CASA EX05/08 Exemption display of markings and carriage of identification plates (Cth)

Instrument number CASA EX05/08

I, SHANE PATRICK CARMODY, Deputy Chief Executive Officer, Strategy and Support, a delegate of CASA, make this instrument under regulation 11.160 of the Civil Aviation Safety Regulations 1998 (CASR 1998).

[Signed S. Carmody]

Shane Carmody
Deputy Chief Executive
Strategy and Support

31 January 2008

Exemption — display of markings and carriage of identification plates

1          Duration

            This instrument:

(a)   commences on the day after it is registered; and

(b)   stops having effect at the end of January 2010.

2          Application

            This instrument applies to Australian fixed wing aircraft and rotorcraft with maximum take-off weight of less than 5 700 kg operating wholly within Australian territory (the aircraft).

3          Exemption

             The aircraft is exempt from compliance with the following requirements:

(a) subregulation 45.045 (1) of CASR 1998 to the extent mentioned in Schedule 1;

(b) subregulation 45.145 (1) of CASR 1998 subject to the condition mentioned in Schedule 2;

(c) subparagraph 45.065 (3) (b) (ii) and item 1 of paragraph 45.065 (3) (c) of CASR 1998 subject to the condition mentioned in Schedule 3.

Schedule 1          Extent of exemption

            The exemption extends only to display markings on the under surface of the port wing or across the under surface of both wings.

Schedule 2          Condition

The aircraft must carry a manufacturer’s data plate as required by regulation 21.820 of CASR 1998.

Schedule 3          Condition

            The minimum height must be 150 millimetres.