance”.
“Asymmetric algorithm “ (5) means a cryptographic algorithm using different, mathematically‑related keys for encryption and decryption.
N.B.: A common use of “asymmetric algorithms” is key management.
“Automatic target tracking” (6) means a processing technique that automatically determines and provides as output an extrapolated value of the most probable position of the target in real time.
“Average output power” (6) means the total “laser” output energy in joules divided by the “laser duration” in seconds.
“Basic gate propagation delay time” (3) means the propagation delay time value corresponding to the basic gate used in a “monolithic integrated circuit”. For a ‘family’ of “monolithic integrated circuits”, this may be specified either as the propagation delay time per typical gate within the given ‘family’ or as the typical propagation delay time per gate within the given ‘family’.
Technical Notes:
1. “Basic gate propagation delay time” is not to be confused with the input/output delay time of a complex “monolithic integrated circuit”.
2. ‘Family’ consists of all integrated circuits to which all of the following are applied as their manufacturing methodology and specifications except their respective functions:
a. The common hardware and software architecture;
b. The common design and process technology; and
c. The common basic characteristics.
“Basic scientific research” (GTN NTN) means experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena or observable facts, not primarily directed towards a specific practical aim or objective.
“Bias” (accelerometer) (7) means the average over a specified time of accelerometer output measured at specified operating conditions that has no correlation with input acceleration or rotation. “Bias” is expressed in [m/s2, g]. (IEEE STD 528‑2001) (Micro g equals 1x10‑6 g).
“Bias” (gyro) (7) means the average over a specified time of gyro output measured at specified operating conditions that has no correlation with input rotation or acceleration. “Bias” is typically expressed in degrees per hour (deg/hr). (IEEE STD 528‑2001).
“Biocatalysts “(ML7 ML22) means enzymes for specific chemical or biochemical reactions or other biological compounds which bind to and accelerate the degradation of CW agents.
Technical Note:
‘Enzymes’ means “biocatalysts” for specific chemical or biochemical reactions.
“Biopolymers” (ML7 ML22) means biological macromolecules as follows:
a. Enzymes for specific chemical or biochemical reactions;
b. Antibodies, monoclonal, polyclonal or anti‑idiotypic;
c. Specially designed or specially processed receptors;
Technical Notes:
1. ‘Anti‑idiotypic antibodies’ means antibodies which bind to the specific antigen binding sites of other antibodies;
2. ‘Monoclonal antibodies’ means proteins which bind to one antigenic site and are produced by a single clone of cells;
3. ‘Polyclonal antibodies’ means a mixture of proteins which bind to the specific antigen and are produced by more than one clone of cells;
4. ‘Receptors’ means biological macromolecular structures capable of binding ligands, the binding of which affects physiological functions.
“Camming” (2), or axial displacement, means axial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle faceplate, at a point next to the circumference of the spindle faceplate (Reference: ISO 230/1 1986, paragraph 5.63).
“Carbon fibre preforms” (1) means an ordered arrangement of uncoated or coated fibres intended to constitute a framework of a part before the “matrix” is introduced to form a “composite”.
“CE” (4) is equivalent to “computing element”.
“CEP” (circle of equal probability) (7) is a measure of accuracy; the radius of the circle centred at the target, at a specific range, in which 50% of the payloads impact.
“Chemical laser” (6) means a “laser” in which the excited species is produced by the output energy from a chemical reaction.
“Chemical mixture” (1) means a solid, liquid or gaseous product made up of two or more components which do not react together under the conditions under which the mixture is stored.
“Circulation‑controlled anti‑torque or circulation controlled direction control systems” (7) are systems that use air blown over aerodynamic surfaces to increase or control the forces generated by the surfaces.
“Civil aircraft” (1 7 9 ML10) means those “aircraft” listed by designation in published airworthiness certification lists by the civil aviation authorities to fly commercial civil internal and external routes or for legitimate civil, private or business use.
N.B.: See also “aircraft”.
“Commingled” (1) means filament to filament blending of thermoplastic fibres and reinforcement fibres in order to produce a fibre reinforcement “matrix” mix in total fibre form.
“Comminution” (1) means a process to reduce a material to particles by crushing or grinding.
“Common channel signalling” (5) is a signalling method in which a single channel between exchanges conveys, by means of labelled messages, signalling information relating to a multiplicity of circuits or calls and other information such as that used for network management.
“Communications channel controller” (4) means the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.
“Compensation systems” (6) consist of the primary scalar sensor, one or more reference sensors (e.g., vector magnetometers) together with software that permit reduction of rigid body rotation noise of the platform.
“Composite” (1 2 6 8 9) means a “matrix” and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes.
“Compound rotary table” (2) means a table allowing the workpiece to rotate and tilt about two non‑parallel axes, which can be coordinated simultaneously for “contouring control”.
“III/V compounds” (3) means polycrystalline or binary or complex monocrystalline products consisting of elements of groups IIIA and VA of Mendeleyev’s periodic classification table (e.g., gallium arsenide, gallium‑aluminium arsenide, indium phosphide).
“Computing element” (“CE”) (4) means the smallest computational unit that produces an arithmetic or logic result.
“Contouring control” (2) means two or more “numerically controlled” motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated (ref. ISO/DIS 2806 ‑ 1980).
“Critical temperature” (1 3 6) (sometimes referred to as the transition temperature) of a specific “superconductive” material means the temperature at which the material loses all resistance to the flow of direct electrical current.
“Cryptography” (5) means the discipline which embodies principles, means and methods for the transformation of data in order to hide its information content, prevent its undetected modification or prevent its unauthorised use. “Cryptography” is limited to the transformation of information using one or more ‘secret parameters’ (e.g., crypto variables) or associated key management.
Technical Note:
‘Secret parameter’: a constant or key kept from the knowledge of others or shared only within a group.
“CW laser” (6) means a “laser” that produces a nominally constant output energy for greater than 0.25 seconds.
“Data‑Based Referenced Navigation” (“DBRN”) (7) Systems means systems which use various sources of previously measured geo‑mapping data integrated to provide accurate navigation information under dynamic conditions. Data sources include bathymetric maps, stellar maps, gravity maps, magnetic maps or 3‑D digital terrain maps.
“Deformable mirrors” (6) (also known as adaptive optic mirrors) means mirrors having:
a. A single continuous optical reflecting surface which is dynamically deformed by the application of individual torques or forces to compensate for distortions in the optical waveform incident upon the mirror; or
b. Multiple optical reflecting elements that can be individually and dynamically repositioned by the application of torques or forces to compensate for distortions in the optical waveform incident upon the mirror.
“Depleted uranium” (0) means uranium depleted in the isotope 235 below that occurring in nature.
“Development” (GTN NTN All) is related to all stages prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts.
“Diffusion bonding” (1 2 9) means a solid state molecular joining of at least two separate metals into a single piece with a joint strength equivalent to that of the weakest material.
“Digital computer” (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following:
a. Accept data;
b. Store data or instructions in fixed or alterable (writable) storage devices;
c. Process data by means of a stored sequence of instructions which is modifiable; and
d. Provide output of data.
Technical Note:
Modifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections.
“Digital transfer rate” (5) means the total bit rate of the information that is directly transferred on any type of medium.
N.B.: See also “total digital transfer rate”.
“Direct‑acting hydraulic pressing” (2) means a deformation process which uses a fluid‑filled flexible bladder in direct contact with the workpiece.
“Dynamic adaptive routing” (5) means automatic rerouting of traffic based on sensing and analysis of current actual network conditions.
N.B.: This does not include cases of routing decisions taken on predefined information.
“Dynamic signal analysers” (3) means “signal analysers” which use digital sampling and transformation techniques to form a Fourier spectrum display of the given waveform including amplitude and phase information.
N.B.: See also “signal analysers”.
“Effective gram” (1) of “special fissile material” means:
a. For plutonium isotopes and uranium‑233, the isotope weight in grams;
b. For uranium enriched 1 per cent or greater in the isotope uranium‑235, the element weight in grams multiplied by the square of its enrichment expressed as a decimal weight fraction;
c. For uranium enriched below 1 per cent in the isotope uranium‑235, the element weight in grams multiplied by 0.0001
“Electronic assembly” (2 3 4 5) means a number of electronic components (i.e., ‘circuit elements’, ‘discrete components’, integrated circuits, etc.) connected together to perform (a) specific function(s), replaceable as an entity and normally capable of being disassembled.
Technical Notes:
1. ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
2. ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.
“Electronically steerable phased array antenna” (5 6) means an antenna which forms a beam by means of phase coupling, (i.e., the beam direction is controlled by the complex excitation coefficients of the radiating elements) and the direction of that beam can be varied (both in transmission and reception) in azimuth or in elevation, or both, by application of an electrical signal.
“End‑effectors” (2 ML17) means grippers, ‘active tooling units’ and any other tooling that is attached to the baseplate on the end of a “robot” manipulator arm.
Technical Note:
‘Active tooling units’ are devices for applying motive power, process energy or sensing to the workpiece.
“Energetic materials” (ML 4 ML8 ML908 ML909) mean substances or mixtures that react chemically to release energy required for their intended application. “Explosives”, “pyrotechnics” and “propellants” are subclasses of energetic materials.
“Equivalent Density” (6) means the mass of an optic per unit optical area projected onto the optical surface.
“Expert systems” (7) mean systems providing results by application of rules to data which are stored independently of the “program” and capable of any of the following:
a. Modifying automatically the “source code” introduced by the user;
b. Providing knowledge linked to a class of problems in quasi‑natural language; or
c. Acquiring the knowledge required for their development (symbolic training).
“Explosives” (ML8 ML18 ML909) mean solid, liquid or gaseous substances or mixtures of substances which, in their application as primary, booster, or main charges in warheads, demolition and other applications, are required to detonate.
“Expression Vectors” (ML7) mean carriers (e.g., plasmid or virus) used to introduce genetic material into host cells.
“FADEC” is equivalent to “full authority digital engine control”.
“Fault tolerance” (4) is the capability of a computer system, after any malfunction of any of its hardware or “software” components, to continue to operate without human intervention, at a given level of service that provides: continuity of operation, data integrity and recovery of service within a given time.
“Fibrous or filamentary materials” (0 1 2 8) include:
a. Continuous “monofilaments”;
b. Continuous “yarns” and “rovings”;
c. “Tapes”, fabrics, random mats and braids;
d. Chopped fibres, staple fibres and coherent fibre blankets;
e. Whiskers, either monocrystalline or polycrystalline, of any length;
f. Aromatic polyamide pulp.
“Film type integrated circuit” (3) means an array of ‘circuit elements’ and metallic interconnections formed by deposition of a thick or thin film on an insulating “substrate”.
Technical Note:
‘Circuit element’ is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
“First generation image intensifier tubes” (ML15) means electrostatically focused tubes, employing input and output fibre optic or glass face plates, multi‑alkali photocathodes (S‑20 or S‑25), but not microchannel plate amplifiers.
“Fixed” (5) means that the coding or compression algorithm cannot accept externally supplied parameters (e.g., cryptographic or key variables) and cannot be modified by the user.
“Flight control optical sensor array” (7) is a network of distributed optical sensors, using “laser” beams, to provide real‑time flight control data for on‑board processing.
“Flight path optimisation” (7) is a procedure that minimises deviations from a four‑dimensional (space and time) desired trajectory based on maximising performance or effectiveness for mission tasks.
“Focal plane array” (6) means a linear or two‑dimensional planar layer, or combination of planar layers, of individual detector elements, with or without readout electronics, which work in the focal plane.
Note:This definition does not include a stack of single detector elements or any two, three or four element detectors provided time delay and integration is not performed within the element.
“Fractional bandwidth” (3) means the “instantaneous bandwidth” divided by the centre frequency, expressed as a percentage.
“Frequency hopping” (5) means a form of “spread spectrum” in which the transmission frequency of a single communication channel is made to change by a random or pseudo‑random sequence of discrete steps.
“Frequency switching time” (3 5) means the maximum time (i.e., delay), taken by a signal, when switched from one selected output frequency to another selected output frequency, to reach:
a. A frequency within 100 Hz of the final frequency; or
b. An output level within 1 dB of the final output level.
“Frequency synthesiser” (3) means any kind of frequency source or signal generator, regardless of the actual technique used, providing a multiplicity of simultaneous or alternative output frequencies, from one or more outputs, controlled by, derived from or disciplined by a lesser number of standard (or master) frequencies.
“Full Authority Digital Engine Control” (“FADEC”) (7 9) means an electronic control system for gas turbine or combined cycle engines utilising a digital computer to control the variables required to regulate engine thrust or shaft power output throughout the engine operating range from the beginning of fuel metering to fuel shutoff.
“Gas Atomisation” (1) means a process to reduce a molten stream of metal alloy to droplets of 500 µm diameter or less by a high pressure gas stream.
“Geographically dispersed” (6) ‑ Sensors are considered “geographically dispersed” when each location is distant from any other more than 1,500 m in any direction. Mobile sensors are always considered “geographically dispersed”.
“Guidance set” (7) means systems that integrate the process of measuring and computing a vehicle’s position and velocity (i.e. navigation) with that of computing and sending commands to the vehicle’s flight control systems to correct the trajectory.
“Hot isostatic densification” (2) means the process of pressurising a casting at temperatures exceeding 375 K (102°C) in a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal force in all directions to reduce or eliminate internal voids in the casting.
“Hybrid computer” (4) means equipment which can perform all of the following:
a. Accept data;
b. Process data, in both analogue and digital representations; and
c. Provide output of data.
“Hybrid integrated circuit” (3) means any combination of integrated circuit(s), or integrated circuit with ‘circuit elements’ or ‘discrete components’ connected together to perform (a) specific function(s), and having all of the following characteristics:
a. Containing at least one unencapsulated device;
b. Connected together using typical IC production methods;
c. Replaceable as an entity; and
d. Not normally capable of being disassembled.
Technical Notes:
1. ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
2. ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.
“Image enhancement” (4) means the processing of externally derived information‑bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration.
“Immunotoxin” (1) is a conjugate of one cell specific monoclonal antibody and a “toxin” or “sub‑unit of toxin”, that selectively affects diseased cells.
“In the public domain” (GTN NTN GSN ML22), as it applies herein, means “technology” or “software” which has been made available without restrictions upon its further dissemination (copyright restrictions do not remove “technology” or “software” from being “in the public domain”).
“Information security” (4 5) is all the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intended to safeguard against malfunctions. This includes “cryptography”, ‘cryptanalysis’, protection against compromising emanations and computer security.
Technical Note:
‘Cryptanalysis’ is the analysis of a cryptographic system or its inputs and outputs to derive confidential variables or sensitive data, including clear text.
“Instantaneous bandwidth” (3 5 7) means the bandwidth over which output power remains constant within 3 dB without adjustment of other operating parameters.
“Instrumented range” (6) means the specified unambiguous display range of a radar.
“Insulation” (9) is applied to the components of a rocket motor, i.e. the case, nozzle, inlets, case closures, and includes cured or semi‑cured compounded rubber sheet stock containing an insulating or refractory material. It may also be incorporated as stress relief boots or flaps.
“Interconnected radar sensors” (6) means two or more radar sensors are interconnected when they mutually exchange data in real time.
“Interior lining” (9) is suited for the bond interface between the solid propellant and the case or insulating liner. Usually a liquid polymer based dispersion of refractory or insulating materials, e.g. carbon filled hydroxyl terminated polybutadiene (HTPB) or other polymer with added curing agents sprayed or screeded over a case interior.
“Intrinsic Magnetic Gradiometer” (6) is a single magnetic field gradient sensing element and associated electronics the output of which is a measure of magnetic field gradient.
N.B.: See also “magnetic gradiometer”.
“Isolated live cultures” (1) includes live cultures in dormant form and in dried preparations.
“Isostatic presses” (2) mean equipment capable of pressurising a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a workpiece or material.
“Laser” (0 2 3 5 6 7 8 9 ML5 ML9 ML19) is an assembly of components which produce both spatially and temporally coherent light that is amplified by stimulated emission of radiation.
N.B.: See also: “Chemical laser”;
“Q‑switched laser”;
“Super High Power Laser”;
“Transfer laser”.
“Laser duration” (6) means the time over which a “laser” emits “laser” radiation, which for “pulsed lasers” corresponds to the time over which a single pulse or series of consecutive pulses is emitted.
“Lighter‑than‑air vehicles” (ML10) mean balloons and airships that rely on hot air or on lighter‑than‑air gases such as helium or hydrogen for their lift.
“Linearity” (2) (usually measured in terms of non‑linearity) means the maximum deviation of the actual characteristic (average of upscale and downscale readings), positive or negative, from a straight line so positioned as to equalise and minimise the maximum deviations.
“Local area network” (4) is a data communication system having all of the following characteristics:
a. Allows an arbitrary number of independent ‘data devices’ to communicate directly with each other; and
b. Is confined to a geographical area of moderate size (e.g., office building, plant, campus, warehouse).
Technical Note:
‘Data device’ means equipment capable of transmitting or receiving sequences of digital information.
“Magnetic Gradiometers” (6) are instruments designed to detect the spatial variation of magnetic fields from sources external to the instrument. They consist of multiple “magnetometers” and associated electronics the output of which is a measure of magnetic field gradient.
N.B.: See also “intrinsic magnetic gradiometer”.
“Magnetometers” (6) are instruments designed to detect magnetic fields from sources external to the instrument. They consist of a single magnetic field sensing element and associated electronics the output of which is a measure of the magnetic field.
“Main storage” (4) means the primary storage for data or instructions for rapid access by a central processing unit. It consists of the internal storage of a “digital computer” and any hierarchical extension thereto, such as cache storage or non‑sequentially accessed extended storage.
“Materials resistant to corrosion by UF6” (0) may be copper, stainless steel, aluminium, aluminium oxide, aluminium alloys, nickel or alloy containing 60 weight percent or more nickel and UF6‑ resistant fluorinated hydrocarbon polymers, as appropriate for the type of separation process.
“Matrix” (1 2 8 9) means a substantially continuous phase that fills the space between particles, whiskers or fibres.
“Measurement uncertainty” (2) is the characteristic parameter which specifies in what range around the output value the correct value of the measurable variable lies with a confidence level of 95 %. It includes the uncorrected systematic deviations, the uncorrected backlash and the random deviations (Reference: ISO 10360‑2, or VDI/VDE 2617).
“Mechanical Alloying” (1) means an alloying process resulting from the bonding, fracturing and rebonding of elemental and master alloy powders by mechanical impact. Non‑metallic particles may be incorporated in the alloy by addition of the appropriate powders.
“Melt Extraction” (1) means a process to ‘solidify rapidly’ and extract a ribbon‑like alloy product by the insertion of a short segment of a rotating chilled block into a bath of a molten metal alloy.
N.B.: ‘Solidify rapidly’ means solidification of molten material at cooling rates exceeding 1,000 K/s.
“Melt Spinning” (1) means a process to ‘solidify rapidly’ a molten metal stream impinging upon a rotating chilled block, forming a flake, ribbon or rod‑like product.
N.B.: ‘Solidify rapidly’ means solidification of molten material at cooling rates exceeding 1,000 K/s.
“Microcomputer microcircuit” (3) means a “monolithic integrated circuit” or “multichip integrated circuit” containing an arithmetic logic unit (ALU) capable of executing general purpose instructions from an internal storage, on data contained in the internal storage.
Technical Note:
The internal storage may be augmented by an external storage.
“Microprocessor microcircuit” (3) means a “monolithic integrated circuit” or “multichip integrated circuit” containing an arithmetic logic unit (ALU) capable of executing a series of general purpose instructions from an external storage.
Technical Note:
The “microprocessor microcircuit” normally does not contain integral user‑accessible storage, although storage present on‑the‑chip may be used in performing its logic function.
Note: This definition includes chip sets which are designed to operate together to provide the function of a “microprocessor microcircuit”.
“Microorganisms” (1 2) means bacteria, viruses, mycoplasms, rickettsiae, chlamydiae or fungi, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures.
“Missiles” (1 3 6 7 9) means complete rocket systems and unmanned aerial vehicle systems, capable of delivering at least 500 kg payload to a range of at least 300 km.
“Monofilament” (1) or filament is the smallest increment of fibre, usually several micrometres in diameter.
“Monolithic integrated circuit” (3) means a combination of passive or active ‘circuit elements’ or both which:
a. Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so‑called ‘chip’;
b. Can be considered as indivisibly associated; and
c. Perform the function(s) of a circuit.
Technical Note:
‘Circuit element’ is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
“Monospectral imaging sensors” (6) are capable of acquisition of imaging data from one discrete spectral band.
“Multichip integrated circuit” (3) means two or more “monolithic integrated circuits” bonded to a common “substrate”.
“Multi‑data‑stream processing” (4) means the ‘microprogram’ or equipment architecture technique which permits simultaneous processing of two or more data sequences under the control of one or more instruction sequences by means such as:
a. Single Instruction Multiple Data (SIMD) architectures such as vector or array processors;
b. Multiple Single Instruction Multiple Data (MSIMD) architectures;
c. Multiple Instruction Multiple Data (MIMD) architectures, including those which are tightly coupled, closely coupled or loosely coupled; or
d. Structured arrays of processing elements, including systolic arrays.
Technical Note:
‘Microprogram’ means a sequence of elementary instructions, maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction into an instruction register.
“Multispectral imaging sensors” (6) are capable of simultaneous or serial acquisition of imaging data from two or more discrete spectral bands. Sensors having more than twenty discrete spectral bands are sometimes referred to as hyperspectral imaging sensors.
“Natural uranium” (0) means uranium containing the mixtures of isotopes occurring in nature.
“Network access controller” (4) means a physical interface to a distributed switching network. It uses a common medium which operates throughout at the same “digital transfer rate” using arbitration (e.g., token or carrier sense) for transmission. Independently from any other, it selects data packets or data groups (e.g., IEEE 802) addressed to it. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.
“Neural computer” (4) means a computational device designed or modified to mimic the behaviour of a neuron or a collection of neurons, i.e., a computational device which is distinguished by its hardware capability to modulate the weights and numbers of the interconnections of a multiplicity of computational components based on previous data.
“Noise level” (6) means an electrical signal given in terms of power spectral density. The relation between “noise level” expressed in peak‑to‑peak is given by S 2 pp = 8No(f2‑f1), where Spp is the peak‑to‑peak value of the signal (e.g., nanoteslas), No is the power spectral density (e.g., (nanotesla)2/Hz) and (f2‑f1) defines the bandwidth of interest.
“Nuclear reactor” (0 ML17) means the items within or attached directly to the reactor vessel, the equipment which controls the level of power in the core, and the components which normally contain, come into direct contact with or control the primary coolant of the reactor core.
“Numerical control” (2) means the automatic control of a process performed by a device that makes use of numeric data usually introduced as the operation is in progress (ref. ISO 2382).
“Object code” (9) means an equipment executable form of a convenient expression of one or more processes (“source code” (source language)) which has been converted by programming system.
“Optical amplification” (5), in optical communications, means an amplification technique that introduces a gain of optical signals that have been generated by a separate optical source, without conversion to electrical signals, i.e., using semiconductor optical amplifiers, optical fibre luminescent amplifiers.
“Optical computer” (4) means a computer designed or modified to use light to represent data and whose computational logic elements are based on directly coupled optical devices.
“Optical integrated circuit” (3) means a “monolithic integrated circuit” or a “hybrid integrated circuit”, containing one or more parts designed to function as a photosensor or photoemitter or to perform (an) optical or (an) electro‑optical function(s).
“Optical switching” (5) means the routing of or switching of signals in optical form without conversion to electrical signals.
“Overall current density” (3) means the total number of ampere‑turns in the coil (i.e., the sum of the number of turns multiplied by the maximum current carried by each turn) divided by the total cross‑section of the coil (comprising the superconducting filaments, the metallic matrix in which the superconducting filaments are embedded, the encapsulating material, any cooling channels, etc.).
“Participating State” (7 9) is a state participating in the Wassenaar Arrangement. (See power” (6), means the highest level of power attained in the “laser duration”.
“Personalized smart card” (5) means a smart card containing a microcircuit which has been programmed for a specific application and cannot be reprogrammed for any other application by the user.
“Power management” (7) means changing the transmitted power of the altimeter signal so that received power at the “aircraft” altitude is always at the minimum necessary to determine the altitude.
“Precursors” (ML8) means specialty chemicals used in the manufacture of military explosives.
“Pressure transducers” (2) are devices that convert pressure measurements into an electrical signal.
“Previously separated” (0 1) means the application of any process intended to increase the concentration of the controlled isotope.
“Primary flight control” (7) means an “aircraft” stability or manoeuvering control using force/moment generators, i.e., aerodynamic control surfaces or propulsive thrust vectoring.
“Principal element” (4), as it applies in Category 4, is a “principal element” when its replacement value is more than 35% of the total value of the system of which it is an element. Element value is the price paid for the element by the manufacturer of the system, or by the system integrator. Total value is the normal international selling price to unrelated parties at the point of manufacture or consolidation of shipment.
“Production” (GTN NTN All) means all production phases, such as: construction, production engineering, manufacture, integration, assembly (mounting), inspection, testing, quality assurance.
“Production equipment” (1 7 9) means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for “development” or for one or more phases of “production”.
“Production facilities” (7 9) means equipment and specially designed software therefor integrated into installations for “development” or for one or more phases of “production”.
“Program” (2 4 5 6) means a sequence of instructions to carry out a process in, or convertible into, a form executable by an electronic computer.
“Propellants” (ML8) Substances or mixtures that react chemically to produce large volumes of hot gases at controlled rates to perform mechanical work.
“Pulse compression” (6) means the coding and processing of a radar signal pulse of long time duration to one of short time duration, while maintaining the benefits of high pulse energy.
“Pulse duration” (6) is the duration of a “laser” pulse measured at Full Width Half Intensity (FWHI) levels.
“Pulsed laser” (6) means a “laser” having a “pulse duration” that is less than or equal to 0.25 seconds.
“Pyrotechnic(s)” (ML4 ML8 ML909) means mixtures of solid or liquid fuels and oxidizers which, when ignited, undergo an energetic chemical reaction at a controlled rate intended to produce specific time delays, or quantities of heat, noise, smoke, visible light or infrared radiation. Pyrophorics are a subclass of pyrotechnics, which contain no oxidizers but ignite spontaneously on contact with air.
“Quantum cryptography” (5) means a family of techniques for the establishment of a shared key for “cryptography” by measuring the quantum‑mechanical properties of a physical system (including those physical properties explicitly governed by quantum optics, quantum field theory, or quantum electrodynamics).
“Q‑switched laser” (6) means a “laser” in which the energy is stored in the population inversion or in the optical resonator and subsequently emitted in a pulse.
“Radar frequency agility” (6) means any technique which changes, in a pseudo‑random sequence, the carrier frequency of a pulsed radar transmitter between pulses or between groups of pulses by an amount equal to or larger than the pulse bandwidth.
“Radar spread spectrum” (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo‑random coding.
“Real‑time bandwidth” (2 3) for “dynamic signal analysers” is the widest frequency range which the analyser can output to display or mass storage without causing any discontinuity in the analysis of the input data. For analysers with more than one channel, the channel configuration yielding the widest “real‑time bandwidth” shall be used to make the calculation.
“Real time processing” (6 7) means the processing of data by a computer system providing a required level of service, as a function of available resources, within a guaranteed response time, regardless of the load of the system, when stimulated by an external event.
“Repeatability” (7) means the closeness of agreement among repeated measurements of the same variable under the same operating conditions when changes in conditions or non‑operating periods occur between measurements. (Reference: IEEE STD 528‑2001 (one sigma standard deviation)).
“Required” (GTN 1 9 ML22), as applied to “technology”, refers to only that portion of “technology” which is peculiarly responsible for achieving or extending the controlled performance levels, characteristics or functions. Such “required” “technology” may be shared by different goods.
“Resolution” (2) means the least increment of a measuring device; on digital instruments, the least significant bit (ref. ANSI B‑89.1.12).
“Riot control agents” (ML7) mean substances which, under the expected conditions of use for riot control purposes, rapidly produce in humans sensory irritation or disabling physical effects which disappear within a short time following termination of exposure. (Tear gases are a subset of “riot control agents”.)
“Robot” (2 8 ML17) means a manipulation mechanism, which may be of the continuous path or of the point‑to‑point variety, may use sensors, and has all the following characteristics:
a. Is multifunctional;
b. Is capable of positioning or orienting material, parts, tools or special devices through variable movements in three dimensional space;
c. Incorporates three or more closed or open loop servo‑devices which may include stepping motors; and
d. Has “user‑accessible programmability” by means of teach/playback method or by means of an electronic computer which may be a programmable logic controller, i.e., without mechanical intervention.
Note: The above definition does not include the following devices:
1. Manipulation mechanisms which are only manually / teleoperator controllable;
2. Fixed sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The program is mechanically limited by fixed stops, such as pins or cams. The sequence of motions and the selection of paths or angles are not variable or changeable by mechanical, electronic or electrical means;
3. Mechanically controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The program is mechanically limited by fixed, but adjustable stops, such as pins or cams. The sequence of motions and the selection of paths or angles are variable within the fixed program pattern. Variations or modifications of the program pattern (e.g., changes of pins or exchanges of cams) in one or more motion axes are accomplished only through mechanical operations;
4. Non‑servo‑controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The program is variable but the sequence proceeds only by the binary signal from mechanically fixed electrical binary devices or adjustable stops;
5. Stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval.
“Rotary atomisation” (1) means a process to reduce a stream or pool of molten metal to droplets to a diameter of 500 µm or less by centrifugal force.
“Roving” (1) is a bundle (typically 12–120) of approximately parallel ‘strands’.
Technical Note:
‘Strand’ is a bundle of “monofilaments” (typically over 200) arranged approximately parallel.
“Run‑out” (2) (out‑of‑true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1‑1986, paragraph 5.61).
“Scale factor” (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured. Scale factor is generally evaluated as the slope of the straight line that can be fitted by the method of least squares to input‑output data obtained by varying the input cyclically over the input range.
“Settling time” (3) means the time required for the output to come within one‑half bit of the final value when switching between any two levels of the converter.
“SHPL” (6) is equivalent to “super high power laser”.
“Signal analysers” (3) mean apparatus capable of measuring and displaying basic properties of the single‑frequency components of multi‑frequency signals.
“Signal processing” (3 4 5 6) means the processing of externally derived information‑bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform).
“Software” (GSN All) means a collection of one or more “programs” or ‘microprograms’ fixed in any tangible medium of expression.
N.B.: ‘Microprogram’ means a sequence of elementary instructions, maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction into an instruction register.
“Source code” (or source language) (4 6 7 9) is a convenient expression of one or more processes which may be turned by a programming system into equipment executable form (“object code” (or object language)).
“Spacecraft” (7 9) means active and passive satellites and space probes.
“Space qualified” (3 6) refers to products designed, manufactured and tested to meet the special electrical, mechanical or environmental requirements for use in the launch and deployment of satellites or high altitude flight systems operating at altitudes of 100 km or higher.
“Special fissile material” (0) means plutonium‑239, uranium‑233, “uranium enriched in the isotopes 235 or 233”, and any material containing the foregoing.
“Specific modulus” (0 1 9) is Young’s modulus in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 + 2) K ((23 + 2)oC) and a relative humidity of (50 + 5)%.
“Specific tensile strength” (0 1 9) is ultimate tensile strength in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 + 2) K ((23 + 2)oC) and a relative humidity of (50 + 5)%.
“Splat Quenching” (1) means a process to ‘solidify rapidly’ a molten metal stream impinging upon a chilled block, forming a flake‑like product.
N.B.: ‘Solidify rapidly’ means solidification of molten material at cooling rates exceeding 1,000 K/s.
“Spread spectrum” (5) means the technique whereby energy in a relatively narrow‑band communication channel is spread over a much wider energy spectrum.
“Spread spectrum” radar (6) — see “Radar spread spectrum”.
“Stability” (7) means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time.
“States (not) Party to the Chemical Weapon Convention” (1) are those states for which the Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons has (not) entered into force. (See (3) means a sheet of base material with or without an interconnection pattern and on which or within which ‘discrete components’ or integrated circuits or both can be located.
Technical Notes:
1. ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.
2. ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
“Substrate blanks” (6) means monolithic compounds with dimensions suitable for the production of optical elements such as mirrors or optical windows.
“Sub‑unit of toxin” (1) is a structurally and functionally discrete component of a whole “toxin”.
“Superalloys” (2 9) mean nickel‑, cobalt‑ or iron‑base alloys having strengths superior to any alloys in the AISI 300 series at temperatures over 922 K (649oC) under severe environmental and operating conditions.
“Superconductive” (1 3 6 8 ML18 ML20) means materials, i.e., metals, alloys or compounds, which can lose all electrical resistance, i.e., which can attain infinite electrical conductivity and carry very large electrical currents without Joule heating.
Technical Note:
The “superconductive” state of a material is individually characterised by a “critical temperature”, a critical magnetic field, which is a function of temperature, and a critical current density which is, however, a function of both magnetic field and temperature.
“Super High Power Laser” (“SHPL”) (6) means a “laser” capable of delivering (the total or any portion of) the output energy exceeding 1 kJ within 50 ms or having an average or CW power exceeding 20 kW.
“Superplastic forming” (1 2) means a deformation process using heat for metals that are normally characterised by low values of elongation (less than 20%) at the breaking point as determined at room temperature by conventional tensile strength testing, in order to achieve elongations during processing which are at least 2 times those values.
“Symmetric algorithm” (5) means a cryptographic algorithm using an identical key for both encryption and decryption.
Technical Note:
A common use of “symmetric algorithms” is confidentiality of data.
“System tracks” (6) means processed, correlated (fusion of radar target data to flight plan position) and updated aircraft flight position report available to the Air Traffic Control centre controllers.
“Systolic array computer” (4) means a computer where the flow and modification of the data is dynamically controllable at the logic gate level by the user.
“Tape” (1) is a material constructed of interlaced or unidirectional “monofilaments”, ‘strands’, “rovings”, “tows”, or “yarns”, etc., usually preimpregnated with resin.
Technical Note:
‘Strand’ is a bundle of “monofilaments” (typically over 200) arranged approximately parallel.
“Technology” (GTN NTN All) means specific information necessary for the “development”, “production” or “use” of a product. This information takes the form of ‘technical data’ or ‘technical assistance’. Controlled “technology” for the Dual‑Use List is defined in the General Technology Note and in the Dual‑Use List. Controlled “technology” for the Munitions List is specified in ML22.
Technical Notes:
1. ‘Technical data’ may take forms such as blueprints, plans, diagrams, models, formulae, tables, engineering designs and specifications, manuals and instructions written or recorded on other media or devices such as disk, tape, read‑only memories.
2. ‘Technical assistance’ may take forms such as instruction, skills, training, working knowledge and consulting services. ‘Technical assistance’ may involve the transfer of ‘technical data’.
“Tilting spindle” (2) means a tool‑holding spindle which alters, during the machining process, the angular position of its centre line with respect to any other axis.
“Time constant” (6) is the time taken from the application of a light stimulus for the current increment to reach a value of 1‑1/e times the final value (i.e., 63% of the final value).
“Total control of flight” (7) means an automated control of “aircraft” state variables and flight path to meet mission objectives responding to real time changes in data regarding objectives, hazards or other “aircraft”.
“Total digital transfer rate” (5) means the number of bits, including line coding, overhead and so forth per unit time passing between corresponding equipment in a digital transmission system.
N.B.: See also “digital transfer rate”.
“Tow” (1) is a bundle of “monofilaments”, usually approximately parallel.
“Toxins” (1 2) means toxins in the form of deliberately isolated preparations or mixtures, no matter how produced, other than toxins present as contaminants of other materials such as pathological specimens, crops, foodstuffs or seed stocks of “microorganisms”.
“Transfer laser” (6) means a “laser” in which the lasing species is excited through the transfer of energy by collision of a non‑lasing atom or molecule with a lasing atom or molecule species.
“Tunable” (6) means the ability of a “laser” to produce a continuous output at all wavelengths over a range of several “laser” transitions. A line selectable “laser” produces discrete wavelengths within one “laser” transition and is not considered “tunable”.
“Unmanned aerial vehicle” (“UAV”) (9) means any “aircraft” capable of initiating flight and sustaining controlled flight and navigation without any human presence on board.
“Uranium enriched in the isotopes 235 or 233” (0) means uranium containing the isotopes 235 or 233, or both, in an amount such that the abundance ratio of the sum of these isotopes to the isotope 238 is more than the ratio of the isotope 235 to the isotope 238 occurring in nature (isotopic ratio 0.71 per cent).
“Use” (GTN NTN 1 2 4 5 6 7 8 9 ML21 ML22) means operation, installation (including on‑site installation), maintenance (checking), repair, overhaul and refurbishing.
“User‑accessible programmability” (6) means the facility allowing a user to insert, modify or replace “programs” by means other than:
a. A physical change in wiring or interconnections; or
b. The setting of function controls including entry of parameters.
“Vaccine” (1) is a medicinal product in a pharmaceutical formulation licensed by, or having marketing or clinical trial authorisation from, the regulatory authorities of either the country of manufacture or of use, which is intended to stimulate a protective immunological response in humans or animals in order to prevent disease in those to whom or to which it is administered.
“Vacuum Atomisation” (1) means a process to reduce a molten stream of metal to droplets of a diameter of 500 micrometre or less by the rapid evolution of a dissolved gas upon exposure to a vacuum.
“Variable geometry airfoils” (7) means the use of trailing edge flaps or tabs, or leading edge slats or pivoted nose droop, the position of which can be controlled in flight.
“Yarn” (1) is a bundle of twisted ‘strands’.
Technical Note:
‘Strand’ is a bundle of “monofilaments” (typically over 200) arranged approximately parallel.
ACRONYMS AND ABBREVIATIONS
An acronym or abbreviation, when used as a defined term, will be found in the ‘Definitions of Terms’ section.
ACRONYM OR ABBREVIATION MEANING ABEC Annular Bearing Engineers Committee AGMA American Gear Manufacturers’ Association AHRS attitude and heading reference systems AISI American Iron and Steel Institute ALU arithmetic logic unit ANSI American National Standards Institute ASNO Australian Safeguards and Non‑proliferation Office ASTM the American Society for Testing and Materials ATC air traffic control AVLIS atomic vapour laser isotope separation C3I command, communications, control & intelligence CAD computer‑aided‑design CAS Chemical Abstracts Service CCITT International Telegraph and Telephone Consultative Committee CDU control and display unit CEP circular error probable CNTD controlled nucleation thermal deposition CRISLA chemical reaction by isotope selective laser activation. CVD chemical vapour deposition CW chemical warfare CW (for lasers) continuous wave DEW directed energy weapon systems DME distance measuring equipment DS directionally solidified EB‑PVD electron beam physical vapour deposition EBU European Broadcasting Union ECM electro‑chemical machining ECR electron cyclotron resonance EDM electrical discharge machines EEPROMS electrically erasable programmable read only memory EIA Electronic Industries Association EMC electromagnetic compatibility EMCDB elastomer modified cast double based propellants FFT Fast Fourier Transform GLONASS global navigation satellite system GNSS global navigation satellite system GPS global positioning system HBT hetero‑bipolar transistors HDDR high density digital recording HEMT high electron mobility transistors ICAO International Civil Aviation Organisation IEC International Electro‑technical Commission IEEE Institute of Electrical and Electronic Engineers IFOV instantaneous‑field‑of‑view ILS instrument landing system IRIG inter‑range instrumentation group ISA international standard atmosphere ISAR inverse synthetic aperture radar ISO International Organization for Standardization ITU International Telecommunication Union JIS Japanese Industrial Standard JT Joule‑Thomson LIDAR light detection and ranging LRU line replaceable unit MAC message authentication code Mach ratio of speed of an object to speed of sound (after Ernst Mach) MLIS molecular laser isotopic separation MLS microwave landing systems MOCVD metal organic chemical vapour deposition MPEG Moving Picture Experts Group (ISO/IEC JTC1/SC29/WG11) MRI magnetic resonance imaging MTBF mean‑time‑between‑failures MTTF mean‑time‑to‑failure NBC Nuclear, Biological and Chemical NDT non‑destructive test PAR precision approach radar PIN personal identification number ppm parts per million PSD power spectral density QAM quadrature‑amplitude‑modulation RF radio frequency RPV remotely piloted air vehicle SACMA Suppliers of Advanced Composite Materials Association SAR synthetic aperture radar SC single crystal SLAR sidelooking airborne radar SMPTE Society of Motion Picture and Television Engineers SRA shop replaceable assembly SRAM static random access memory SRM SACMA Recommended Methods SSB single sideband SSR secondary surveillance radar TCSEC trusted computer system evaluation criteria TIR total indicated reading UAV unmanned aerial vehicle UTS ultimate tensile strength UV ultraviolet VOR very high frequency omni‑directional range YAG yttrium/aluminium garnet PART 1 ‑ MUNITIONS LIST
Note 1 Terms in “quotations” are defined terms. Refer to the ‘Definitions of Terms’ section.
Note 2 Chemicals are listed by name and CAS number. Chemicals of the same structural formula (including hydrates) are controlled regardless of name or CAS number. CAS numbers are shown to assist in identifying whether a particular chemical or mixture is controlled, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers.
ML1. Smooth‑bore weapons with a calibre of less than 20 mm, other arms and automatic weapons with a calibre of 12.7 mm (calibre 0.50 inches) or less and accessories, as follows, and specially designed components therefor:
a. Rifles, carbines, revolvers, pistols, machine pistols and machine guns:
Note ML1.a. does not control the following:
1. Muskets, rifles and carbines manufactured earlier than 1938;
2. Reproductions of muskets, rifles and carbines the originals of which were manufactured earlier than 1890;
3.Revolvers, pistols and machine guns manufactured earlier than 1890, and their reproductions;
N.B:. For these goods and specially designed components therefor, see Items ML901, ML903 and ML904.
b. Smooth‑bore weapons, as follows:
1. Smooth‑bore weapons specially designed for military use;
2. Other smooth‑bore weapons, as follows:
a. Of the fully automatic type;
b. Of the semi‑automatic or pump‑action type;
c. Weapons using caseless ammunition;
d. Silencers, special gun‑mountings, clips, weapons sights and flash suppressors for arms controlled by sub‑items ML1.a., ML1.b. or ML1.c.
Note 1 ML1. does not control smooth‑bore weapons used for hunting or sporting purposes. These weapons must not be specially designed for military use or of the fully automatic firing type. For these, see Item ML901.
Note 2 ML1. does not control firearms specially designed for dummy ammunition and which are incapable of firing any controlled ammunition. For these, see Item ML901.
ML1. continued
Note 3 ML1. does not control weapons using non‑centre fire cased ammunition and which are not of the fully automatic firing type. For these, see Item ML901.
Note 4 ML1.d. does not control optical weapon sights without electronic image processing, with a magnification of 4 times or less, provided they are not specially designed or modified for military use.
ML2. Smooth‑bore weapons with a calibre of 20 mm or more, other weapons or armament with a calibre greater than 12.7 mm (calibre 0.50 inches), projectors and accessories, as follows, and specially designed components therefor:
a. Guns, howitzers, cannon, mortars, anti‑tank weapons, projectile launchers, military flame throwers, rifles, recoilless rifles, smooth‑bore weapons and signature reduction devices therefor;
Note 1 ML2.a. includes injectors, metering devices, storage tanks and other specially designed components for use with liquid propelling charges for any of the equipment controlled by ML2.a.
Note 2 ML2.a. does not control the following:
1. Muskets, rifles and carbines manufactured earlier than 1938;
2. Reproductions of muskets, rifles and carbines the originals of which were manufactured earlier than 1890.
b. Military smoke, gas and pyrotechnic projectors or generators.
Note ML2.b. does not control signal pistols.
c. Weapons sights.
ML3. Ammunition and fuze setting devices, as follows, and specially designed components therefor:
a. Ammunition for the weapons controlled by ML1., ML2. or ML12.;
b. Fuze setting devices specially designed for ammunition controlled by ML3.a.
Note 1 Specially designed components include:
a. Metal or plastic fabrications such as primer anvils, bullet cups, cartridge links, rotating bands and munitions metal parts;
b. Safing and arming devices, fuzes, sensors and initiation devices;
c. Power supplies with high one‑time operational output;
d. Combustible cases for charges;
e. Submunitions including bomblets, minelets and terminally guided projectiles.
ML3. continued
Note 2 ML3.a. does not control ammunition crimped without a projectile (blank star) and dummy ammunition with a pierced powder chamber. For this, and other ammunition not covered by Item ML3, see Item ML902.
Note 3 ML3.a. does not control cartridges specially designed for any of the following purposes:
a. Signalling;
b. Bird scaring; or
c. Lighting of gas flares at oil wells.
ML4. Bombs, torpedoes, rockets, missiles, other explosive devices and charges and related equipment and accessories, as follows, specially designed for military use, and specially designed components therefor:
N.B.: For guidance and navigation equipment, see ML11, Note 7.
a. Bombs, torpedoes, grenades, smoke canisters, rockets, mines, missiles, depth charges, demolition‑charges, demolition‑devices and demolition‑kits, “pyrotechnic” devices, cartridges and simulators (i.e. equipment simulating the characteristics of any of these items);
Note ML4.a. includes:
1. Smoke grenades, fire bombs, incendiary bombs and explosive devices;
2. Missile rocket nozzles and re‑entry vehicle nosetips.
b. Equipment having all of the following:
1. Specially designed for military use; and
2. Specially designed for the handling, controlling, activating, powering with one‑time operational output, launching, laying, sweeping, discharging, decoying, jamming, detonating, disrupting, disposing or detecting of any of the following:
a. Items specified by ML4.a.; or
b. Improvised Explosive Devices (IEDs).
Note 1 ML4.b. includes:
a. Mobile gas liquefying equipment capable of producing 1,000 kg or more per day of gas in liquid form;
b. Buoyant electric conducting cable suitable for sweeping magnetic mines.
Note 2 ML4.b. does not apply to hand‑held devices limited by design solely to the detection of metal objects and incapable of distinguishing between mines and other metal objects.
ML4. continued
c. Aircraft Missile Protection Systems (AMPS).
Note ML4.c. does not apply to AMPS having all of the following:
a. Any of the following missile warning sensors:
1. Passive sensors having peak response between 100‑400 nm; or
2. Active pulsed Doppler missile warning sensors;
b. Countermeasures dispensing systems;
c. Flares, which exhibit both a visible signature and an infrared signature, for decoying surface‑to‑air missiles; and
d. Installed on “civil aircraft” and having all of the following:
1. The AMPS is only operable in a specific “civil aircraft” in which the specific AMPS is installed and for which any of the following has been issued:
a. A civil Type Certificate; or
b. An equivalent document recognised by the International Civil Aviation Organisation (ICAO);
2. The AMPS employs protection to prevent unauthorised access to “software”; and
3. The AMPS incorporates an active mechanism that forces the system not to function when it is removed from the “civil aircraft” in which it was installed.
ML5. Fire control, and related alerting and warning equipment, and related systems, test and alignment and countermeasure equipment, as follows, specially designed for military use, and specially designed components and accessories therefor:
a. Weapon sights, bombing computers, gun laying equipment and weapon control systems;
b. Target acquisition, designation, range‑finding, surveillance or tracking systems; detection, data fusion, recognition or identification equipment; and sensor integration equipment;
c. Countermeasure equipment for items controlled by ML5.a. or ML5.b.
d. Field test or alignment equipment, specially designed for items controlled by ML5.a. or ML5.b.
ML6. Ground vehicles and components, as follows:
N.B.: For guidance and navigation equipment, see ML11, Note 7.
a. Ground vehicles and components therefor, specially designed or modified for military use;
Technical Note
For the purposes of ML6.a. the term ground vehicles includes trailers.
ML6.continued
b. All wheel‑drive vehicles capable of off‑road use which have been manufactured or fitted with materials to provide ballistic protection to level III (NIJ 0108.01, September 1985, or comparable national standard) or better.
N.B.: See also ML13.a.
Note 1 ML6.a. includes:
a. Tanks and other military armed vehicles and military vehicles fitted with mountings for arms or equipment for mine laying or the launching of munitions controlled under ML4;
b. Armoured vehicles;
c. Amphibious and deep water fording vehicles;
d. Recovery vehicles and vehicles for towing or transporting ammunition or weapon systems and associated load handling equipment.
Note 2 Modification of a ground vehicle for military use controlled by ML6.a. entails a structural, electrical or mechanical change involving one or more specially designed military components. Such components include:
a. Pneumatic tyre casings of a kind specially designed to be bullet‑proof or to run when deflated;
b. Tyre inflation pressure control systems, operated from inside a moving vehicle;
c. Armoured protection of vital parts, (e.g., fuel tanks or vehicle cabs);
d. Special reinforcements or mountings for weapons;
e. Black‑out lighting.
Note 3 ML6. does not control civil automobiles or trucks designed or modified for transporting money or valuables, having armoured or ballistic protection.
ML7. Chemical or biological toxic agents, “riot control agents”, radioactive materials, related equipment, components, and materials, as follows:
a. Biological agents and radioactive materials “adapted for use in war” to produce casualties in humans or animals, degrade equipment or damage crops or the environment;
b. Chemical warfare (CW) agents including:
1.CW nerve agents:
a. O‑Alkyl (equal to or less than C10, including cycloalkyl) alkyl (Methyl, Ethyl, n‑Propyl or Isopropyl) ‑ phosphonofluoridates, such as:
Sarin (GB):O‑Isopropyl methylphosphonofluoridate
(CAS 107‑44‑8); and
Soman (GD):O‑Pinacolyl methylphosphonofluoridate
(CAS 96‑64‑0);
b. O‑Alkyl (equal to or less than C10, including cycloalkyl)
N,N‑dialkyl (Methyl, Ethyl, n‑Propyl or Isopropyl) phosphoramidocyanidates, such as: Tabun (GA):O‑Ethyl
N,N‑dimethylphosphoramidocyanidate
(CAS 77‑81‑6);
ML7. continued
c. O‑Alkyl (H or equal to or less than C10, including cycloalkyl)
S‑2‑dialkyl (Methyl, Ethyl, n‑Propyl or Isopropyl)‑aminoethyl alkyl (Methyl, Ethyl, n‑Propyl or Isopropyl) phosphonothiolates and corresponding alkylated and protonated salts, such as:
VX: O‑Ethyl S‑2‑diisopropylaminoethyl methyl phosphonothiolate (CAS 50782‑69‑9);
2. CW vesicant agents:
a. Sulphur mustards, such as:
1. 2‑Chloroethylchloromethylsulphide (CAS 2625‑76‑5);
2. Bis(2‑chloroethyl) sulphide (CAS 505‑60‑2);
3. Bis(2‑chloroethylthio) methane (CAS 63869‑13‑6);
4. 1,2‑bis (2‑chloroethylthio) ethane (CAS 3563‑36‑8);
5. 1,3‑bis (2‑chloroethylthio) ‑n‑propane (CAS 63905‑10‑2);
6. 1,4‑bis (2‑chloroethylthio) ‑n‑butane (CAS 142868‑93‑7);
7. 1,5‑bis (2‑chloroethylthio) ‑n‑pentane (CAS 142868‑94‑8);
8. Bis (2‑chloroethylthiomethyl) ether (CAS 63918‑90‑1);
9. Bis (2‑chloroethylthioethyl) ether (CAS 63918‑89‑8);
b. Lewisites, such as:
1. 2‑chlorovinyldichloroarsine (CAS 541‑25‑3);
2. Tris (2‑chlorovinyl) arsine (CAS 40334‑70‑1);
3. Bis (2‑chlorovinyl) chloroarsine (CAS 40334‑69‑8);
c. Nitrogen mustards, such as:
1. HN1: bis (2‑chloroethyl) ethylamine (CAS 538‑07‑8);
2. HN2: bis (2‑chloroethyl) methylamine (CAS 51‑75‑2);
3. HN3: tris (2‑chloroethyl) amine (CAS 555‑77‑1);
3. CW incapacitating agents, such as:
a. 3‑Quinuclidinyl benzilate (BZ) (CAS 6581‑06‑2);
Note 1: For exports to “States not Party to the Chemical Weapons Convention”, ML7 does not control “chemical mixtures” containing 3‑Quinuclindinyl benzilate (BZ) in which BZ does not constitute more than 1% by the weight of the mixture.
Note 2: For exports to “States Party to the Chemical Weapons Convention”, ML7 does not control “chemical mixtures” containing 3‑Quinuclindinyl benzilate (BZ) in which BZ does not constitute more than 30% by the weight of the mixture.
4. CW defoliants, such as:
a. Butyl 2‑chloro‑4‑fluorophenoxyacetate (LNF);
b. 2,4,5‑trichlorophenoxyacetic acid mixed with
2,4‑dichlorophenoxyacetic acid (Agent Orange).
ML7. continued
c. CW binary precursors and key precursors, as follows:
1. Alkyl (Methyl, Ethyl, n‑Propyl or Isopropyl Phosphonyl Difluorides, such as: DF: Methyl Phosphonyldifluoride (CAS 676‑99‑3);
2. O‑Alkyl (H or equal to or less than C10, including cycloalkyl) O‑2‑dialkyl (Methyl, Ethyl, n‑Propyl or Isopropyl) aminoethyl alkyl (Methyl, Ethyl, n‑Propyl or Isopropyl) phosphonites and corresponding alkylated and protonated salts, such as:
QL: O‑Ethyl‑2‑di‑isopropylaminoethyl methylphosphonite
(CAS 57856‑11‑8);
3. Chlorosarin: O‑Isopropyl methylphosphonochloridate
(CAS 1445‑76‑7);
4. Chlorosoman: O‑Pinacolyl methylphosphonochloridate
(CAS 7040‑57‑5);
d. “Riot control agents”, active constituent chemicals and combinations thereof, including:
1. a‑Bromobenzeneacetonitrile, (Bromobenzyl cyanide) (CA)
(CAS 5798‑79‑8);
2. [(2‑chlorophenyl) methylene] propanedinitrile,
(o‑Chlorobenzylidenemalononitrile) (CS) (CAS 2698‑41‑1);
3. 2‑Chloro‑1‑phenylethanone, Phenylacyl chloride
(w‑chloroacetophenone) (CN) (CAS 532‑27‑4);
4. Dibenz‑(b,f)‑1,4‑oxazephine, (CR) (CAS 257‑07‑8);
5. 10‑Chloro‑5,10‑dihydrophenarsazine, (Phenarsazine chloride), (Adamsite), (DM) (CAS 578‑94‑9);
6. N‑Nonanoylmorpholine, (MPA) (CAS 5299‑64‑9);
Note 1 ML7.d. does not control “riot control agents” individually packaged for personal self defence purposes.
tanks for chemical storage
see chemical storage tanks and containers
tantalum and tantalum compounds
chemical handling equipment made with................................................................ 2B350
crucibles coated with........................................................................................... 2A225
tape-laying machines............................................................................................. 1B001
target acquisition systems..................................................................... ML12, ML19, ML5
target damage assessment
see damage assessment systems
TAT (CAS 41378-98-7)........................................................................................... ML8.g.5
TATB (CAS 3058-38-6)......................................................................................... ML8.a.23
TCSEC capability
see trusted computer system evaluation criteria capability
...................................................................................................................................... 0
TEA
see triethylaluminium
tear gases and related equipment and materials
see chemical warfare agents and precursors
see riot control agents
technical military databases libraries, parametric
see parametric technical databases (libraries)
technology............................................................................................ 1E, 2E001, 2E002
for aerospace design and testing................................................................................ 9E
for computer development and use........................................................................ 4E001
for development, production and use of controlled items..................................... 0E, ML22
for flight control.............................................................................................. 7E004.b.5
for integrated circuit manufacture............................................................... 3E001, 3E002
for marine vessels..................................................................................................... 8E
for metal-working processes................................................................................. 2E003
for navigation systems, equipment and components.................................... 7E001, 7E101
for numerical control units.................................................................................... 2E003
for pressure regulation.......................................................................................... 1E103
for security-related equipment and systems........................................................... 5E002
for sensors and detectors.......................................................................................... 6E
for software development and use.......................................................................... 3E101
for telecommunications systems........................................................................... 5E001
TEDDZ................................................................................................................ ML8.a.24
TEGDN
see triethylene glycol dinitrate
telecommunications systems, equipment, components and accessories
see also radio equipment and components
............................................................................................................................... 5A001
telemetering and telecontrol equipment
see also sensors and detectors
............................................................................................................................... 5A101
television systems and equipment
see also video cameras
.............................................................................................................. 5A002, 8A002.d.1
tellurium, in optical sensors................................................................................... 6C002
temperature-rated equipment
computer systems......................................................................................... 4A001.a.1
radar systems..................................................................................................... 6A102
robot systems...................................................................................................... ML17
telecommunications systems.......................................................................... 5A001.a.3
TEMPEST type equipment
see information security systems
see surveillance systems
tension stretchers for composite materials
see also optical fibre, equipment and accessories
............................................................................................................................... 1B101
TEPAN (CAS 68412-45-3)...................................................................................... ML8.f.20
TEPANOL (CAS 68412-46-4)................................................................................. ML8.f.21
TE-PVD
see thermal-evaporation physical vapour deposition technology
terephthalic acid.............................................................................................. 1C008.b.2
terrain contour mapping equipment...................................................................... 6A108
tertiary-butyl substituted phenylene................................................................. 1C008.b.1
teschen disease virus...................................................................................... 1C352.a.14
test tape for recording equipment.......................................................................... 3A002
test, inspection and production equipment
for aerospace and propulsion systems........................................................................ 9B
for composite materials........................................................................................ 1B001
for controlled products........................................................................................... ML18
for directed energy weapons.................................................................................. ML19
for marine vessels and equipment............................................................................... 8B
for materials processing............................................................................................ 2B
for navigation and avionics systems............................................................................ 7B
for security-related equipment and systems........................................................... 5B002
for semiconductor production................................................................................ 3B002
for sensors and lasers............................................................................................... 6B
for telecommunications and security systems........................................................... 5B1
test benches and stands...................................................................................... 9B117
tetraacetyldibenzylhexaazaisowurtzitane
see TAIW
tetraethylenepentaamineacrylonitrile
see TEPAN
tetraethylenepentaamineacrylonitrileglycidol
see TEPANOL
tetramethylhydrazine....................................................................................... 1C111.a.4
tetranitrobenzotriazolobenzotriazole
see TACOT
tetranitroglycoluril
see TNGU
tetranitronaphthalene............................................................................................... ML8
tetranitrosemiglycouril
see K-55
tetrazoles........................................................................................................... ML8.a.25
tetrodotoxin...................................................................................................... 1C351.d.8
tetryl (CAS 479-45-8)........................................................................................... ML8.a.26
thallium arsenic selenide................................................................................. 6C004.b.3
thermal batteries.................................................................................................... 3A102
thermal evaporation physical vapour deposition technology................................ 2E003
thermal imaging equipment
see infrared imaging equipment
thermal ionization mass spectrometers................................................................. 3A233
thermal sensors
see infrared sensors and detectors
thermal-rated equipment
see temperature-rated equipment
thermoplastic liquid crystal copolymers................................................................. 1C008
thermoset resin impregnated continuous materials............................................... 1C210
thickeners
see fuels and propellants and related equipment
thiodiglycol (CAS 111-48-8)..................................................................................... 1C350
thionyl chloride (CAS 7719-09-7)............................................................................. 1C350
thiophosphoryl chloride (CAS 3982-91-0)................................................................ 1C350
three axis magnetic heading sensors.................................................................... 7A103
through-the-wall manipulators............................................................................... 2B225
thrust chambers for rocket propulsion systems...................................................... 9A006
thrust vector control sub-systems................................................................ 9A106, 9A108
thulium--YAG lasers................................................................................................ 6A005
thulium--YSGG lasers............................................................................................. 6A005
thyristors................................................................................................................ 3A001
tick-borne encephalitis virus........................................................................... 1C351.a.14
tilt rotor and tilt wing aircraft
see also aircraft and aircraft components
............................................................................................................................... 9E003
tilting spindles........................................................................................................ 2B008
TIMS
see thermal ionization mass spectrometers
tip shroud castings................................................................ 9B001, 9E003.a.4, 9E003.a.5
titanium, titanium alloys and titanium compounds............... 1C002.b.3, 1C002.c.1, 1C202
borides of titanium............................................................. 1C007, 1C007, 1C007, 1C007
chemical handling equipment made with................................................................ 2B350
coating technology for.......................................................................................... 2E003
diffusion bonding technology for....................................................................... 2E003.b.2
superplastic technology....................................................................... 1B003, 2E003.b.2
titanium aluminides........................................................................................ 1C002.a.2
titanium subhydride........................................................................................... ML8.c.9
titanium tetrachloride (titanium IV) compounds.................................................... ML8.f.15
titanium-doped sapphire....................................................................................... 6C005
titanium--sapphire lasers...................................................................................... 6A005
titanium-stabilised duplex stainless steel............................................................... 1C118
with uranium....................................................................................................... 1C004
TMA
see trimethylaluminium
TMETN
see trimethylolethane trinitrate
TMP
see trimethyl phosphite
TNAD (CAS 135877-16-6)..................................................................................... ML8.a.27
TNAZ (CAS 97645-24-4)....................................................................................... ML8.a.28
TNGU (CAS 55510-03-7)....................................................................................... ML8.a.29
TNP (CAS 229176-04-9)....................................................................................... ML8.a.30
TNT
see 2,4,6-trinitrotoluene
tools
see machine tool equipment, components and assemblies
torpedoes, components and equipment
see also explosives and explosive devices
see also underwater operations equipment
.................................................................................................................................. ML4
torpedo nets........................................................................................................... ML9
towed acoustic hydrophone arrays
see hydrophones
tow-placement machines....................................................................................... 1B001
toxicological agents
see also biological warfare agents
see also chemical warfare agents and precursors
see also protective and decontamination clothing and equipment
........................................................................................................... 1C351, 1C450, ML7
monitoring systems for......................................................................................... 2B351
precursor materials.............................................................................................. 1C350
riot control agents................................................................................................... ML7
TPB (CAS 603-33-8).............................................................................................. ML8.f.22
TPEG
see polytetrahydrofuran polyethylene glycol
tracking systems
see also navigation systems, equipment and components
see also radar systems and components
automatic........................................................................................................... 6A008
for directed energy weapons.................................................................................. ML19
for kinetic energy weapons.................................................................................... ML12
for missiles......................................................................................................... 6A108
trailers
see also land vehicles and components
.................................................................................................................................. ML6
training equipment.................................................................................................. ML14
trajectory technology
see rocket propulsion systems
transceivers
see radio equipment and components
transducers
see also sensors and detectors
.............................................................................................................. 6A001.a.1, 9B008
transfer lasers................................................................................................... 6A005.d.5
transient recorders
see waveform digitisers
transistors for microwave equipment............................................................... 3A001.b.3
transmitters
see radio equipment and components
transposons
see genetic elements
travelling wave tubes....................................................................................... 3A001.b.1
tray exchange towers
see isotope separation plants, systems, equipment and components
triaminoguanidinenitrate
see TAGN
triaminotrinitrobenzene
see TATB
triazines............................................................................................................. ML8.a.31
triazoles............................................................................................................. ML8.a.32
trichloronitromethane....................................................................................... 1C450.a.7
triethanolamine (CAS 102-71-6).............................................................................. 1C350
triethanolamine hydrochloride (CAS 637-39-8)....................................................... 1C350
triethyl phosphite (CAS 122-52-1)............................................................................ 1C350
triethylaluminium...................................................................................................... ML8
triethylene glycol dinitrate (CAS 111-22-8)................................................ 1C111.c.2, ML8
triggered spark-gaps.............................................................................................. 3A228
triisopropyl phosphite (CAS 116-17-6)..................................................................... 1C350
trimethyl phosphite (CAS 121-45-9)......................................................................... 1C350
trimethylaluminium................................................................................................... ML8
trimethylhydrazine........................................................................................... 1C111.a.4
trimethylolethane trinitrate............................................................................... 1C111.c.4
trinitroanisol.............................................................................................................. ML8
trinitroglycerine........................................................................................................ ML8
trinitronaphthalene................................................................................................... ML8
trinitrophenylmethylnitramine
see tetryl
trinitroxylene............................................................................................................ ML8
triol.................................................................................................................... ML8.e.13
triphenyl bismuth
see TPB
tris (2-chloroethyl) amine (CAS 555-77-1)................................................ ML7.b.2, ML7.c.3
tris vinoxy propane adduct
see TVOPA
tris-1-(2-methyl)aziridinyl phosphine oxide
see MAPO and derivatives
tritium......................................................................................................... 1B231, 1C235
True North determination equipment.................................................... 7A003, 7A003.c.1
trusted computer system evaluation criteria capability
see computers, computer assemblies and computer components
tumblers.................................................................................................................. ML18
tunable band-pass filters.................................................................................. 3A001.b.5
tunable lasers
see also laser beam systems
................................................................................................................... 6A005, 6A205
tungsten, tungsten alloys and tungsten compounds
coating technology.............................................................................................. 2E003
spherical particles of............................................................................................ 1C117
tungsten carbide.................................................................................................. 1C226
with uranium....................................................................................................... 1C004
turbine engines
see gas turbine engines
turbocharger systems technology...................................................................... 9E003.f.2
turboexpanders and turboexpander compressors................................................. 1B232
turbofan, turbojet and turboprop engines
see also aero-engines and components
................................................................................................................... 9A101, 9A102
turning machines................................................................................................... 2B001
TV cameras
see video cameras
TVOPA (CAS 53159-39-0).................................................................................... ML8.e.18
two dimensional focal plane arrays
see focal plane arrays
tyres, bullet-proof...................................................................................................... ML6
>>===============================<<
>>U<<
UAVs
see unmanned airborne vehicles, systems and components
UF6
see uranium metal, uranium alloys, and uranium compounds
ultrasonic testing machines, for defect inspection............................................. 1B001.f.2
ultra-wideband modulation equipment............................................................ 5A001.b.4
umbilical cables for submersible vessels......................................................... 8A002.a.3
UN class 1.1 solid propellants.............................................................................. ML8.b.1
UN class 1.3 solid propellants.............................................................................. ML8.b.2
underwater operations equipment
see also acoustic systems, equipment and components
see also submersible vessels, equipment and components
.......................................................................................................................... 8A002.j.1
acoustic location systems.............................................................................. 6A001.a.1
air independent power systems............................................................... 8A002, ML9.b.4
bathymetric survey systems........................................................................... 6A001.a.1
countermeasure equipment.................................................................................... ML11
detection equipment............................................................................................... ML9
electric field sensors............................................................................................ 6A006
laser beam systems....................................................................................... 5A001.b.1
navigation systems............................................................................. 6A001.a.1, 7A008
optical fibre equipment.................................................................................... 5A001.c.2
self-contained diving apparatus................................................................... 8A002, ML17
signal processing equipment........................................................................... 6A001.a.2
syntactic foam.................................................................................................... 8C001
untethered communications systems............................................................... 5A001.b.1
underwater vessels
see submersible vessels, equipment and components
unmanned airborne vehicles, systems and components
see also aircraft and aircraft components
..................................................................................................................... 9A012, ML10
autonomous programmable.............................................................................. ML10.c.1
combustion regulation equipment.......................................................................... 9A118
flight control systems.................................................................... 7E004.b.4, 7E004.b.5
production facilities.............................................................................................. 9B010
pulse jet engines for............................................................................................. 9A111
remotely piloted air vehicles............................................................................. ML10.c.1
software for......................................................................................................... 9D004
turboprop engines for........................................................................................... 9A102
unmanned launchers
see launch and launch support equipment
unmanned submersible vehicles........................................................................... 8A001
unprocessed fluorinated compounds..................................................................... 1C009
unsymmetrical dimethyl hydrazine (CAS 57-14-7)................................................ ML8.c.4
unsymmetrical dimethylhydrazine nitrate........................................................ 1C111.a.4
unsymmetrical diphenylurea
see N,N-diphenylurea
uranium metal, uranium alloys, and uranium compounds.................................... 1C004
conversion plant and equipment............................................................................ 0B003
isotope separation equipment............................................................................... 0B001
>>===============================<<
>>V<<
vacuum atomisation, alloys made by............................................................... 1C002.c.2
vacuum furnaces
see furnaces
vacuum headers.................................................................................................... 0B002
vacuum housings............................................................................................... 0B001.j.3
vacuum manifolds.................................................................................................. 0B002
vacuum microelectronic equipment
see microprocessor, microcontroller and microcomputer microcircuits
vacuum pumps........................................................................................... 0B002, 2B231
vacuum tubes and valves (electronic)........................................ 3A001.b.1, 3A228, 3E003
valves (electronic)
see vacuum tubes and valves (electronic)
valves (mechanical)............................................................................................... 2A226
bellows seal valves.......................................... 0B001.b.13, 0B001.c.6, 0B001.d.6, 2A226
containing aluminium........................................................................................... 2A226
for handling chemicals......................................................................................... 2B350
servo valves............................................................................................. 7A116, 9A106
with fluoroelastomers........................................................................................... 1A001
vanes for gas turbine engines
see also gas turbine engines
............................................................................................. 9B001, 9E003.a.4, 9E003.a.5
vapour deposition equipment........................................................................... 1B101.c.2
Variola virus................................................................................................... 1C351.a.15
vector processors and assemblies.............................................................. 3E002, 4A003
vectors (genetic)
see genetic elements
vehicles
see aircraft and aircraft components
see land vehicles and components
see marine vessels, equipment and components
see spacecraft
see submersible vessels, equipment and components
velocity interferometers......................................................................................... 6A225
Venezuelan equine encephalitis virus............................................................ 1C351.a.16
ventilated full and half (protective clothing) suits
see protective and decontamination clothing and equipment
ventilated propellers
see propellers and propfans
verotoxin producing strains................................................................................... 1C353
verotoxin ribosome inactivating proteins......................................................... 1C351.d.9
vesicant agents.................................................................................................... ML7.b.2
vesicular stomatitis virus................................................................................. 1C352.a.15
vessels of war
see marine vessels, equipment and components
see submersible vessels, equipment and components
vibration test systems, equipment and components................................... 2B116, 9B006
Vibrio cholerae............................................................................................... 1C351.c.12
videcon tubes................................................................................................... 6A203.b.4
video cameras
see also camera systems, camera equipment, and camera components
............................................................................................................................... 6A203
for underwater use.......................................................................................... 8A002.d.1
with solid state sensors.................................................................................. 6A003.b.1
vinylidene fluoride materials...................................................................... 1A001, 1C009
virus cultures
see also animal pathogens
see also human pathogens
see also plant pathogens
.................................................................................................................. 1C351, ML7.i.2
VISARS
see velocity interferometers
viscum album lectin 1..................................................................................... 1C351.d.19
vision systems
see image processing and enhancement equipment
volkensin........................................................................................................ 1C351.d.18
vortex tubes
see isotope separation plants, systems, equipment and components
VX........................................................................................................................ ML7.b.1
>>===============================<<
>>W<<
wafers and wafer handling equipment
see semiconductor manufacturing equipment
warships
see marine vessels, equipment and components
water jet cutting machines
see machine tool equipment, components and assemblies
water tunnels......................................................................................................... 8B001
water-hydrogen sulphide exchange plants.......................... 0B004.a.1, 0B004.b.1, 1B229
water-screw propeller systems
see propellers and propfans
waveform digitisers.......................................................................................... 3A002.a.5
wavelength division multiplexing technology
see coherent optical transmission and detection equipment
wax pattern preparation equipment
see ceramic materials
weapon sights
see sights and sighting equipment
weapons
see ammunition and components
see firearms and firearm components
see missiles
see smooth-bore weapons
...................................................................................................................................... 0
weapons control systems........................................................................... ML21.b.1, ML5
weaving machines, multidimensional................................................................... 1B001
western equine encephalitis virus.................................................................. 1C351.a.17
wet-spinning equipment
see ceramic materials
white pox........................................................................................................ 1C351.a.18
wide-swath bathymetric survey systems
see bathymetric survey systems
wind tunnels.............................................................................. 9B005, 9B105, 9E003.b.1
windows for nuclear radiation shielding
see radiation hardened equipment
work stations
see computers, computer assemblies and computer components
>>===============================<<
>>X<<
Xanthomonas spp............................................................................................. 1C354.b.1
xenon flash-lamp drivers....................................................................................... 3A229
X-ray equipment
see radiographic equipment
xylyl bromide............................................................................................................ ML7
>>===============================<<
>>Y<<
yellow fever virus........................................................................................... 1C351.a.19
Yersinia pestis................................................................................................. 1C351.c.13
yttrium oxide, crucibles coated with................................................................ 2A225.a.2
>>===============================<<
>>Z<<
zinc and zinc compounds
zinc selenide........................................................................................... 6A004, 6C004
zinc sulphide........................................................................................... 6A004, 6C004
zirconium and zirconium compounds.................................................................... 1C234
as propellants................................................................................................ 1C111.a.2
chemical handling equipment made with................................................................ 2B350
in particle form.................................................................................................... 1C011
in powder fuel................................................................................................... ML8.c.5
zirconium dioxide (zirconia).................................................................................. 2E003
zirconium fluoride................................................................................................ 6C004
zirconium oxides................................................................................ 1E.c.1, 2A225.a.2
zirconium tubes for nuclear reactors...................................................................... 0A001
zoonoses
see also animal pathogens
............................................................................................................................... 1C351
>>===============================<<
[1] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established.
[2] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established
[3] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established
[4] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established
[5] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established
[6] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established
[7]Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established
[8] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established
[9] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established
* The numbers in parenthesis refer to the Notes following this Table.
0
0
0