Bounty (Injection-moulding Equipment) Regulations (Amendment) (Cth)

Statutory Rules 1983 No.1071

________________

Bounty (Injection-moulding Equipment) Regulations2 (Amendment)

I, THE GOVERNOR-GENERAL of the Commonwealth of Australia, acting with the advice of the Federal Executive Council, hereby make the following Regulations under the Bounty (Injection-moulding Equipment) Act 1979.

Dated 13 July 1983.

N. M. STEPHEN

Governor-General

By His Excellency's Command,

JOHN N. BUTTON

Minister of State for Industry and Commerce

–––––––––––

Conditions of manufacture

1. Regulation 3 of the Bounty (Injection-moulding Equipment) Regulations is amended by omitting paragraph (b) and substituting the following paragraph:

"(b) the number allotted to an item of injection-moulding equipment shall be clearly stamped on that item by means of a die or clearly stamped or embossed on a label that is securely affixed to that item;".

Application

2. Regulation 1 applies in relation to the numbering of items of injection-moulding equipment on or after 23 July 1982.

 

NOTES

1. Notified in the Commonwealth of Australia Gazette on 22 July 1983.

2. Statutory Rules 1982 No. 176.