Cootamundra Local Environmental Plan 2013 (Amendment No 1) (2015-16) LW 23 January 2015 (NSW)

New South Wales

Cootamundra Local Environmental Plan 2013

(Amendment No 1)

under the

Environmental Planning and Assessment Act 1979

I, the Minister for Planning, make the following local environmental plan under the

Environmental Planning and Assessment Act 1979.

KEN TRETHEWEY, GENERAL MANAGER,

COOTAMUNDRA SHIRE COUNCIL

As delegate for the Minister for Planning

Cootamundra Local Environmental Plan 2013 (Amendment No 1)

under the

Environmental Planning and Assessment Act 1979

1      Name of Plan

This Plan is Cootamundra Local Environmental Plan 2013 (Amendment No 1).

2      Commencement

This Plan commences on the day on which it is published on the NSW legislation website.

3      Land to which Plan applies

(1)

To the extent this Plan removes a heritage item known as Begley’s Store, the Plan

applies to land at 30 Hibernia Street, Stockinbingal, being Lot 1, DP 110542.

(2)

To the extent this Plan rezones land from Zone R1 General Residential to Zone IN2

Light Industrial, the Plan applies to the following land:

(a)	land at 2 Sutton Street, Cootamundra, being Lots 1–4, DP 724913 and Lot 1, DP 948674,
(b)	land at 29 Yass Road, Cootamundra, being Lot 1, DP 530890.

(3)	To the extent this Plan deals with lot sizes for dual occupancies, multi dwelling housing and residential flat buildings, the Plan applies to all land in Zone R1 General Residential and Zone R3 Medium Density Residential.
(4)	To the extent this Plan permits development with consent for the purposes of a service station, the Plan applies to land in Zone B3 Commercial Core and Zone IN2 Light Industrial.

4      Maps

The maps adopted by Cootamundra Local Environmental Plan 2013 are amended or replaced, as the case requires, by the maps approved by the Minister on the making of this Plan.

Schedule 1

Amendment of Cootamundra Local

Environmental Plan 2013

[1]      Land Use Table

Omit “Service stations;” from item 4 of the matter relating to Zone B3 Commercial Core and Zone IN2 Light Industrial.

[2]      Clause 4.1A

Insert after clause 4.1AA:

4.1A

Minimum lot sizes for dual occupancies, multi dwelling housing and

residential flat buildings

(1)

The objective of this clause is to achieve planned residential density in certain

zones.

(2)

Development consent may be granted to development on a lot in a zone shown in Column 2 of the table to this clause for a purpose shown in Column 1 of the table opposite that zone, if the area of the lot is equal to or greater than the area specified for that purpose and shown in Column 3 of the table.

Column 1	Column 2	Column 3
Dual occupancy (attached)	Zone R1 General Residential	700 square metres
or Zone R3 Medium Density Residential
Dual occupancy (detached)	Zone R1 General Residential	850 square metres
or Zone R3 Medium Density Residential
Multi dwelling housing	Zone R1 General Residential	1,000 square metres
or Zone R3 Medium Density Residential
Residential flat building	Zone R1 General Residential	1,000 square metres
or Zone R3 Medium Density Residential

[3]      Schedule 5 Environmental heritage

Omit all matter relating to item I74.