Customs (Prohibited Imports) Regulations (Amendment) (Cth)

Case
No judgment structure available for this case.

Statutory Rules

1978 No.

REGULATIONS UNDER THE CUSTOMS ACT 1901*

I, THE GOVERNOR-GENERAL of the Commonwealth of Australia, acting with the advice of the Federal Executive Council, hereby make the following Regulations under the Customs Act 1901.

Dated this twenty-second day of December 1978.

ZELMAN COWEN

Governor-General

By His Excellency’s Command,

(SGD) WAL FIFE

Minister of State for Business and Consumer Affairs

AMENDMENTS OF THE CUSTOMS (PROHIBITED IMPORTS)

REGULATIONS 

1. After regulation 4k of the Customs (Prohibited Imports) Regulations the following regulation is inserted:

Prohibition of importation of non-metric measuring devices

“ 4l. (1) The importation into Australia of a measuring device for measuring a physical quantity by using any unit of measurement other than a unit of measurement identified on that measuring device—

(a) by a name or symbol of a unit comprised in the International System of Units for the time being approved by the General Conference on Weights and Measures;

(b) by a name or symbol of a unit decimally related to a unit of measurement referred to in paragraph (a) and for the time being so approved, being a unit the name or symbol of which is prefixed by—

(i) exa or E;

(ii) peta or P;

(iii) tera or T;

* Notified in the Commonwealth of Australia Gazette on 29 December 1978.

  Statutory Rules 1950 No. 90 as amended by Statutory Rules 1958 Nos. 6 and 67; 1959 Nos. 17, 31 and 93; 1960 No. 22; 1961 No. 117; 1962 No. 82; 1963 No. 26; 1964 Nos. 25 and 39; 1965 Nos. 81, 91, 135, 167 and 190; 1966 No. 95; 1967 Nos. 41, 51, 114 and 178; 1963 Nos. 100, 141 and 161; 1969 Nos. 2, 7, 10, 39, 43 and 218; 1970 Nos. 8, 72, 105 and 194; 1972 No. 97; 1973 Nos. 5, 6, 42, 43, 89, 93, 162, 175, 217, 227, 228 and 262; 1974 Nos. 123 and 249; 1975 Nos. 58, 62, 121, 172 and 183; 1976 Nos. 98, 159, 186 and 291; 1977 Nos. 18, 23, 24, 59, 67 and 162.

14519/78 Cat. No. —Recommended retail price 20c 20/14.12.1978

 

(iv) giga or G;

(v) mega or M;

(vi) kilo or k;

(vii) milli or m;

(viii) micro or μ;

(ix) nano or n;

(x) pico or p;

(xi) femto or f; or

(xii) atto or a;

(c) by the name or symbol of—

(i) the litre, the sievert or the rem;

(ii) a unit decimally related to the litre, the sievert or the rem, being a unit the name or symbol of which is prefixed in the manner referred to in paragraph (b); or

(iii) a unit, being a time rate of change of a unit referred to in sub-paragraph (i) or (ii), expressed as a rate per second, a rate per minute, a rate per hour or a rate per day;

(d) by a name specified in Column 2 of Schedule 9; or

(e) by a symbol specified in Column 3 of Schedule 9,

is prohibited unless a permission in writing to import that measuring device has been granted by the Minister of State for Science and the Environment or an authorized officer and the permission is produced to the Collector.

“ (2) Permission to import a measuring device under sub-regulation (1) shall not be granted unless the Minister of State for Science and the Environment or an authorized officer is satisfied that the measuring device—

(a) is essential for the repair, maintenance or modification of existing plant or machinery;

(b) will be used to perform a function for which there is a continuing need to use a unit of measurement other than a unit of measurement identified in a manner referred to in sub-regulation (1);

(c) measures a physical quantity by using a unit of measurement—

(i) required by law; or

(ii) required by an established technical standard,

and an equivalent measuring device for measuring a physicalquantity by using a unit of measurement identified in a manner referred to in sub-regulation (1) cannot be used; or

 

(d) will, without being used in Australia, be exported within a period of 12 months after the date of importation into Australia.

“ (3) Sub-regulation (1) does not apply to a measuring device that—

(a) is an integral part of another device other than a device that is itself intended to be used to measure a physical quantity;

(b) is part of the personal effects or household goods imported by a person who is a passenger or a member of the crew of a ship or aircraft;

(c) uses only descriptive words to indicate a range of values of a physical quantity;

(d) is graduated in percentages or in pure numbers;

(e) is imported into Australia as a single item for use as a replacement part in industrial plant, machinery or equipment;

(f) is imported into Australia for repair or recalibration and will be exported on completion of that work;

(g) is imported into Australia to fulfil a contract with the Commonwealth for the supply, repair, maintenance or modification of equipment for military use by the Defence Force; or

(h) is included in a class of measuring devices described in Column 2 of Schedule 10.

“ (4) A reference in this regulation to an authorized officer shall be read as a reference to an officer of the Department of Science and the Environment authorized in writing by the Minister of State for Science and the Environment for the purposes of this regulation.”.

Third Schedule

2. The Third Schedule to the Customs (Prohibited Imports) Regulations is amended—

(a) by omitting sub-clauses (i) and (ii) of clause (b) of paragraph 2 in the third column in item 6 and substituting the following sub-clauses:

“ (i) from 35° Celsius to 42° Celsius, both inclusive (in this paragraph referred to as an ‘ordinary range thermometer ’) ; or

(ii) from 25° Celsius to 40° Celsius, both inclusive (in this paragraph referred to as a ‘sub-normal range thermometer ’) ;”; and

(b) by omitting clauses (f) and (h) of paragraph 2 in the third column in item 6.

 

Schedules 9. and 10

3. After the Eighth Schedule to the Customs (Prohibited Imports) Regulations the following Schedules are added:

SCHEDULE 9 Sub-regulation 4l (1)

NAMES AND SYMBOLS OF UNITS OF MEASUREMENT

Column 1

Column 2

Column 3

Item

Name

Symbol

1

degree.............................................................................................................

°

2

minute............................................................................................................

3

second............................................................................................................

4

degree Celsius...............................................................................................

°C

5

hour................................................................................................................

h

6

minute……………………………………………………………….

min

7

kilometre per hour.......................................................................................

km/h

8

revolution per second..................................................................................

r/s

9

revolution per minute..................................................................................

r/min

10

centimetre......................................................................................................

cm

11

square centimetre.........................................................................................

cm2

12

cubic centimetre...........................................................................................

cm3

13

decibel............................................................................................................

dB

14

electronvolt...................................................................................................

eV

15

kiloelectronvolt.............................................................................................

keV

16

megaelectronvolt.........................................................................................

MeV

17

gigaelectronvolt............................................................................................

GeV

18

tonne..............................................................................................................

t

19

tonne per cubic metre..................................................................................

t/m3

20

kilogram per litre..........................................................................................

kg/L or kg/l

21

gram per litre.................................................................................................

g/L or g/l

22

mole per litre.................................................................................................

mol/L or mol/l

23

millimole per litre.........................................................................................

mmol/L or mmol/l

24

micromole per litre.......................................................................................

μ mol/L or μ mol/l

25

nanomole per litre.........................................................................................

nmol/L or nmol/l

26

reciprocal litre...............................................................................................

1/L

27

nautical mile..................................................................................................

n mile

28

knot................................................................................................................

kn

29

tex...................................................................................................................

tex

30

kilotex............................................................................................................

ktex

31

decitex............................................................................................................

dtex

32

kilogram per hectolitre................................................................................

kg/hL or kg/hl

33

kilowatt hour.................................................................................................

kW.h

34

megawatt hour..............................................................................................

MW.h

35

gigawatt hour................................................................................................

GW.h

36

kilogram per hectare...................................................................................

kg/ha

37

tonne per hectare..........................................................................................

t/ha

38

litre per hectare............................................................................................

L/ha or l/ha

39

millilitre per hectare....................................................................................

mL/ha or ml/ha

40

square decimetre..........................................................................................

dm2

41

millimetre of mercury.................................................................................

mmHg

42

gram per second...........................................................................................

g/s

43

gram per minute...........................................................................................

g/min

44

gram per hour...............................................................................................

g/h

45

gram per day.................................................................................................

g/d

46

kilogram per second....................................................................................

kg/s

47

kilogram per minute....................................................................................

kg/min

48

kilogram per hour........................................................................................

kg/h

49

kilogram per day..........................................................................................

kg/d

50

tonne per second..........................................................................................

t/s

51

tonne per minute..........................................................................................

t/min

52

tonne per hour...............................................................................................

t/h

53

tonne per day................................................................................................

t/d

54

cubic metre per second...............................................................................

m3/s

55

cubic metre per minute...............................................................................

m3/min

56

cubic metre per hour....................................................................................

m3/h

57

cubic metre per day.....................................................................................

m3/d

 

SCHEDULE 10 Paragraph 4l (3) (h)

MEASURING DEVICES TO WHICH SUB-REGULATION 4l (1) DOES NOT APPLY

Column 1

Column 2

Item

Class of measuring devices

1

Precision instruments or gauges being devices of a kind used for measuring in engineering metrology, whether mechanical, electrical or electronic, namely—

(a) micrometers;

(b) vernier calipers and vernier height gauges;

(c) depth and height gauges;

(d) dial gauges and dial test indicators;

(e) comparators;

(f) feeler gauges;

(g) gauge blocks and accessories;

(h) length bars and accessories;

(i) plain and taper plug gauges;

(j) plain and taper ring gauges;

(k) gap gauges;

(l) profile gauges;

(m) spline and serration gauges;

(n) screw thread measuring devices;

(o) parallel and taper screw plug gauges and accessories;

(p) parallel and taper screw ring gauges;

(q) parallel and taper adjustable thread gauges;

(r) gear and hob checking and measuring devices

2

Measuring devices for checking or calibrating a measuring device of a type specified in item 1

3

Measuring tapes for the mining industry having a length of 50 feet or more and having a scale graduated in—

(a) feet; and

(b) decimals of a foot,

with or without graduations in metric units of measurement of length

4

Manometers for measuring a head of fluid having a scale graduated in—

(a) millimetres;

(b) centimetres; or

(c) metres

5

Pressure gauges for medical or clinical apparatus having a scale graduated in—

(a) millimetres of water;

(b) centimetres of water; or

(c) millimetres of mercury,

with or without graduations in pascals or kilopascals

6

Reference pressure gauges for testing or calibrating other pressure gauges having a scale graduated in—

(a) any units of measurement of pressure other than—

(i) bars; or

(ii) kilograms force per square centimetre; and

(b) pascals, kilopascals or megapascals

7

Tyre pressure gauges and air pumps having a scale graduated in—

(a) kilopascals; and

(b) pounds force per square inch

8

Pressure switches, regulators or transducers not having a graduated scale but having an operating value or range that is indicated in—

(a) pascals;

(b) kilopascals; or

(c) megapascals,

with or without the operating value or range indicated in pounds per square inch

9

Temperature switches, regulators, thermostats and thermistors not having a graduated scale but having an operating value that is indicated in—

(a) kelvins; or

(b) degrees Celsius

with or without the operating value or range indicated in degrees Fahrenheit or degrees Rankine

 

SCHEDULE 10—continued

Column 1

Column 2

Item

Class of measuring devices

10

Torque measuring devices including torque wrenches and torque screwdrivers having a scale graduated in newton metres or kilonewton metres and—

(a) pounds force inches;

(b) pounds force feet; or

(c) pounds force inches and pounds force feet

11

Devices for the calibration of torque measuring devices described in item 10

12

Engine performance-testing equipment, including compression testers and dynamometers having a scale graduated in a unit of measurement identified in a manner referred to in sub-regulation 4l (1) with or without graduations in an imperial unit of measurement

13

Reference flow meters for testing or calibrating other flow meters having a scale graduated in—

(a) a unit of measurement identified in a manner referred to in sub-regulation 4l (1); and

(b) gallons per second, gallons per minute, gallons per hour or gallons per day

14

Devices having a visual display of numbers produced electronically to represent the measurement of a physical quantity in a unit of measurement identified in a manner referred to in sub-regulation 4l (1) and having a mechanism of a kind that enables that measurement to be displayed in another unit of measurement

15

Ionic concentration meters, including pH meters

16

Kitchen scales and measuring jugs graduated in—

(a) a unit of measurement identified in a manner referred to in sub-regulation 4l (1); and

(b) an imperial unit of measurement

17

Hydrometers having a scale with graduations that represent a percentage of a substance being measured, including alcoholometers and Brix hydrometers.

18

Hydrometers having a scale graduated in degrees Baumé

19

Measuring instruments for installation in, or attachment to—

(a) an aircraft cockpit control panel; or

(b) an aircraft simulator control panel

20

Barometers having a scale graduated in—

(a) millibars; or

(b) millibars and kilopascals

21

Instruments for testing the operation of hydraulic systems being instruments graduated in—

(a) a unit of measurement identified in a manner referred to in sub-regulation 4l (1); and

(b) an imperial unit of measurement

22

Weights for dead weight testers designated in a unit of measurement of pressure other than—

(a) bars;

(b) kilograms force per square centimetre; or

(c) atmospheres

Printed by Authority by the Commonwealth Government Printer

Actions
Download as PDF Download as Word Document


Cases Citing This Decision

0

Cases Cited

0

Statutory Material Cited

0