Currency (Royal Australian Mint) Determination 2008 (No. 7) (Cth)
Currency (Royal Australian Mint) Determination 2008 (No. 7)
Currency Act 1965
I, NICK SHERRY, Minister for Superannuation and Corporate Law, make this Determination under subsection 13A (1) of the Currency Act 1965.
Dated 16 September 2008
NICK SHERRY
Minister for Superannuation and Corporate Law
Name of Determination
This Determination is the Currency (Royal Australian Mint) Determination 2008 (No. 7).
Commencement
This Determination commences on the day after it is registered.
Specifications of coins
For subsection 13A (1) of the Currency Act 1965, each item in Schedule 1 specifies:
(a) the denomination of a coin; and
(b) the coin’s standard composition; and
(c) the coin’s standard weight, and the allowable variation from that weight; and
(d) the coin’s dimensions; and
(e) the coin’s design.
Application of Determination
The specifications in Schedule 1 do not affect any other determination of the specifications of a coin.
Schedule 1 Specifications of coins
(section 3)
| Item 1 | $1 coin |
| Denomination | $1 |
| Standard composition | At least 99.9% silver |
| Standard weight and allowable variation | 31.635 g ± 0.500 g |
| Maximum diameter | 40.15 mm |
| Maximum thickness | 3.50 mm |
| Shape | Circular |
| Edge | Continuously milled |
| Obverse design | An effigy of Queen Elizabeth II, and the initials ‘IRB’, surrounded by the inscriptions: (a) ‘ELIZABETH II’; and (b) ‘AUSTRALIA 2009’. |
| Reverse design | A design consisting of: (a) in the centre — a representation of an ox; and (b) around the outside: (i) a representation of two phoenixes facing one another; and (ii) the inscriptions: (A) ‘1 DOLLAR’; and (B) ‘1 oz .999 silver’. |
| Item 2 | $10 coin |
| Denomination | $10 |
| Standard composition | At least 99.99% gold |
| Standard weight and allowable variation | 3.110 g + 0.020 g, ‑ 0.000 g |
| Maximum diameter | 17.65 mm |
| Maximum thickness | 1.58 mm |
| Shape | Circular |
| Edge | Continuously milled |
| Obverse design | An effigy of Queen Elizabeth II, and the initials ‘IRB’, surrounded by the inscriptions: (a) ‘ELIZABETH II’; and (b) ‘AUSTRALIA 2009’. |
| Reverse design | A design consisting of: (a) in the centre — a representation of an ox; and (b) around the outside: |
(i) a representation of two phoenixes facing one another; and
| (ii) the inscriptions: (A) ‘10 DOLLARS’; and (B) ‘1/10 oz .9999Au’. | |
| Item 3 | $25 coin |
| Denomination | $25 |
| Standard composition | At least 99.99% gold |
| Standard weight and allowable variation | 15.792 g + 0.240 g, ‑ 0.000 g |
| Maximum diameter | 30.10 mm |
| Maximum thickness | 1.80 mm |
| Shape | Circular |
| Edge | Continuously milled |
| Obverse design | An effigy of Queen Elizabeth II, and the initials ‘IRB’, surrounded by the inscriptions: (a) ‘ELIZABETH II’; and (b) ‘AUSTRALIA 2009’. |
| Reverse design | A design consisting of: (a) in the centre — a representation of an ox; and (b) around the outside: |
(i) a representation of two phoenixes facing one another; and
| (ii) the inscriptions: (A) ‘25 DOLLARS’; and (B) ‘1/2 oz .9999Au’. |
Note
1. All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See
0
0
0