Civil Aviation Amendment Regulations 2001 (No. 2) (Cth)

Civil Aviation Amendment Regulations 2001 (No. 2)1

Statutory Rules 2001 No. 2422

I, PETER JOHN HOLLINGWORTH, Governor-General of the Commonwealth of Australia, acting with the advice of the Federal Executive Council, make the following Regulations under the Civil Aviation Act 1988.

Dated 29 August 2001

PETER HOLLINGWORTH

Governor-General

By His Excellency’s Command

JOHN ANDERSON

Minister for Transport and Regional Services

1Name of Regulations

 These Regulations are the Civil Aviation Amendment Regulations 2001 (No. 2).

2Commencement

 These Regulations commence on gazettal.

3Amendment of Civil Aviation Regulations 1998

Schedule 1 amends the Civil Aviation Regulations 1998.

Schedule 1Amendments

(regulation 3)

  

[1]Regulation 21.0

omit

21.830 Heater assembly of manned balloon must carry identification mark

insert

21.830 Heater assembly of manned free balloon must carry identification mark

[2]Regulation 21.0

omit

21.870 Exemption from obligation to mark

insert

21.870 Identification of parts if marking is impracticable

[3]Subparagraph 21.132A (2) (a) (ii)

substitute

• (ii)

  are approved by:

  • (A)

    CASA; or

  • (B)

    an authorised person; or

  • (C)

    if the product is manufactured under an agreement with a foreign manufacturer for supply to that manufacturer — the NAA of the relevant foreign country; and

[4]Paragraph 21.133 (2) (a)

substitute

• (a)

  the person has an agreement with a foreign manufacturer to:

  • (i)

    manufacture a Class I, Class II, Class III or unapproved Class I product; and

  • (ii)

    supply the product to the foreign manufacturer; and

[5]Paragraphs 21.820 (2) (b) and (c)

substitute

• (b)

  the identification number of the aircraft’s type certificate (if any);

• (c)

  the identification number of the production certificate (if any) under which the aircraft is manufactured;

[6]Paragraph 21.820 (4) (a)

omit

manned balloon

insert

manned free balloon

[7]Regulation 21.820, note

omit

manned balloon,

insert

manned free balloon,

[8]Paragraphs 21.825 (3) (b) and (c)

omit

[9]Regulation 21.825, note

omit

manned balloon,

insert

manned free balloon,

[10]Regulation 21.830, heading

substitute

21.830Heater assembly of manned free balloon must carry identification mark

[11]Subregulation 21.830 (1)

omit

manned balloon

insert

manned free balloon

[12]Regulation 21.830, note

omit

manned balloon,

insert

manned free balloon,

[13]Paragraphs 21.835 (3) (b) and (c)

substitute

• (b)

  the identification number of the engine’s type certificate (if any);

• (c)

  the identification number of the production certificate (if any) under which the engine is manufactured;

[14]Paragraphs 21.840 (5) (b) and (c)

substitute

• (b)

  the identification number of the type certificate (if any) of the propeller; and

• (c)

  the identification number of the production certificate (if any) under which the propeller is manufactured; and

[15]Paragraph 21.865 (4) (d)

substitute

• (d)

  the part’s serial number (if any); and

• (e)

  the name and model designation of each type certificated product to which the part may be fitted.

[16]Regulation 21.870, heading

substitute

21.870Identification of parts if marking is impracticable

[17]Subregulation 21.870 (3), note

omit

[18]After subregulation 21.870 (3)

insert

• (4)

  If CASA and the holder agree that it is impracticable to provide the information mentioned in paragraph 21.865 (4) (e) in the authorised release certificate that is supplied with the part, or with each container of the parts, the holder is not guilty of an offence under subregulation (3) if:

  • (a)

    the information is included in a document that is published by the holder and available to any person who fits the part to an aircraft; and

  • (b)

    the authorised release certificate identifies the document.

Note For the definition ofauthorised release certificate, see the Dictionary.

[19]Regulation 45.000

omit

45.060 Number and location of sets of markings — manned balloons

insert

45.060 Number and location of sets of markings — manned free balloons

[20]Regulation 45.060, heading

substitute

45.060Number and location of sets of markings — manned free balloons

[21]Subregulation 45.060 (1)

omit

manned balloon

insert

manned free balloon

[22]Subregulation 45.065 (3), table, item 4

substitute

4

Manned free balloon 500

[23]Paragraph 45.150 (2) (a)

omit

manned balloon

insert

manned free balloon

[24]Dictionary, Part 1, definition of manned balloon

substitute

manned free balloon means a free balloon that:

• (a)

  is capable of carrying 1 or more persons; and

• (b)

  is equipped with controls that enable the altitude of the balloon to be controlled.

[25]Dictionary, Part 1, definition of unmanned balloon

substitute

unmanned free balloon means a balloon other than a manned free balloon.

Notes

1. These Regulations amend Statutory Rules 1998 No. 237, as amended by 1999 Nos. 166 (as amended by 1999 No. 262) and 262; 2000 Nos. 7, 204 (Item [7] of Schedule 2 was disallowed by the Senate on 8 November 2000) and 227; 2001 No. 34.

2. Notified in the Commonwealth of Australia Gazette