Airworthiness Directives 2004 - Revocation and Remaking - Transavia PL 12 Series Aeroplanes (Cth)

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a)      revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b)      make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

David Villiers

Delegate of the Civil Aviation Safety Authority

 20 December 2004

Note:   Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1           Revocation and Remaking of

Airworthiness Directives

Transavia PL 12 Series Aeroplanes

AD Name  AD Number

Nose Landing Gear Upper and Lower Pivot Support Assemblies - Inspection    AD/PL 12/1 Amdt 2

Aerodynamic Surfaces - Modification  AD/PL 12/2

Longitudinal Trim Augmenter  AD/PL 12/3 Amdt 1

Stub Wing Structure - Inspection  AD/PL 12/4

Rudder Pedal Assemblies - Inspection  AD/PL 12/5

Nose Wheel Pivot Leg  AD/PL 12/6 Amdt 3

Fuel Tank - Modification  AD/PL 12/7

Stub Wing Spar  AD/PL 12/8 Amdt 3

Superseded by AD/PL-12/15  AD/PL 12/9

Engine Mount Tube - Inspection  AD/PL 12/10

Nose Wheel Pivot Pin - Inspection and Replacement  AD/PL 12/11 Amdt 1

Cockpit Overturn Structure  AD/PL 12/12 Amdt 3

Nose Wheel Pivot Assembly - Inspection  AD/PL 12/13

Nose Landing Gear Pivot Pin and Bushes  AD/PL 12/14 Amdt 1

Landing Gear Lower Pivot Lug  AD/PL 12/15 Amdt 1

Engine Mount Tube  AD/PL 12/16 Amdt 1

Pilot Compartment/Restraint - Modification  AD/PL 12/17

Landing Gear Oleo Assemblies  AD/PL 12/18 Amdt 1

Stub Wing Internal Structure - Inspection and Re-Protection  AD/PL 12/19

Main Wing and Stub Wing Fatigue Life Limitation  AD/PL 12/20 Amdt 3